What to Do If the Interior Fabric Comes Off?

1 Answers
DelAlan
07/29/25 7:05pm
Purchase a specialized automotive adhesive or bonding product, apply the glue along the edge after peeling it open, let it dry for 3-5 minutes, and then press it back into place. If the center of the headliner is sagging or coming off and it's inconvenient to remove, you can opt for a clip repair.
Was this review help?
2
3
Share
More Forum Discussions

Why can't the fuel gauge be filled up?

Here are the specific reasons why the car fuel gauge cannot be filled up: 1. If the refueling speed is too fast, it will generate expanding steam, and the gasoline vapor cannot be released in time. If the carbon canister solenoid valve is closed at this time, the gasoline vapor in the carbon canister will accumulate more and more. After the gun jumps, the gasoline vapor will push the gasoline stored between the fuel filler and the fuel tank out of the fuel filler, causing choking, but the fuel tank is not full at this time. It is necessary to check the working condition of the carbon canister and the carbon canister solenoid valve. 2. There is a problem with the oil dipstick in the fuel tank. It is necessary to check whether the oil dipstick is damaged. 3. The fuel gun is inserted too deep. The gun jumping is the small hole at the fuel gun mouth, which will jump and cut off the fuel when it cannot suck in air.
17
5
Share

Can the first maintenance of the Atenza exceed 5,000 kilometers?

The first maintenance of the Atenza cannot exceed 5,000 kilometers. Relevant details are as follows: 1. The maintenance manual for the Atenza specifies that the first maintenance should be done at 5,000 kilometers or 3 months, whichever comes first. Exceeding the mileage or time for the first maintenance may result in the 4S store refusing the warranty due to overdue; 2. The warranty period for the entire Atenza vehicle is 3 years or 100,000 kilometers, whichever comes first; 3. The warranty period for wear-and-tear parts is 6 months or 10,000 kilometers, whichever comes first; 4. The warranty period for the battery is 1 year with no mileage limit; 5. The warranty period for the remote key battery and wiper blades is 3 months with no mileage limit.
14
1
Share

How to Determine if a Car is Domestic or Imported?

Cars can be identified as domestic or imported by checking the Vehicle Identification Number (VIN). Below are the specific details about the VIN: 1. Among the 17 characters of the VIN, the first 3 characters represent the vehicle's production country, manufacturer, and car type respectively. 2. Characters 4 to 8 of the VIN indicate the vehicle's features, such as the vehicle category, body type, engine type, and gross vehicle weight rating. 3. The 9th character is a check digit used to verify the accuracy of the VIN. 4. The 10th character represents the production year, indicating which year the vehicle was manufactured. 5. The 11th character denotes the vehicle's assembly location, with '0' indicating original factory assembly. 6. Characters 12 to 17 of the VIN are the production serial number. This is used by manufacturers to recall vehicles with quality issues, as recalls are typically based on production serial numbers.
3
2
Share

What is the tire pressure range for the Lavida?

The normal tire pressure range for the Lavida is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Lavida does not allow manual activation of the tire pressure monitoring system because it operates automatically and does not require activation. If the tire pressure is abnormal, the system will automatically alert the driver. This type of tire pressure monitoring system is indirect, using wheel speed sensors to detect the rotation speed of the wheels and then determining whether the tire pressure is normal based on the wheel speed data. To check the tire pressure, prepare a tire pressure gauge, locate the factory tire pressure label, press the gauge onto the tire valve to measure the pressure, and read the value. Remember to replace the valve cap after checking the tire pressure. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion, affecting braking performance; causes steering wheel vibration and misalignment, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and misalignment, compromising driving safety; increases movement of tire components, leading to excessive rolling and abnormal heat generation; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible causes: Abnormal tire pressure: Typically, the system alerts if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to illuminate. Simply reset the tire pressure monitoring system. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire valve. If the sensor is damaged during driving (e.g., by hitting a curb), the tire pressure warning light may come on. For sensor damage, the only solution is to replace it with a new one.
12
2
Share

Why does the Volkswagen horn not work?

Volkswagen horn not working is due to contact point erosion. Prolonged pressing of the horn can easily cause the horn contacts to erode, creating resistance. This reduces the current flowing through the electromagnetic coil, resulting in a hoarse sound or complete failure. Poor sealing makes it prone to moisture, and water vapor can easily cause the contacts to get damp and malfunction. Additionally, poor contact at the electromagnetic coil terminals can be a cause. Recommendations for car horn usage: When washing the car, be sure to prevent the horn from getting wet. If the horn gets wet, dry it with an air gun as soon as possible. Avoid prolonged pressing of the horn, as this can lead to premature erosion of the contacts. If the horn malfunctions, seek help from a professional technician rather than blindly replacing the horn, which can cause unnecessary waste. Volkswagen horn polarity: Right side is positive, left side is negative.
8
5
Share

Where is the fuel pump relay of Chery Flagcloud 2 located?

Chery Flagcloud 2 fuel relay is inside a black box next to the computer. The Flagcloud 2 fuel relay is located under the front hood, inside the engine compartment, in the black box between the upper left corner of the battery and next to the computer. Possible causes of Chery Flagcloud 2 fuel relay failure: Damaged fuel pump check valve: No residual pressure, causing difficulty in starting. Worn centrifugal pump impeller: Reduced fuel supply pressure, resulting in poor acceleration. Worn carbon brushes: Fuel pump stops rotating, unable to start. In such cases, tapping the bottom of the fuel tank may allow the pump to operate. Mechanical faults such as rotor jamming: Increased operating current of the fuel pump, causing relay or fuse damage. Flagcloud 2 fuel consumption: 7.0 liters/100km.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.