What to Do If the Car Paint Color Doesn't Match the Original?

1 Answers
LeCorbin
07/29/25 5:33pm
If the color discrepancy is noticed immediately during the spraying process, you can stop spraying right away and proceed with relevant treatments such as color rematching and respraying. If the color remains noticeably darker after a month, you can have the 4S shop respray it. However, a full-body respray isn't necessary; transitional spraying techniques can be used instead. Once the car's paint has completely dried, perform body care treatments such as waxing or glaze sealing for proper car body maintenance.
Was this review help?
4
1
Share
More Forum Discussions

What does it mean to have the car title held for three years when buying a car?

When the car title is held for three years, such a vehicle falls under the category of mortgaged car procedures. Below is a related introduction to car mortgages: 1. Definition: A car mortgage loan is a loan obtained from a financial institution or auto consumer finance company using the borrower's or a third party's car or self-purchased vehicle as collateral. The primary purpose of using a car as collateral is for quick capital turnover. 2. Considerations: Most car mortgage loans follow the principle of 'mortgaging the documents but not the car,' meaning that you can obtain the loan by mortgaging the relevant documents of your car to the lending institution, while the car can still be used normally after installing a GPS. Therefore, before proceeding with the mortgage, it's advisable to first understand whether the car mortgage requires the car to be held as collateral, which can help avoid institutions that require the car to be held.
7
1
Share

How to Replace Spark Plugs on a Sail?

The steps to replace spark plugs on a Sail are: 1. Remove the spark plug cap when the engine is cold; 2. Unscrew the old spark plug counterclockwise; 3. Screw in the new spark plug clockwise; 4. Reattach the spark plug cap; 5. After replacing the spark plugs, check for any errors and test start the engine. The Sail is a compact 4-door, 5-seater sedan under the Chevrolet brand. Its body dimensions are: length 4300mm, width 1735mm, height 1504mm, with a wheelbase of 2500mm, a fuel tank capacity of 35 liters, and a trunk capacity of 366 liters. The Sail is equipped with a 1.3L engine, delivering a maximum power of 76 kilowatts at 6000 rpm, and a maximum torque of 127 Newton-meters at 4000 rpm.
8
4
Share

Why Has the Car Steering Wheel Become Heavier?

The reasons why the car steering wheel has become heavier: 1. The power steering fluid is dirty. Generally, after driving for 2 to 3 years, if the steering wheel becomes heavier, the power steering fluid needs to be replaced. 2. Power steering fluid leakage or a decrease in fluid level can also cause the steering to become heavier. 3. If the bearings in the steering system are too tight, the tie rod end is adjusted too tightly, or the steering shaft and sleeve are bent and cause jamming, the steering wheel may become heavier. Therefore, a comprehensive inspection is necessary. The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque and transmit it to the steering shaft. It mainly consists of a frame, foam, and the corresponding mounting clips or screw holes for the driver's airbag (DAB).
20
4
Share

What Causes Car Tire Cracking?

Tire cracking causes: 1. Traumatic cracking: This type of cracking usually occurs irregularly in terms of location, shape, and size, resulting from collisions, compression, or scraping against foreign objects while driving. Some cracks only appear on the rubber surface, while others may damage the tire body cords, with severe cases leading to instant tire deflation. 2. Aging cracks: These cracks typically appear in the later stages of tire use, mostly on the tire shoulder or lower sidewall, and sometimes at the bottom of tread grooves. This phenomenon is a natural change in tire rubber due to long-term flexing and heat generation. Prolonged driving with low tire pressure can accelerate this process, but it generally doesn't affect the tire's service life or safety performance, and usually doesn't require premature replacement.
9
3
Share

How to align the timing belt marks on Peugeot 408?

Peugeot 408 alignment method for timing belt marks: 1. Remove the timing belt; 2. Align the marks on the two large gears at the outer end of the camshaft; 3. There is a mark at the 12 o'clock position, after alignment, locate the scale on the plastic cover at the crankshaft end; 4. Rotate the crankshaft to align it with the zero mark; 5. After the timing is aligned, install the belt. The Peugeot 408 is a compact car under Dongfeng Peugeot. Taking the Peugeot 408 2020 230THP 10th Anniversary Edition as an example, its body dimensions are: length 4750 mm, width 1820 mm, height 1488 mm, wheelbase 2730 mm, and fuel tank capacity 53 liters.
13
4
Share

What engine does the Nissan GT-R use?

The Nissan GT-R is equipped with a VR38DETT 3.8-liter twin-turbocharged V6 engine, delivering a maximum horsepower of 555 hp and a peak power output of 408 kW at 6,800 rpm. It is paired with a 6-speed dual-clutch transmission. The Nissan GT-R is a 2-door, 4-seater hardtop sports car with body dimensions of 4,715 mm in length, 1,895 mm in width, and 1,371 mm in height, featuring a wheelbase of 2,780 mm, a ground clearance of 110 mm, a fuel tank capacity of 74 liters, and a curb weight of 1,785 kg. The Nissan GT-R adopts a front-engine, all-wheel-drive layout, with a double-wishbone independent front suspension and a multi-link independent rear suspension.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.