What to Do If the Folding Rearview Mirror Squeaks?

1 Answers
MaryLynn
07/29/25 11:26am
Folding rearview mirror squeaking may be caused by a lack of lubricating oil. The folding rearview mirror function refers to the ability of the rearview mirrors on both sides of the car to fold and retract when necessary, which can be either manual or electric. If the folding rearview mirror squeaks, you can remove the mirror, clean the rotating parts, dry them with compressed air, and finally apply grease. Below is an introduction to the functions of the folding rearview mirror: 1. During driving, accidents are inevitable. As the widest component installed on the vehicle, the rearview mirror is most susceptible to impact in the event of a collision. To minimize scratches, the rearview mirror needs to have a folding function. 2. A rearview mirror with a folding function can be retracted when passing through narrow sections, improving the vehicle's passability. When the driver leaves the car, the rearview mirror can also be folded, not only protecting the mirror surface but also reducing parking space, effectively avoiding scratches.
Was this review help?
11
1
Share
More Forum Discussions

What is the classification for a manual transmission driver's license?

Manual transmission driver's license is classified as C1. Additional information is as follows: 1. The vehicle types permitted for C1 license include: small cars; and other vehicle types permitted for C2, C3, and C4 licenses. 2. Driver's license test content: The test subjects include traffic regulations and related knowledge, field driving, road driving, and safety and civilized driving knowledge test, totaling four items. The order of the test subjects is as follows: traffic regulations and related knowledge (referred to as Subject 1), field driving (referred to as Subject 2), road driving (referred to as Subject 3), and safety and civilized driving knowledge test (referred to as Subject 4). During the test process, if a candidate fails a subject, the subsequent subjects will not be conducted. Each subject can be taken once with one retake opportunity, and there are a total of 5 retake opportunities. If a candidate fails after 5 retakes, the current test session is terminated. Within the validity period of the learning driver's license, candidates are allowed to reapply for the test. The maximum number of reapplications allowed is determined by the local traffic management department, and the interval between tests must be no less than 11 days.
16
0
Share

What are the causes of engine vibration after a major overhaul of Chery engines?

Chery engine vibration after a major overhaul can be caused by mechanical faults, as well as poor performance of components such as the throttle body, ignition system, and fuel supply system. Below are the specific reasons and solutions: Ignition system malfunction: Spark plugs, high-voltage wires, and ignition coils may exhibit unstable operation after a certain period of use. Solution: Inspect the condition of spark plugs, high-voltage wires, and ignition coils, and replace the spark plugs if necessary. Aging engine components: When the car's electrical system is turned on while the engine is idling, it increases the engine load, causing idle speed to drop. To compensate for the resulting vibration, the engine may automatically raise the RPM slightly. Solution: Replace the engine mounts.
13
3
Share

What do D1, D2, D3, D4, D5 mean in an automatic transmission?

Automatic transmission D1, D2, D3, D4, D5 are equivalent to three gears. D1 manually locks the car's gear in first gear, overriding the vehicle's automatic control. D2 manually locks the gear in second gear, not exceeding second gear, allowing the car to automatically switch between first and second gears. D3 locks the gear in third gear, allowing the vehicle to automatically shift between first, second, and third gears. More relevant information is as follows: Note 1: D1 and D2 can be used when going uphill. On steep slopes, manually setting the gear to first or second gear is similar to using a manual transmission on a steep slope. Utilizing lower gears achieves greater torque, making it easier to climb. Locking the gear has the added benefit of preventing frequent gear shifts in D mode. Note 2: The advantage of D3 is faster response when overtaking. At a speed of 80 km/h, the gear is usually in 5th or 6th gear. If you want to overtake quickly, the automatic transmission will gradually downshift from 6th to 5th, then to 4th, and finally to 3rd, which takes time. However, directly shifting to D3 immediately changes to 3rd gear, providing the fastest response. This enables instant acceleration, and after overtaking, you can shift back to D mode.
6
5
Share

What is the fuel consumption per 100 kilometers for the Haval H7 2.0T?

The fuel consumption per 100 kilometers for the Haval H7 2.0T is 7.7L, which is the official data. The fuel tank capacity of the Haval H7 2.0T is 65L. When the tank is full, the distance it can travel is 65/7.7*100=844km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
14
0
Share

Can I directly apply for an A2 driver's license now?

Currently, you cannot directly apply for an A2 driver's license. The A2 license cannot be obtained as an initial application; it must be acquired through an upgrade. The driver must have held a B1 or B2 driver's license for at least three years, and in the two most recent scoring cycles before applying for the A2 license, they must not have accumulated 12 penalty points. Alternatively, if the driver has held an A1 license for at least one year, they must not have accumulated 12 penalty points in the most recent scoring cycle before applying for the A2 license. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" and the "Measures to Facilitate Services for the Public," the conditions for applying for an A2 license are as follows: Age must be between 22 and 60 years old; Height must be at least 155 cm, with both thumbs intact, at least three functional fingers on each hand, and normal hand mobility; No red-green color blindness, with uncorrected or corrected visual acuity of at least 5.0; Normal body and neck mobility, with intact lower limbs and a leg length difference not exceeding 5 cm; Must have held a B1 or B2 license for at least two years and not accumulated 12 penalty points in the two most recent scoring cycles.
9
0
Share

Which Types of Car Insurance Should You Buy in 2021?

Vehicle insurance is divided into two major categories: compulsory insurance and commercial insurance. There are four types of insurance that must be purchased (compulsory insurance, third-party liability insurance, vehicle damage insurance, and no-deductible insurance). The specific details are as follows: 1. Compulsory Insurance, also known as Traffic Accident Liability Compulsory Insurance: This is a type of insurance mandated by the state, and vehicles cannot be driven on the road without it. New cars cannot be registered without compulsory insurance. When a vehicle undergoes an annual inspection, a copy of the compulsory insurance policy must also be submitted. In the event of an accident, compulsory insurance is required to compensate third-party victims. According to regulations, compulsory insurance has corresponding compensation limits: 110,000 yuan for death or disability, 10,000 yuan for medical expenses, and 2,000 yuan for property damage. These are the maximum compensation limits for compulsory insurance. 2. Third-Party Liability Insurance: The coverage amount of third-party liability insurance varies depending on the insured amount. It is recommended to purchase at least 1 million or 2 million yuan in coverage to ensure that no additional costs are incurred when the vehicle is fully responsible for a traffic accident. 3. Vehicle Damage Insurance: This insurance protects the vehicle itself. Whether it is a two-party or single-party traffic accident, the insurance company will provide free repairs to the responsible party within the specified coverage limit. 4. No-Deductible Insurance: After purchasing vehicle damage insurance and third-party liability insurance, the insurance company will not compensate 100% of the loss amount in the event of a claim. However, if no-deductible insurance is purchased, 100% of the actual repair and loss costs will be compensated.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.