···
Log in / Register

What to do if the glass is foggy?

4 Answers
LandonFitz
07/29/25 8:59am
Here are some related introductions on how to deal with foggy glass: 1. Clean with a plastic brush: Use a new plastic brush for cleaning. Soak the brush completely in water and then wipe the glass directly. The plastic brush has strong cleaning power and is long enough to reach the outer side of the glass, making it easy to remove dust. Additionally, this type of plastic brush is easy to disassemble and clean. If the glass is not thoroughly cleaned, you can also add some detergent to the water to wipe the glass, then rinse it with clean water. 2. Wipe with a wet cloth: First, simply wipe the glass with a wet cloth. Then, pour a little liquor onto a dry cloth and wipe the obvious stains on the glass with slightly more force. If you don't have liquor at home, you can also mix shampoo with a small amount of water, stir well, soak a cloth in the mixture, and wipe the windows. Then, use a clean cloth to remove the water stains, and the entire glass will be bright and clean. 3. Remove dust with old newspapers: The simplest way to remove dust from glass is to use old newspapers. If you have unused newspapers at home, don't throw them away. You can wet the unused newspapers and use them to scrub stains on the glass. Newspapers can effectively remove dust and make the glass clean. 4. Wipe with onion: You can use fresh onions to wipe the glass, making it clean and bright. You can also use baking soda mixed with water to scrub the glass. The key is to quickly wipe off the water stains with a dry towel while the glass is still wet.
Was this review help?
9
4
Share
Edith
08/12/25 7:54am
I'm used to using the A/C's cold air to quickly defog. Turn on the A/C button, set it to external circulation, and blow cold air toward the windshield—the fog clears in seconds. If it's too cold in winter, you can switch to warm air for defogging, but you'll have to endure the fog worsening for the first few dozen seconds. When there are many people in the car and the breathing humidity is high, it's best to open the windows in advance to allow air circulation and prevent fogging. I always keep a chamois cloth in my car to wipe the glass anytime—it works quickly but doesn't last long. Before parking, I always turn off the heater and open the windows to ventilate, so the glass won't have condensation the next day. With more rain this month, I've found that wiping the glass with a mix of dish soap and water can prevent fogging for two to three weeks.
Was this review help?
2
4
Share
Expand All
DeElliana
10/06/25 3:04am
I find the car defogging button super handy. There's a fan-shaped icon on the center console. When pressed, the AC automatically increases airflow to the windshield, perfect for sudden fogging while driving. Just remember to set the temperature a few degrees higher than outside to prevent re-fogging from temperature differences. For rear window fogging, press the rectangular button with heating wires. Newer models even allow voice temperature control - just say 'increase by two degrees'. I use anti-fog spray on windows every two months, making sure to wipe it evenly after application. Avoid leaving wet umbrellas in the car, and immediately absorb any water on floor mats. Sunny day ventilation is crucial - letting moisture evaporate prevents fogging.
Was this review help?
15
1
Share
Expand All
PeterDella
11/19/25 4:30am
My trick is prevention first. Shake off rain and snow from shoes before getting in the car, and never place wet coats on the seats. Keep the air circulation on external mode with fan speed at level 2 while driving. When washing the car, specifically instruct to clean the oil stains on the inside of the windshield, as fingerprint residues here easily cause fogging. If the glass appears white on rainy days, turn on the A/C cold air for five seconds to fix it. When temporarily parked, leave a slight window gap; closing the door too quickly can trap moisture and cause fogging. I've often heard people say applying soapy water prevents fog, but after trying three times, the effect wasn't reliable. Recently, I switched to anti-fog wipes, which are quite convenient.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What does BORGWARD BX7 28T mean?

BORGWARD BX7 28T means that the BORGWARD BX7 model uses a 2.0T engine. Diesel Engine Oil: There are two main factors in selecting the quality grade of diesel engine lubricating oil. First, it is based on the sum of the mechanical load and thermal load of the automobile engine, expressed by the intensification coefficient; second, it is based on the severity of the engine operating conditions. Gasoline Engine Oil: The selection of the appropriate performance grade (quality grade) of gasoline engine oil is based on the severity of the engine operating conditions, the additional devices in the intake and exhaust systems of imported cars, and the production year. Generally speaking, a higher quality grade can replace a lower quality grade of oil, but a lower quality grade of oil must never be used to replace a higher quality grade, as this may cause engine failure or even damage.
6
3
Share

Is the chassis of the Nissan Sylphy a bit low?

Nissan's new Sylphy has a relatively low chassis height, designed for lightweight purposes, which makes it appear somewhat thin. Introduction to New Energy Vehicle Batteries: New energy vehicles commonly use ternary lithium batteries, which have the advantages of high energy capacity and low pollution. Lithium iron batteries can discharge for about six times longer than alkaline manganese batteries. Compared to nickel-metal hydride batteries, they provide more stable discharge voltage and significantly better storage time. Lifespan of New Energy Vehicle Batteries: The lifespan of new energy vehicle batteries is generally 8 years, with a driving range of 150,000 to 200,000 kilometers. Maintaining a steady driving speed can extend the battery's lifespan, while aggressive driving can cause some damage to the battery.
13
4
Share

How to Distinguish the Three Wires of a Hall Speed Sensor?

Hall speed sensor three-wire differentiation method is as follows: 1. The Hall gear sensor has three wires, which are red, yellow, and black in color, representing power negative, power positive, and signal output line respectively. 2. The Hall sensor generates a rectangular wave signal with a high level of 5V/8V. Depending on the speed, the number of waveforms appearing within each fixed time period varies. Signal measurement method: Rotate the flexible shaft (signal source) and read the waveform with an oscilloscope. 3. The Hall sensor is installed on the output shaft of the transmission, outputting a fixed number of pulses per revolution. The vehicle speed is calculated through the gear ratio between the sensor and the output shaft, and the rolling radius of the wheel. There are also electromagnetic sensors. 4. The Hall gear sensor is a new type of sensor made based on the Hall effect principle, featuring a waterproof round tube design. It senses the teeth of ferrous metal gears or racks and converts them into voltage pulse signals to measure parameters such as object speed and rotation speed. It is widely used in the new generation of automotive intelligent engines as a speed sensor for ignition timing and in ABS (Anti-lock Braking System) as a vehicle speed sensor.
11
1
Share

Why does the Lavida dashboard speed keep flashing?

Lavida dashboard speed keeps flashing because the overspeed warning is set. The importance of overspeed warning: The ultimate purpose of vehicle speed limit is to prevent greater personal injuries and unnecessary safety accidents caused by driving too fast. Safe driving is everyone's responsibility during the journey. How to modify the overspeed warning: Press the right wiper lever, first press button a to reset the warning speed. Then toggle the upper end of switch B to increase the warning speed. Directly increase it to the desired speed - each press increases by 5km, then press button a again to confirm the setting.
9
4
Share

Is it normal for the Civic to start at 1500 RPM?

Civic starting at 1500 RPM is normal. Related principle: When the car is idling, the RPM of 1500 is controlled by the electromechanical system to increase fuel injection, allowing the engine's lubrication and cooling systems to start working. All cars need to wait for the RPM to drop to 700-800 after a cold start before driving at high speeds. How to get on the road quickly: In winter, it can take more than 5 minutes for the engine coolant temperature to rise, which consumes too much fuel. Therefore, you can start the engine for two or three minutes, engage the gear, and drive slowly for about 2 minutes before starting to drive on the road.
9
0
Share

What brand is the shock absorber for the new Santana?

The brand of the shock absorber for the new Santana is Shanghai Huizhong Sachs. Introduction to Shock Absorbers: Shock absorbers are used to suppress the oscillation of the spring after absorbing shocks and impacts from the road surface. They are widely used in automobiles to accelerate the attenuation of frame and body vibrations, thereby improving the ride comfort of the vehicle. When driving on uneven roads, although the shock-absorbing spring can filter out road vibrations, the spring itself still undergoes reciprocating motion, and the shock absorber is used to suppress this spring bounce. Working Principle: Most shock absorbers used in automotive suspension systems are hydraulic shock absorbers. Their working principle is that when relative motion occurs between the frame (or body) and the axle due to vibration, the piston inside the shock absorber moves up and down, causing the oil in the shock absorber chamber to repeatedly flow from one chamber to another through different orifices.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.