What to Do If the Car Won't Start After Being Parked for a Month?

What kind of engine oil does the LaCrosse use?

The LaCrosse uses engine oil with a viscosity grade of SAE5W30. In extremely cold regions where temperatures drop below -29°C, SAE0W30 oil can be used. This viscosity grade makes cold starts easier for the engine in extremely low temperatures. If the engine oil filler cap has a dexos logo, it is recommended to use engine oil with dexos certification. The LaCrosse is a mid-to-high-end sedan produced and sold by Buick, equipped with General Motors' 1.5T SIDI direct-injection turbocharged engine paired with a 9-speed HYDRAMATIC intelligent transmission for efficient driving. The vehicle dimensions are 5026mm in length, 1866mm in width, and 1459mm in height, with a wheelbase of 2905mm.

6

1

Share

How to reset the tire pressure indicator light on the Octavia?

Method to reset the Octavia's tire pressure indicator light: First, ensure that all four tires have normal pressure. With the tire pressure at the correct level, turn on the ignition and press and hold the tire pressure monitoring switch until you hear an alarm sound, then release to reset the tire pressure indicator light. The Octavia is a vehicle launched by SAIC Volkswagen, with dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, and a wheelbase of 2686mm. In terms of exterior design, this car adopts Škoda's new family design language, showcasing a minimalist style, and the two-tone floating exterior rearview mirrors add a sense of layering to the body. For the suspension, the front uses a MacPherson independent suspension, while the rear employs a torsion beam non-independent suspension.

17

4

Share

Where is the fuel tank switch of the Excelle located?

Excelle fuel tank switch is located on the left side of the driver's seat. The following is the relevant content: Excelle fuel tank switch: The fuel tank switch of the Excelle is located on the left side of the driver's seat. Pull up the fuel filler door switch to release the handle and open the fuel filler door. The fuel tank switch lock is integrated with the car door lock. When you lock the car doors, the fuel tank cap is also locked. When you unlock the car doors with the key, the fuel tank lock is released, allowing you to directly open the fuel tank cap. Introduction to the Excelle: The Excelle is a compact sedan produced by SAIC-GM Buick. It is equipped with a 1.3T 48V mild hybrid engine and a 1.5L DVVT four-cylinder engine, comprehensively balancing power, fuel consumption, and a good driving experience. The diverse options cater to the needs of different consumers, providing owners with an efficient and agile power experience.

14

3

Share

Why does the Boyue shake when starting cold?

The reasons for the Boyue shaking when starting cold include low temperature, inaccurate air-fuel mixture ratio, severe carbon deposits, and ignition coil failure. Taking the inaccurate air-fuel mixture ratio as an example: it exists in both open-loop and closed-loop control. If the car's computer makes a judgment error, its control over the air-fuel mixture and ignition timing through the actuators will be inaccurate, thereby reducing the car's power output and causing shaking. The Boyue is a model under Geely Auto, with body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. In terms of appearance, the Boyue's front face design follows Geely's family-style "water ripple" grille. Considering the sense of power of an SUV, the designer reduced the number of grids, making the overall look more concise and the edges more distinct.

8

2

Share

How to Determine if the Timing Chain is Stretched?

It is impossible to determine if the timing chain is stretched by yourself, but a 4S dealership can read the crankshaft sensor and camshaft sensor. If there is an alarm indicating operational delay, it may indicate a potential issue with the timing chain stretching. The timing chain works by connecting the sprockets of components such as the crankshaft and camshaft with a high-strength metal chain, ensuring synchronized operation. Due to the high-speed movement between metal parts, wear is rapid and temperatures are high, necessitating the design of an appropriate lubrication system for cooling and lubrication. Additionally, the use of timing chains in engine design also presents the issue of friction noise between metal parts. To address this, manufacturers must take various measures, such as designing optimized chains.

20

5

Share

How to Detect When the Battery is Fully Charged?

Detecting when the battery is fully charged can be determined by the charging time. Typically, a household car battery has a capacity of around 60Ah, and the required charging current is one-tenth of the battery capacity, which is 6A. Charging at this current usually takes about 3 to 5 hours to fully charge the battery. If a lower current is used for charging, it may take around 10 hours to fully charge. A battery, also known as an accumulator, is a type of cell that works by converting chemical energy into electrical energy. It mainly consists of lead and its oxides as electrodes, with a sulfuric acid solution as the electrolyte. Types include lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries.

2

1

Share

What to Do If the Car Won't Start After Being Parked for a Month?

What kind of engine oil does the LaCrosse use?

How to reset the tire pressure indicator light on the Octavia?

Where is the fuel tank switch of the Excelle located?

Why does the Boyue shake when starting cold?

How to Determine if the Timing Chain is Stretched?

How to Detect When the Battery is Fully Charged?

What is the correct way to brake a motorcycle?

Are Car Key Batteries Universal?

How to Clean Carbon Deposits in the Car Throttle Body?

What Causes Car Vibration at High Speeds?