What to do if the Haval H6 transmission fails?

1 Answers
Edwin
07/29/25 8:43pm
It may be a failure of the transmission computer or electronic components. Go to a professional repair shop for inspection and replace the damaged electronic components. If the transmission oil contains impurities or is severely insufficient, add or replace the transmission oil, and have a professional conduct a comprehensive inspection of the transmission to completely eliminate the problem.
Was this review help?
4
3
Share
More Forum Discussions

What are the reasons for an automatic transmission not shifting up?

Automatic transmission not shifting up may be caused by improper adjustment of the throttle cable or throttle position sensor, leading to governor failure. Diagnosis and repair methods: Perform fault self-diagnosis on the electronically controlled automatic transmission; readjust the throttle cable or throttle position sensor according to standards; inspect the vehicle speed sensor and replace if damaged; check the gear position switch signal and adjust or replace if abnormal; measure governor oil pressure - if it remains at 0 or very low when vehicle speed increases, it indicates governor failure or severe leakage in the governor oil circuit. Maintenance methods: The addition of automatic transmission fluid (ATF) must be strictly controlled. The ATF level must be between the bottom of the planetary gears and above the control valve body. When the fluid level is too high, the planetary gears' agitation will cause the ATF to foam, potentially leading to oil leakage during driving. When the oil level is too low, the clutches and brakes are prone to slipping.
12
2
Share

What is the normal tire pressure for winter tires?

The tire pressure for winter tires should be around 2.6bar. There isn't a significant difference in tire pressure between winter tires and regular tires. Whether in summer or winter, the tire pressure remains the same as long as it's maintained within the normal range. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Tire pressure reset method: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete.
14
2
Share

What is the suitable RPM for a new car during the break-in period?

The RPM for a new car during the break-in period should be determined based on specific conditions: 1. Within the first 500 kilometers, keep the RPM below 2300; 2. From 500 to 1000 kilometers, maintain the RPM under 3000; 3. From 1000 to 1500 kilometers, do not exceed 3500 RPM. Precautions for using a new car during the break-in period include: 1. Warm up the engine before starting; 2. Avoid emergency braking; 3. Prevent overloading; 4. Avoid long-distance trips; 5. Do not drive at high speeds; 6. Use high-quality gasoline; 7. Do not remove the speed limiter prematurely; 8. Shift gears in a timely manner; 9. Properly adjust the ignition and fuel supply systems.
16
5
Share

What are the approach angle and departure angle of the BMW X5?

BMW X5 has an approach angle of 25.2 degrees and a departure angle of 22.3 degrees. Approach angle: Refers to the angle between the ground and a line tangent to the front tires when the vehicle is fully loaded and stationary, measured from the foremost protruding point of the front end. Departure angle: Refers to the angle between the ground and a line tangent to the rear tires when the vehicle is fully loaded and stationary, measured from the rearmost protruding point of the rear end. BMW X5 performance specifications: The BMW X5 3.0i is equipped with a dual overhead camshaft inline 6-cylinder engine, paired with a 6-speed automatic transmission (ATM+Steptronic). It has a displacement of 2979ml and a fuel consumption of 12.9 liters per 100 kilometers. The body dimensions are 4857×1933×1776mm, with a wheelbase of 2933mm.
3
4
Share

What is the fuel consumption per 100 kilometers of the Fabia?

The average fuel consumption per 100 kilometers of the Fabia is 6.0~9.3L. MIIT fuel consumption: The comprehensive fuel consumption of the Fabia 1.4L automatic transmission model as per the Ministry of Industry and Information Technology (MIIT) is 6L/100km; the Fabia 1.4L manual transmission model's MIIT comprehensive fuel consumption is 5.8L/100km; the Fabia 1.6L automatic transmission model's MIIT comprehensive fuel consumption is 6.2L/100km. Personal fuel consumption: According to the driving conditions of car owners, the fuel consumption range of the Fabia 1.4L manual transmission model is 5.57-7.15L/100km, with an average fuel consumption of 6.36L/100km; the 1.4L automatic transmission model's fuel consumption range is 6.42-8.61L/100km, with an average fuel consumption of 7.52L/100km; the 1.6L automatic transmission model's fuel consumption range is 6.76L/100km, with an average fuel consumption of 6.36L/100km.
7
3
Share

What are the requirements for upgrading a driver's license?

The requirements vary depending on the type of vehicle you wish to upgrade to. For upgrading from a C1 license to a B1 license, the conditions include holding the C1 license for at least 3 years, being between 21 and 50 years old, having no record of full-point deductions in the last 3 scoring cycles before application, and ensuring consistency in information such as ID card, driver's license, and address. Requirements for upgrading to a medium-sized bus driving license: Having held a license for driving city buses, large trucks, small cars, small automatic transmission vehicles, low-speed trucks, or three-wheeled vehicles for at least 3 years, with no record of 12-point deductions in the last 3 consecutive scoring cycles before application. Requirements for upgrading to a tractor driving license: Having held a medium-sized bus or large truck driving license for at least 3 years, or a large passenger vehicle driving license for at least 1 year, with no record of 12-point deductions in the last 3 consecutive scoring cycles before application.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.