What to do if the fuel cap of Golf 7 won't open?

2 Answers
DiLillian
07/24/25 2:36pm
The solution to the fuel cap of Golf 7 not opening is to replace the electronic valve. It is recommended to go to a 4S store or a professional auto repair shop for replacement in time. Golf 7 refers to the 7th generation product of Golf, with body dimensions of 4255 mm in length, 1799 mm in width, and 1452 mm in height. In terms of power, Golf 7 is equipped with three turbocharged engines: 1.2T, 1.4T, and 2.0T. The 1.2T engine has a maximum power of 81kw and a maximum torque of 200nm, matched with a 7-speed dual-clutch transmission. In terms of suspension, Golf 7 adopts a combination of front MacPherson independent suspension and rear torsion beam non-independent suspension.
Was this review help?
2
0
Share
LaSebastian
08/11/25 8:21am
When driving a Volkswagen Golf 7, I've encountered situations where the fuel cap wouldn't open, usually due to the lock cylinder getting stuck in cold or humid weather. First, make sure the car doors are unlocked since the fuel cap lock is connected to the door system. Try pressing the unlock button on the car key or the control button inside the car, then gently press the edge of the fuel cap to see if it loosens. If that doesn't work, I usually spray some WD-40 lubricant on the lock cylinder or apply a hot water bag to expand the parts, waiting patiently for a few minutes before trying again. Never force it open to avoid scratching the paint or damaging the lock mechanism. The Golf 7's fuel cap is designed to be quite tight, so remember to regularly clean off dust or grease during maintenance to prevent rust; in winter, it's best to wipe off moisture with a dry cloth. If you still can't manage it, drive to a 4S shop—they have specialized tools to handle it quickly. This common issue often occurs in older models or cars left unused for long periods. Proper use of lubricant can save a lot of trouble.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What are the testing indicators for turbine oil?

The testing indicator for turbine oil is PH=7.5. Below is an introduction to related aspects of engine oil: 1. Increased fuel consumption: When adding engine oil, the oil level should be between the upper and lower marks on the dipstick. If too much oil is added, the engine's temperature will rise, causing the oil volume to expand, increasing the pressure in the oil chamber and operational resistance. This can lead to reduced vehicle power and increased fuel consumption. 2. Overfilling oil: Excessive oil can cause the crankcase breather pipe to leak oil, increasing crankcase pressure. The oil seal may loosen due to the oil pressure, leading to oil leaks. 3. Heat dissipation: Overfilling oil can affect the engine's heat dissipation.
7
3
Share

What does replacing the assembly mean?

Replacing the assembly refers to the replacement of the entire integrated unit of the car, including the internal combustion engine, starter, oil pump, etc. After replacement, it becomes a fully functional machine. Advantages of replacing the assembly in a car: In automotive repairs, the assembly replacement method is sometimes adopted. This involves removing a specific assembly from the car and replacing it with a new or repaired and inspected assembly, thereby reducing repair time and improving the organization and quality of the repair work. Impact of replacing the assembly on the vehicle: Mid-use replacement of the assembly is generally performed at repair shops or 4S stores. The replaced engine is not the original one but a reassembled version using the old engine block. The details of such replacements are certainly not as refined as the original factory assembly. Disassembling and reassembling the engine can affect wiring and other components, introducing many uncertainties in later use.
9
3
Share

Are There Any Disadvantages to Coating Windshield Washer Fluid?

The drawbacks of coating windshield washer fluid: Although it has the ability to form a coating, the duration of the coating is not long, and the film formed on the glass is irregular with very limited thickness. During use, it may not achieve the desired coating effect, and the resulting film may instead impair driving visibility and experience. Coating windshield washer fluid is a cleaning solution for car windshields, made from deionized water and various environmentally friendly additives. It has functions such as dirt removal, antifreeze, antistatic, and corrosion resistance. Below are specific details about coating windshield washer fluid: 1. Coating effect: Coating windshield washer fluid has the ability to form a protective film on the glass surface with long-term use. In rainy weather, it prevents water from sticking, providing drivers with stable and clear visibility, thereby enhancing driving safety to some extent. 2. Cleaning effect: Coating windshield washer fluid can provide a cleaning effect when driving in rain or snow, maintaining good visibility.
4
0
Share

What causes the Passat to shake at idle but not when accelerating?

The reasons why the Passat shakes at idle but not when accelerating are as follows: 1. Severe carbon buildup inside the engine: This is often manifested as carbon deposits on the throttle body, fuel injectors, spark plugs, and pistons. When these carbon deposits accumulate to a certain extent, they absorb combustion heat and may even cause detonation or knocking. If the fuel injectors become clogged, it can lead to poor atomization of fuel, resulting in fuel dripping and smoke, which not only increases fuel consumption but also pollutes the environment. 2. Ignition system issues: This is usually caused by excessive carbon buildup on the spark plugs or insufficient ignition voltage, leading to misfiring. It may even result in single or multiple cylinder misfires, causing insufficient engine power and resulting in shaking. Severe shaking can put the engine in a state between stalling and firing.
13
1
Share

How to Replace the Civic's Cabin Air Filter?

Here are the detailed steps for replacing the Civic's cabin air filter: 1. Open the glove box. 2. Press the side panels to release the two retaining tabs. 3. Rotate the glove box outward. 4. Press the tabs on the corners of the filter housing to remove it. 5. Take out the old filter from the housing. 6. Install the new filter into the housing. Additional information about cabin air filters: 1. A filter is essential for purifying external air before it enters the vehicle cabin. Without this filtration, the interior air can easily become contaminated. 2. Occupants may inhale significant amounts of particulate matter and harmful gases, leading to lung irritation and infections. 3. Inhaled contaminants can accelerate wear on HVAC system components such as the blower motor and evaporator core.
17
4
Share

Does modifying the front grille affect annual inspection?

Replacing the front grille before a new vehicle is registered does not affect the annual inspection. However, if the front grille is replaced after the new vehicle is registered, it is necessary to go to the vehicle management office for re-registration and update the vehicle license. Otherwise, it will affect the annual inspection. The following are situations where modification registration is not permitted: 1. Brand and model: Changing the brand, model, and engine model of the vehicle, except for engines that are permitted to be selected by the competent department of motor vehicle products under the State Council. 2. Appearance and technical data: Changing the registered appearance and technical data of the vehicle, unless otherwise stipulated by laws, regulations, and national mandatory standards. 3. Small modifications: No registration is required for decorative items such as rearview mirrors, small stickers, and small spoilers. However, registration is mandatory for color changes, wheel replacements, or full body kits.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.