What to Do If the Driver's License Expires Without Renewal?

How to Replace the Remote Battery for Trumpchi GS4?

To replace the remote battery for Trumpchi GS4, follow these steps: Use a small flat-head screwdriver to pry open the remote shell, then you can see the battery. Remove the old battery and replace it with a new one. The dimensions of the Trumpchi GS4 are 4545mm in length, 1856mm in width, and 1668mm in height, with a wheelbase of 2680mm and a fuel tank capacity of 55 liters. The Trumpchi GS4 is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 124 kW at 5000 rpm and a maximum torque of 265 N·m between 1700 to 4000 rpm.

5

3

Share

What is the Lynk & Co brand?

Lynk & Co is a premium brand jointly established by Geely Holding Group, Geely Auto Group, and Volvo Cars in the new era. The Lynk & Co brand includes models such as the Lynk & Co 06, Lynk & Co 06 New Energy, Lynk & Co 02, Lynk & Co 02 New Energy, and Lynk & Co 01. Taking the Lynk & Co 06 as an example: this car has a length, width, and height of 4340mm, 1820mm, and 1625mm respectively, with a wheelbase of 2640mm. The car is equipped with a 1.5T L3 engine, classified as a compact SUV, with a turbocharged intake system, delivering a maximum horsepower of 177ps and a maximum torque of 255nm. It is a 5-door, 5-seat SUV with a 7-speed dual-clutch transmission.

3

Share

What to Bring for a Car's First Maintenance?

Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's registration certificate; vehicle's purchase invoice, to be taken to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S store in advance. The first maintenance refers to the initial service after a new car has been driven, with the specific timing varying by vehicle, typically after driving 1,000 to 3,000 kilometers. It's crucial to attend the first maintenance promptly, neither too early nor too late. The completion of the first maintenance signifies the end of the car's break-in period, allowing the vehicle to be driven under standard load and normal speed as required. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance timing: mileage and time. Whichever comes first serves as the standard. First maintenance tasks include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and examining tires for damage or bulges. Estimated time required: Approximately 2 hours to complete all tasks. The most critical aspect of a new car's first maintenance is changing the engine oil and oil filter. When changing the oil, the oil filter must also be replaced simultaneously. The selection of engine oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It's important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, they can be cleaned with a vacuum cleaner or removed, scrubbed with a brush and detergent, dried, and then placed back. There are many drainage holes under the rubber mats on the floor of the driver's compartment. If water enters, it won't dry naturally but will flow through these holes to areas like the transmission, causing erosion and corrosion. The best practice is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the car's antifreeze is low, it's recommended to drain the antifreeze and add the same brand from the start. Since antifreeze brands differ, their chemical properties vary significantly. Various functional additives can corrode those from other brands. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function properly again. Some people apply lubricant to the bolts and nuts to prevent rust, but this introduces unnecessary risks to safe driving. At high speeds, bolts and nuts can easily loosen or even fall out, leading to driving failures. Do not press the accelerator when starting an EFI car: The starter of an EFI (Electronic Fuel Injection) car differs from that of a conventional car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

6

4

Share

What causes engine shaking in an Audi A6?

Audi A6 engine shaking is caused by severe carbon buildup, which can be resolved by cleaning the carbon deposits. The Audi A6 is a mid-to-large-sized 5-door, 5-seat station wagon with dimensions of 4951mm in length, 1886mm in width, and 1483mm in height, and a wheelbase of 2925mm. It has a fuel tank capacity of 73 liters. The Audi A6 is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 140 kW and a maximum torque of 320 Nm. It features front-wheel drive, with both front and rear suspensions using a five-link independent suspension system. The steering assistance type is electric power steering, and the body structure is a unibody design.

7

5

Share

What is the standard tire pressure?

Standard tire pressure ranges between 2.3 and 2.5 bar. Tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a crucial role in a vehicle's performance and power. Tires are rolling objects installed on various vehicles or machinery that come into contact with the ground. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing capacity, traction performance, and cushioning performance. Tires can be categorized by their intended use into: passenger car tires, light truck tires, construction machinery tires, off-road vehicle tires, agricultural and forestry machinery tires, industrial vehicle tires, motorcycle tires, aviation tires, and special vehicle tires.

13

0

Share

What type of gasoline does the Volkswagen T-Roc use?

Volkswagen T-Roc uses 95 octane gasoline. 95 octane gasoline consists of 95% isooctane and 3% n-heptane. High compression ratio engines should use high-octane gasoline. If low-octane gasoline is used in a high compression ratio engine, it may cause abnormal combustion, resulting in knocking, increased fuel consumption, and reduced driving power. The Volkswagen T-Roc has dimensions of 4318mm in length, 1819mm in width, and 1582mm in height, with a wheelbase of 2680mm. It is a 5-door, 5-seater SUV, equipped with a 7-speed dual-clutch transmission and a 1.4T L4 engine. The intake form is turbocharged, with a maximum horsepower of 150ps and a maximum torque of 250nm.

14

2

Share

What to Do If the Driver's License Expires Without Renewal?

How to Replace the Remote Battery for Trumpchi GS4?

What is the Lynk & Co brand?

What to Bring for a Car's First Maintenance?

What causes engine shaking in an Audi A6?

What is the standard tire pressure?

What type of gasoline does the Volkswagen T-Roc use?

Which company owns the MINI car brand?

How many seconds does the Tesla Model X take to accelerate from 0 to 100 km/h?

What do 'E' and 'F' on the fuel gauge mean?

When to Use L Gear in an Automatic Transmission?