What to Do If the Car Maintenance Manual Is Lost?

What is the penalty for going straight in a left-turn lane at a three-way intersection?

Going straight in a left-turn lane is considered as not following the lane markings and will result in a fine and a deduction of 3 points. If the straight signal is red, it will be considered as running a red light. According to Article 3 of the 'Scoring Standards for Road Traffic Safety Violations', one of the following violations by a motor vehicle driver will result in a deduction of 3 points: Passenger vehicles: Driving a passenger vehicle (excluding buses) or school bus with passengers exceeding the approved number by less than 20%. Medium-sized vehicles: Driving a medium-sized or larger passenger or cargo vehicle, or a hazardous materials transport vehicle on roads other than highways or urban expressways, or driving other motor vehicles at speeds exceeding the prescribed limit by less than 20%. Weight: Driving a truck with cargo exceeding the approved weight by less than 30%. Driving a motor vehicle on a highway below the prescribed minimum speed limit.

11

0

Share

How to Start Driving Quickly and Smoothly?

Driving smoothly starts with first gear, applying the throttle gently, slowly releasing the clutch, avoiding sudden braking, and maintaining a safe following distance. Relevant details are as follows: Smooth driving start: After pressing the clutch and igniting, use your left foot to press the clutch pedal all the way down to fully disengage the clutch, shift the transmission into gear, release the handbrake, and apply the throttle. Precautions for starting the car: Do not look down at the controls; keep your eyes on the road ahead and both sides. For downhill starts, release the brake before pressing the throttle and lifting the clutch. For uphill starts, release the brake when the engine sound becomes steady.

19

1

Share

Why does the motorcycle jerk and surge when accelerating at low speeds?

The reasons for a motorcycle jerking and surging when accelerating at low speeds are as follows: Fuel supply issue: The fuel tank cap or gasoline filter may be slightly clogged, which can be resolved by cleaning them. Carburetor problem: The carburetor may have minor blockages, which can be fixed by replacing or cleaning it. Electrical issue: Check the spark plug for excessive carbon buildup, which can be scraped off. Air filter clogging: The air filter can be replaced or blown clean. Methods to start a motorcycle with a dead battery are as follows: Kick-start: Use the kick-start lever to start the motorcycle. Gear method: Shift to third gear, pull the clutch, push the motorcycle to gain speed, then release the clutch to start the engine. Charging: Charge the battery or replace it before starting.

15

1

Share

What Causes No Sound When Connecting Bluetooth in Volkswagen Cars?

The call volume on the phone may not be turned on. Alternatively, the volume on the car's navigation system or integrated unit might be off, both of which can result in no sound when Bluetooth is connected. Avoid Using in High Temperatures: Car Bluetooth MP3 devices should not be used in high temperatures. Especially during summer when the car interior temperature is excessively high (typically above 45 degrees Celsius), remember to unplug the car charger. Additionally, avoid knocking, dropping, or vibrating the Bluetooth MP3 during normal use, as this can easily damage the internal circuit board. Prevent Bluetooth from Getting Wet: Car Bluetooth MP3 devices should also be kept away from water or prolonged exposure to humid environments, as internal components may oxidize or corrode.

10

0

Share

What Brand is H?

There are two car brands with the H logo: one is a circle with a straight H, which is Honda. The other is a circle with a slanted H, which is Hyundai. Honda: Honda, officially known as 'Honda Motor Co., Ltd.', is a multinational automobile manufacturer listed on both the Tokyo Stock Exchange (TYO) and the New York Stock Exchange (NYSE). Hyundai: Hyundai (English: Hyundai) is a car brand under Hyundai Motor Company, a Fortune 500 company. Its main models include the Sonata, Elantra, Santa Fe, and Tucson. Founded in 1947, Hyundai is a South Korean car brand primarily producing SUVs and family sedans with engine displacements ranging from 1.6L to 2.7L.

11

4

Share

What items are included in the first maintenance and inspection?

The first maintenance at a 4S shop includes the following aspects: changing the engine oil and oil filter, cleaning the air filter; checking the fluid levels of various oils to ensure they are normal, inspecting the generator belt and wiper blades for any damage; checking the tire pressure for normal levels and examining the tires for uneven wear, bulges, or damage; inspecting the chassis, including the brake pads, brake discs, connecting rods, ball joints, CV joints, and checking for any scratches, etc.; examining all the switches in the vehicle; ensuring the lights are functioning properly. Estimated time: Completing all the work takes approximately 2 hours. Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice. Take these to the designated first maintenance facility for the vehicle's first maintenance. Note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven. The specific time varies by vehicle, generally after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance promptly, neither early nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The first maintenance time is calculated based on the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first will be the standard. The following inspections and replacements must be completed during the first maintenance of a new car: changing the engine oil, cleaning the three filters (oil filter, fuel filter, and air filter); checking the coolant level to ensure it is normal; inspecting the vehicle's brake system and the level of the clutch fluid; checking the power steering fluid level for normal conditions and examining all fluid pipe connections for leaks; inspecting the generator, air conditioning, water pump, and the condition of the belts for aging and tension; checking the tire pressure and wear condition, inflating the tires as needed, or performing tire rotation if wear is observed. When changing the engine oil, the oil filter must also be replaced. The choice of engine oil must refer to the "Vehicle User Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not wash the interior of the car with water: Many people clean their cars themselves during holidays, washing the body with water and scrubbing with a cloth. It is important to note that the interior of the car should not be washed directly with water. If the floor mats are dirty, use a vacuum cleaner or take them out, scrub them with a brush and detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the floor of the driver's compartment. If water enters, it will not dry naturally but will flow through the drainage holes to areas like the transmission, causing corrosion. The best practice is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the existing antifreeze and refill it with the same brand from the beginning. Different brands of antifreeze have significantly different chemical properties. The corrosion inhibitors in one brand may corrode those in another. Therefore, do not mix different brands of antifreeze to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When the bolts on a car become rusty during driving, some people apply oil to make them work smoothly again. However, lubricating the bolts and nuts on the wheels can pose safety risks. At high speeds, the bolts and nuts may loosen or even fall off, leading to driving failures. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) car: The starter of an EFI car is different from that of a conventional car. Its fuel injection control system can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

2

3

Share

What to Do If the Car Maintenance Manual Is Lost?

What is the penalty for going straight in a left-turn lane at a three-way intersection?

How to Start Driving Quickly and Smoothly?

Why does the motorcycle jerk and surge when accelerating at low speeds?

What Causes No Sound When Connecting Bluetooth in Volkswagen Cars?

What Brand is H?

What items are included in the first maintenance and inspection?

How Many Liters of Fuel Does a 125cc Motorcycle Consume per 100 Kilometers?

How to Use Left and Right Turn Signals in Subject 3?

Can private cars be converted to natural gas?

What to Do When Brake Calipers Rust?