What to Do If the Driver's License Review is Overdue?

2 Answers
SarahLynn
07/24/25 7:23am
As long as the expiration does not exceed one year, the annual review can be conducted normally; if it exceeds one year or more, the vehicle management office should cancel the driver's license. Here are the relevant details: 1. Driver's License Annual Review: Starting from May 1, 2012 (International Labor Day), the annual review for drivers of large buses, medium buses, large trucks (A1, A2, B1, B2), and school bus staff has been changed from once every two years to once every year. The initial issuance date is indicated on the driver's license, and submitting a medical examination form does not incur any fees at the vehicle management office. 2. Important Notes: Drivers holding licenses for vehicle types A, B, N, P, drivers with a C license engaged in commercial transportation, and drivers over 60 years old must undergo an annual review once a year.
Was this review help?
1
0
Share
DelIsabella
08/11/25 3:06am
I just went through an overdue driver's license review and realized this matter can't be delayed. Remembered rushing to the DMV the day I discovered the expiration, bringing my ID card, original driver's license, and medical examination certificate. The staff told me there's no additional penalty within 30 days of overdue, but exceeding that would incur fines and affect credit scores. What's more troublesome is that driving during the overdue period counts as unlicensed driving if caught, and insurance won't cover claims. They had me complete the review on-site, just spending an extra half-hour on a safety education class. Later, I set a reminder on my phone and never dare to be careless again, since traffic point deductions are very real consequences.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

How many liters of engine oil does the new Accord need?

The new Accord requires approximately 4.5 liters of engine oil for an oil change. Below are the specific oil quantity and key points for the new Accord's oil change: Specific oil quantity for the new Accord's oil change: For the exact quantity, check the dipstick after filling. To inspect the engine oil, start the vehicle after adding oil and check it 3 minutes after the engine stops. Since the oil filter needs to be replaced simultaneously, the new oil filter initially contains no oil. After starting the vehicle, oil will flow into the oil filter. Wait 3 minutes after turning off the engine to allow the oil to settle in the oil pan. This ensures a more accurate oil level check. Avoid checking the oil level on a slope, as the tilted oil pan will give an inaccurate reading. The extracted dipstick must be observed perpendicular to the ground. Excessive oil can interfere with the normal operation of the crankshaft and also increase vehicle fuel consumption. Key points: When the crankshaft journal reaches the bottom dead center, contact with the oil creates resistance, affecting normal operation, which is unacceptable. Insufficient oil for circulation and lubrication is also problematic, as it accelerates wear on internal engine components and can lead to engine damage.
4
4
Share

What Causes BMW Turn Signals Not to Work?

BMW turn signals may not work due to a damaged flasher relay or a blown turn signal fuse. Below are the explanation of BMW turn signals and methods to diagnose non-functioning turn signals: Explanation of BMW Turn Signals: Turn signals are important indicator lights that activate when a motor vehicle is turning to alert surrounding vehicles and pedestrians. Methods to Diagnose Non-Functioning Turn Signals: First, check if there is power at the hot wire terminal of the flasher relay. If there is no power, inspect for any breaks in the wire leading to the power source. If there is power, use a screwdriver to bridge the two terminals of the flasher relay. If the turn signals light up, it indicates a faulty flasher relay that should be replaced promptly. If the turn signals still do not work, the issue may lie with the turn signal switch. Use a screwdriver to separately connect the hot wire of the turn signal switch to the left and right light wire terminals. If the lights turn on, the turn signal switch is faulty and should be removed for repair or replacement.
1
1
Share

What Does Bluetooth Key Mean?

Bluetooth key refers to a feature that allows vehicle control via smartphone Bluetooth when in close proximity to the vehicle. It includes operations such as [lock/unlock] doors, [open/close] trunk, and other related functions, essentially replacing the main functions of a physical key for more convenient vehicle control. More details are as follows: 1. Bluetooth key is an invisible smart key: It possesses all the functions of a physical key and even additional ones. These include unlocking, locking, vehicle locating, starting the vehicle, etc. 2. Internet of Vehicles functionality: All these features are available with just a smartphone, not only reducing the number of items to carry when going out but also enabling richer Internet of Vehicles functions. For example, remotely lending the car to a friend when you're not present or using a virtual key to start the vehicle freely.
12
2
Share

What Causes a Car Air Conditioner Fuse to Keep Blowing?

If the fuse keeps blowing, it may indicate an abnormal circuit condition, and it is recommended to contact the nearest service station for inspection promptly. In a car's electrical system, numerous electrical devices are connected by wires of different colors, among which the fuse is the most critical component not to be overlooked. The reasons for a car fuse blowing are as follows: 1. Improper sealing of the fuse box: When cleaning the engine compartment, due to improper sealing of the fuse box, remember never to rinse the fuse box directly with water, as this can easily cause a short circuit in the fuse, leading to malfunction of the entire vehicle's electrical components. Most fuse boxes have a prominent sign prohibiting water rinsing. 2. Excessive power supply: When replacing headlights, an excessive power supply can easily blow the fuse. In such cases, immediately replace the fuse with one of higher current rating and the power cable to prevent excessive current and overheating. 3. High-power audio systems: These may also cause the fuse to blow. When installing high-power electrical devices, always pay attention to the current level and promptly replace the corresponding fuse. Most reputable modification shops are aware of this issue.
6
5
Share

What is the function of changing spark plugs in a car?

Spark plugs, as the terminal components of the engine ignition system, play a crucial role. If spark plugs are fouled or worn short, it can affect normal operation, leading to weak car starts, incomplete combustion of cylinder fuel, increased fuel consumption, poor performance, and poor acceleration. More detailed information is as follows: 1. The electrode of the spark plug: The electrode of the spark plug repeatedly and continuously generates sparks to ignite the air-fuel mixture in the cylinder. Meanwhile, other parts of the ignition system produce timed high-voltage electrical pulses, forming sparks and generating explosions to provide the energy required for engine power output. 2. The structure of the spark plug: It is made by passing a slender metal electrode through a ceramic material with insulating properties. The lower part of the insulator is surrounded by a metal shell, which is screwed onto the cylinder head with threads. At the bottom of this metal shell, an electrode is welded to form a grounding connection with the car body. Additionally, at the central end of this electrode, there must be a small discharge gap. Then, high-voltage current from the distributor passes through this central electrode, discharging at the bottom gap. At this point, the spark plug functions to generate sparks and ignite the air-fuel mixture, providing the engine with energy and power output.
19
3
Share

What is the relationship between car power, horsepower, and torque?

Power is directly proportional to torque, and power can be converted to horsepower. In fact, power and horsepower represent the same concept. 1 horsepower is approximately equal to 0.735 kW. Power is an important performance parameter of an engine, used to measure how much work the engine can perform per unit of time. Engines with higher power have stronger performance but also higher fuel consumption. More detailed explanations are as follows: 1. The power of an engine is related to its speed and torque: Torque is another crucial performance parameter of an engine, measuring the amount of rotational force the engine can output in a single work cycle. The higher the speed, the more work cycles the engine completes per unit of time, and the greater the torque, the more rotational force the engine can output in each cycle. Therefore, power is directly proportional to both speed and torque. 2. Turbocharging technology: If you want to increase engine power, another simple method is to use turbocharging technology. Turbocharging can increase the engine's air intake without enlarging the engine's displacement. 3. Engines use a mixture of air and fuel as their energy source: Increasing the air intake and fuel injection means more fuel in the cylinders. With more fuel, each combustion cycle releases more energy, thereby enhancing the engine's power. Many small-displacement engines utilize turbocharging technology.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.