What to Do If the Edge's Trunk Won't Open?

1 Answers
LaSerenity
07/29/25 4:28pm
If the electric trunk of the Edge won't open, first check whether the related circuits, fuses, contacts, etc., are functioning properly and if any product configurations are damaged. Issues such as product accessories and wiring require confirmation and repair at a professional maintenance shop. If the issue is not a fault, and it's an intermittent malfunction caused by improper operation, you can try manually opening the tailgate, then manually closing it to initialize the system to see if it can open normally. Below are the reasons why the Edge's electric trunk may not open: Tailgate won't open: Improper operation may cause the tailgate not to open. For example, some electric tailgates may require shifting to P gear, turning off the engine, and unlocking the doors to open the tailgate. Some may not respond if the button is pressed for too long, potentially causing button failure or entering a memory learning state. Control box issue: Problems with the control box, which is the "computer" control center of the electric tailgate, may prevent it from receiving the switch command, resulting in the electric tailgate not opening. Connection failure in wiring: Faults in power lines, control lines, adapter lines, etc., can lead to connection failures, causing the tailgate to lose power and signal, thus not opening.
Was this review help?
10
4
Share
More Forum Discussions

How many times can you retake Subject 2?

Subject 2 can be retaken up to 5 times. If you fail the 5th retake, all previously passed subjects will be invalidated. To continue the driver's license examination, you will need to re-register starting from Subject 1. Subject 2 is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. For small vehicles (C1, C2), the test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. For large vehicles (A1, A2, A3, B1, B2), the test items include: pole test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, curve driving, right-angle turns, passing a width-restricted gate, passing continuous obstacles, driving on bumpy roads, U-turns on narrow roads, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy/foggy conditions, slippery roads, and emergency handling.
3
5
Share

How to Replace the Reading Light in the 10th Generation Civic?

Replacement of the reading light in the 10th Generation Civic requires professional service at a repair shop or 4S dealership. The reading light provides sufficient brightness for passengers when interior lighting is inadequate, facilitating in-car reading without affecting the driver's normal operation. Dimensions of the 10th Generation Civic are: length 4649mm, width 1800mm, height 1416mm, with a wheelbase of 2700mm and a fuel tank capacity of 47 liters. The vehicle is equipped with a 1.0T turbocharged engine delivering maximum power of 92kW and peak torque of 173Nm, paired with a 6-speed manual transmission.
1
3
Share

Which gear should be used for climbing hills in a semi-automatic transmission car?

For climbing hills in a semi-automatic transmission car, the S gear (Sport mode) is suitable. Here's an introduction to the gears in a semi-automatic transmission car: 1. P stands for Parking gear, used when the vehicle is parked for an extended period and should be used in conjunction with the handbrake; 2. R stands for Reverse gear, used when reversing the vehicle; 3. D is the Drive gear, also known as the forward driving gear; 4. S is the Sport gear; 5. D plus or minus refers to the manual mode, allowing manual gear shifting - push up to shift to a higher gear and pull down to shift to a lower gear. A semi-automatic transmission combines manual and automatic transmissions, aiming to enhance the fuel efficiency and control of the automatic transmission by giving the driver control over gear shifting, which is typically decided by the computer.
18
5
Share

What are the symptoms of an automatic transmission failure?

Symptoms of an automatic transmission failure include: 1. The gear shifting speed cannot keep up with the acceleration speed when the driver steps on the gas pedal; 2. When the driver releases the gas pedal or steps on the brake pedal, the engine speed and clutch plate speed become unsynchronized; 3. Poor heat dissipation in the transmission. Methods for maintaining an automatic transmission are: 1. Follow the manufacturer's requirements, conduct regular inspections, and replace the specified transmission oil on time; 2. Only about 30% of the total oil can be drained through the oil drain bolt, and transmission cleaners should not be used; 3. For a complete transmission oil change, use a transmission cleaner in conjunction with a transmission oil exchanger.
4
3
Share

How to Replace the Battery in a Ford Focus Key Fob?

Ford Focus key fob battery replacement method is: 1. Use a screwdriver or other sharp tool to press down on the latch at the side groove of the key fob to open the cover; 2. Remove the cover, take out the old battery, replace it with a new one, and then close the cover. The Ford Focus has a body size of: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, and a fuel tank capacity of 53 liters. The Ford Focus is equipped with a 1.5L naturally aspirated engine, with a maximum power of 90kW at 6500 rpm, maximum torque of 153Nm at 4500 rpm, and is paired with a 6-speed manual transmission.
8
2
Share

Why is the car air conditioning not heating properly?

The reasons why the car air conditioning is not heating properly are: 1. Clogged heater core; 2. Blocked air filter; 3. Aging air conditioning motor. The correct way to use car air conditioning for heating is: 1. Turn on the heater 8 to 15 minutes after starting the car; 2. First use the external circulation to expel the cold air inside the car, then switch to internal circulation after 2 to 3 minutes; 3. Switch to heating mode; 4. Adjust the air conditioning to the appropriate level and adjust the air outlet direction; 5. Direct the warm air flow forward and towards the feet. Car air conditioning is a device that cools, heats, ventilates, and purifies the air inside the vehicle. Its functions are: to provide a comfortable environment for passengers, reduce driver fatigue, and improve driving safety.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.