What to do if the Jaguar boss key doesn't work?

1 Answers
JosephineLee
07/30/25 8:59am
Go to a 4S shop to replace a new one. The boss key is the button next to the front passenger seat that adjusts the seat, allowing rear passengers to easily control the front passenger seat's position. Essentially, it's a control key in the rear seats that can move the front passenger seat forward or backward and adjust the seatback angle. Typically, the boss sits in the rear, and to gain more space, the boss will move the front passenger seat forward. The Jaguar XEL is a new model launched by the British Jaguar brand in 2017. The new car largely retains the design style of the XE model, including the Jaguar family-style front grille and sharp headlight clusters on both sides. Additionally, the lines around the air intakes on both sides of the front bumper are smoother. The rear of the Jaguar XEL also follows the design of the current XE model, featuring a dual-exhaust layout.
Was this review help?
10
4
Share
More Forum Discussions

What is the tutorial for changing coolant in Wuling Hongguang?

The tutorial for changing coolant in Wuling Hongguang is: 1. Unscrew the radiator cap, open the radiator drain valve, and drain the coolant; 2. Clean the cooling system by continuously injecting clean water into the engine cooling system. During the flushing process, keep the engine idling to ensure the circulation of clean water inside until clean water flows out from the radiator; 3. Stop injecting clean water, wait for the clean water to drain completely, then close the drain valve; 4. Add new coolant until the liquid level is between the max and min marks. The functions of coolant are: 1. Provide anti-freeze protection for the engine against low-temperature environments; 2. Provide efficient heat dissipation; 3. Prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block and cylinder head when parking in cold winter.
4
3
Share

Where is the ISOFIX interface on the Buick Encore?

The ISOFIX interface on the Buick Encore is located in a relatively deep position at the intersection of the seat and the backrest. The method to detach the ISOFIX interface is as follows: 1. Adjust the safety seat headrest to its highest position; 2. Press the shoulder strap adjuster and adjust the shoulder strap to its limit; 3. Open the buckle and separate the shoulder straps left and right; 4. Fasten the buckle and adjust the shoulder strap to the bottom; 5. Push the seat inward and simultaneously press the red buttons on the ISOFIX interface to remove it. The ISOFIX interface complies with European standards and is also an internationally popular standard. When using a safety seat with this interface, you only need to connect the seat's ISOFIX interface with the vehicle's interface, making the installation relatively simple.
20
4
Share

How to Switch Back to Celsius on a Peugeot 307?

The method to switch back to Celsius on a Peugeot 307 is: Press the MENU button beside the display, select UNITS, then press OK to enter the temperature unit and fuel consumption unit settings. Choose Celsius, and it will automatically take effect after about 10 seconds. Taking the 2013 Peugeot 307 as an example, its body dimensions are: length 4212mm, width 1762mm, height 1531mm, wheelbase 2608mm, fuel tank capacity 60L, and trunk capacity 1440L. The 2013 Peugeot 307 is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 117PS, maximum power speed of 6000rpm, maximum torque of 150Nm, and is paired with a 5-speed manual transmission.
5
3
Share

How to Shift Gears in Wuling Hongguang Mini?

Wuling Hongguang Mini gear shifting positions: 1. P gear is the parking gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear; 5. M gear refers to the manual mode; 6. L gear is the low gear; 7. S gear is the sport mode. Taking the 2021 Wuling Hongguang Mini as an example, its body dimensions are: length 2920mm, width 1493mm, height 1621mm, wheelbase 1940mm, and curb weight 665kg. The 2021 Wuling Hongguang Mini has a MacPherson independent front suspension and a multi-link non-independent rear suspension. It is equipped with a permanent magnet synchronous motor with a total power of 20kw, paired with a 1-speed fixed gear ratio transmission.
1
0
Share

What are the reasons for coolant leakage in a car?

The reasons for coolant leakage in a car are: 1. Radiator damage, poor sealing of the upper and lower water chambers; 2. Loose connections and poor sealing at the overflow tank, water pump joint surface, and cooling system pipelines; 3. Cylinder gasket damage, poor flatness between the cylinder head and cylinder block. The effects of coolant leakage on the engine include: 1. Causing the engine to overheat; 2. Leading to cylinder scuffing, wear, and irreversible damage; 3. Corrosion of components inside the engine compartment. The functions of car coolant are: 1. Providing anti-corrosion protection for cooling system components; 2. Preventing scale formation to avoid reducing the radiator's cooling efficiency; 3. Ensuring the engine operates within the normal temperature range.
9
3
Share

What Causes the Water Temperature Warning Light to Illuminate While Driving?

The reason the water temperature warning light illuminates while driving is: the water temperature is too high. The car's water temperature gauge indicates whether the engine's cooling system is functioning properly, and it consists of a pointer, scale, and the letters 'C' and 'H'. The function of the car's water temperature gauge is to display the temperature of the coolant in the engine's water jacket during operation, with the scale unit in degrees Celsius. When the engine starts, the water temperature gauge should indicate no less than 50 degrees Celsius, and during normal driving, the normal reading should be between 70 and 90 degrees Celsius. If the water temperature is too high, the water temperature warning light will illuminate. The water temperature indicator light is used to alert the temperature of the coolant inside the engine, displaying different effects by color: blue indicates low water temperature, red indicates high water temperature, and no light indicates normal conditions.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.