What to do if the compulsory traffic insurance for motorcycles has been interrupted for one year?

1 Answers
VivienneLynn
07/29/25 11:52pm
If the compulsory traffic insurance for motorcycles has been interrupted for one year, there is no need to make up the payment. You can directly purchase insurance at the basic rate, and the coverage will take effect the next day. The insurance company will compensate for personal injuries, deaths, and property losses caused by road traffic accidents involving the insured motor vehicle within the liability limits.
Was this review help?
12
2
Share
More Forum Discussions

What to Do When the Motorcycle Key Won't Turn

There are several possible reasons why a motorcycle key won't turn: 1. Check if the key is original: Using a non-original key may prevent it from turning. 2. Inspect the key for damage or deformation: If the key has been subjected to external force causing it to bend or break, it won't turn when inserted. 3. Visit a repair shop: If the above issues aren't present, have a professional check the lock cylinder's condition. Emergency methods for lost keys: 1. DC ignition system: Open the handlebar cover and look below the ignition switch to find a black wire and a red wire. Connect these two wires with a large pin to start the vehicle. 2. AC ignition system: Open the handlebar cover and look below the ignition switch to locate a black-and-white wire. Temporarily cutting this wire will allow the vehicle to start.
8
3
Share

Do you need to wait for the red light in the left-turn lane?

You need to wait for the red light when turning left. When the red light is on, vehicles are prohibited from passing, and you cannot make a U-turn or left turn directly. Regulatory basis: The "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" has corresponding provisions: Article 38 states that motor vehicle signal lights and non-motor vehicle signal lights indicate: When the green light is on, vehicles are allowed to pass, but turning vehicles must not hinder the passage of released straight-going vehicles and pedestrians. When the yellow light is on: Vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle signal lights or pedestrian crossing signal lights, non-motor vehicles and pedestrians shall follow the instructions of the motor vehicle signal lights.
12
2
Share

How much is the starting current of an engine starter?

When a gasoline engine starts, the battery output current can reach 200 to 600 amps, while for a diesel engine, it can reach up to 1000 amps. Introduction to starting current: The starting current (CCA) index refers to the minimum current obtainable under specific conditions at -17.8°C and -28.9°C. This index links the starting capability of the battery with important variables such as engine displacement, compression ratio, temperature, starting time, the technical state of the engine and electrical system, and the minimum operating voltage for starting and ignition. Starting current vs. operating current: Generally, the starting current is 20 times the operating current. This occurs when the battery is weak or not fully charged, or possibly when the under-voltage indicator is damaged. It is recommended to test the battery voltage after 25 kilometers. For a 48V battery, a reading around 50V is considered normal.
2
1
Share

What kind of oil should be used in a continuously variable transmission?

Continuously variable transmissions require gear oil, and it is recommended to use gear oil with a viscosity below 150, preferably on the lower side. The specific choice depends on the model of the machine and the working environment. Introduction to Continuously Variable Transmission: A continuously variable transmission (CVT) is a type of automatic transmission in vehicles that can continuously obtain any transmission ratio within its range. It allows for optimal matching between the transmission system and the engine's operating conditions. Common types of CVTs include hydro-mechanical continuously variable transmissions, metal belt-type continuously variable transmissions (VDT-CVT), and variable-angle continuously variable transmissions. Difference between CVT and Automatic Transmission: The main difference between a CVT and a conventional automatic transmission is that the CVT eliminates the complex and bulky gear combination for transmission, instead using only two sets of pulleys for variable transmission. By changing the contact radius of the drive belt between the driving and driven pulleys, the CVT achieves variable transmission, showcasing a very ingenious design concept.
20
2
Share

What are the reasons for the Hyundai Elantra's one-button start not working?

Specific reasons for a one-button start car not starting: 1. Steering wheel lock: The steering wheel lock is an anti-theft feature. When the car is turned off, turning the steering wheel from the centered position in one direction by a certain angle will lock the steering wheel. In the locked state, the one-button start function will not work. You need to turn the steering wheel left and right while pressing the engine start button to release the tension and unlock the steering wheel. 2. Smart key battery dead: When the vehicle's smart key battery is dead, the key's transmission power is low, making it difficult for the car's sensors to detect it. In this case, the one-button start cannot complete the ignition.
7
1
Share

How to Use an Air Conditioning Pressure Gauge?

Usage of the air conditioning pressure gauge is as follows: 1. Gauge classification: Generally, an air conditioning pressure gauge has 2 dials, the red one is the high-pressure gauge, and the blue one is the low-pressure gauge (with different ranges and accuracies). 2. Usage method: When connecting the high and low-pressure hoses to the air conditioning pipeline (charging valve) via quick-connect fittings, tighten the end cap of the quick-connect fitting to allow the push rod to open the charging valve core, connecting the system and the pressure gauge. At this point, the system pressure values can be read on the high and low-pressure gauges. 3. Low-pressure gauge: The normal pressure range in the air conditioning system is -0.1MPa to 1.5MPa. 4. High-pressure gauge: The normal pressure range in the air conditioning system is -0.1MPa to 4.0MPa.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.