What to Do If the Duplicate Copy of the Driver's License Is Lost?

1 Answers
EmeryLee
07/25/25 4:56pm
Measures to address the loss of the duplicate copy of the driver's license: If the duplicate copy of the driver's license is lost, it is necessary to promptly apply for a replacement at the vehicle management office. Both the original and duplicate copies of the motor vehicle driver's license are indispensable components. The original copy records the basic information of the vehicle, while the duplicate copy records the inspection status of the vehicle. To apply for a replacement at the vehicle management office, the driver needs to prepare the following relevant supporting materials: 1. Recent 1-inch bareheaded photo of the driver (white background); 2. The original and a copy of the driver's ID card; 3. Fill in the loss statement in the blank space of the ID card copy and add a signature and date; 4. At the same time, a written statement of loss of the motor vehicle driver's license needs to be filled out. The main purpose of filling out the written statement is to prove the loss of the duplicate copy of the driver's license.
Was this review help?
14
1
Share
More Forum Discussions

What is the most feared substance entering an engine?

The most feared are granular impurities, as they can render the engine ineffective. Specific details are as follows: 1. Automotive engine: It is the device that provides power for a car, serving as the heart of the vehicle, determining its power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, automotive engines can be classified into diesel engines, gasoline engines, electric vehicle motors, and hybrids, among others. 2. Working principle: A four-stroke gasoline engine mixes air and gasoline in a certain proportion to form a good combustible mixture, which is drawn into the cylinder during the intake stroke. The mixture is compressed, ignited, and burned to generate thermal energy. The high-temperature and high-pressure gas acts on the top of the piston, pushing it to perform reciprocating linear motion, thereby outputting mechanical energy externally through the connecting rod and crankshaft flywheel mechanism. A four-stroke gasoline engine completes one working cycle during the intake stroke, compression stroke, power stroke, and exhaust stroke.
15
5
Share

What are the functions of the buttons in the 2010 Audi model?

2010 Audi Button Usage Guide: (1) Center Console Buttons: 1. drive-select (driving mode selection); 2. Electronic Stability Program (ESP); 3. Hazard warning lights (commonly known as double flashing lights); 4. Volume adjustment buttons; 5. Parking radar/image; 6. Driving assistance system; 7. Auto hold. (2) Door Buttons: 1. Rear door child lock switch; 2. One-touch up/down control switches for all four door windows; 3. External rearview mirror adjustment switches (angle, folding, heating function); 4. The trunk lid switch is located below the door handle; 5. Rear sunshade switch; 6. Front sunroof switch; 7. Rear windshield sunshade switch; 8. One-touch up/down control for window glass. (3) Roof Buttons: 1. Emergency call; 2. Interior lighting; 3. Rear sunshade switch; 4. Sunroof switch; 5. Welcome light; 6. Connected rescue.
9
0
Share

What is the model of the low beam bulb for Haval H6?

Haval H6 low beam bulb model is H7/55W, with the base version equipped with halogen headlights, and the mid-to-high trim models featuring LED headlights. The differences between halogen and LED headlights are as follows: 1. Halogen Headlights: Halogen headlights are essentially an upgraded version of incandescent bulbs. By adding halogen gas, they solve the problems of short lifespan and blackening associated with incandescent bulbs. The advantages of halogen lights include low cost, ease of production, and stronger penetration compared to xenon and LED lights due to their yellow light. However, the drawbacks are lower brightness and relatively shorter lifespan. 2. LED Headlights: The light emission principles of halogen and xenon headlights both involve converting electrical energy into thermal energy, which is then transformed into light energy. In contrast, LED headlights directly convert electrical energy into light energy through LED chips, skipping the thermal conversion step. Therefore, LED headlights are also known as cold light sources, with operating temperatures typically ranging between 50 to 70 degrees Celsius. In terms of brightness, LED headlights are comparable to new xenon lights, providing ample brightness. Additionally, they are energy-efficient, stable in performance, and start instantly without delay. LED headlights can also be shaped into stylish forms, making them very aesthetically pleasing. Due to their high brightness, energy efficiency, stability, and long lifespan, LED headlights are becoming increasingly popular.
14
5
Share

Where is the brake light switch located on the Haval H6?

The brake light switch on the Haval H6 is located beneath the brake pedal. Brake lights are generally installed at the rear of the vehicle, featuring red-colored lenses to enhance light penetration. This ensures that following vehicles can easily detect when the vehicle ahead is braking, even under low visibility conditions, thereby helping to prevent rear-end collisions. Below is a classification of automotive lights: 1. Headlights: Combined headlights are located at the front of the vehicle, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. 2. Taillights: Combined taillights are located at the rear of the vehicle, mainly serving illumination and signaling functions. 3. Turn signals: These lights indicate to other road users when the vehicle is turning left or right. Regulations require them to be amber in color. 4. License plate lights: License plate lights primarily illuminate the vehicle's license plate, allowing people to identify the vehicle's registration number at night.
1
4
Share

How much will insurance pay if the car is flooded in a flood?

The compensation will be based on whether the policy was purchased before or after the auto insurance reform. Below is a partial introduction to auto insurance: 1. Components: Auto insurance generally consists of two parts: basic insurance and additional insurance. Basic insurance is further divided into vehicle damage insurance and third-party liability insurance. 2. Coverage: Vehicle damage insurance covers the loss of your own vehicle; third-party liability insurance covers damages to targets outside your own vehicle, such as people hit, public property, and the other party's car; passenger liability insurance covers personal and property losses within your own vehicle; theft insurance covers the loss of your own vehicle when it is stolen; no-deductible coverage ensures 100% compensation in case of an accident. If no-deductible coverage is not purchased, you will bear 30% of the deductible for each accident.
7
2
Share

Why is the clutch of Shandeka so heavy?

When you feel that the clutch pedal is very heavy to press, the problem is usually related to the release bearing. After prolonged use, severe wear and lack of lubrication can cause excessive resistance. Issues with the pressure plate, clutch cover, or release bearing, commonly referred to as the "clutch three-piece set," can also lead to a heavy clutch. These components are wear parts, and if they are faulty or severely worn, the clutch may become too heavy. Here is some additional information: Notes: During driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. The clutch is a common component in mechanical transmissions, allowing the drivetrain to be disconnected or engaged at any time.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.