What to Do If the Car Interior Mirror Becomes Loose?

What is Automotive Crystal Coating?

Automotive crystal coating is a reliable paint sealing technology that provides efficient and long-lasting protection for the car's paint, preventing environmental factors from affecting the paint's color. It is a completely different concept from automotive film coating, waxing, or glazing. The basic material used in crystal coating is SIO2 inorganic substance. Automotive paint crystal coating is a concept proposed to distinguish it from film coating, waxing, and glazing. The crystal coating forms several structures on the treated surface, typically at the molecular nano-level. Through the action of high-molecular polymers, an isolation layer is formed on the treated surface. This isolation layer has functions such as UV resistance, oil resistance, low surface energy, and hydrophobicity, thereby protecting the paint surface.

10

3

Share

Why is the car noise so loud?

The reasons for loud car noise are: 1. Chassis noise: Low-end cars only have a few small shock-absorbing rubber plates and a small amount of sound-absorbing blankets installed at the factory. Poor assembly, looseness, or aging and faulty parts in the suspension system cannot effectively reduce vibrations; 2. Tire noise: Vibrations and noise caused by uneven road surfaces can also enter the cabin; 3. Engine noise: The most noticeable noise comes from the engine, especially in cars that haven't been serviced for a long time; 4. Wind noise: Wind noise occurs when the pressure of the oncoming wind exceeds the sealing resistance of the car doors during high-speed driving, and the faster the speed, the louder the wind noise; 5. Shock absorbers: Normally, shock absorbers reduce vehicle vibrations when going over speed bumps. Once the car's shock absorbers fail, their effectiveness diminishes, reducing comfort and increasing cabin noise.

15

5

Share

Why Does Tesla Have Two Charging Ports?

Tesla has two charging ports because it supports the new national standard, which allows for broader usage so more people can purchase and use Tesla's Superchargers less frequently. Charging port location: The charging interface is connected to the left taillight, and pressing the central control screen can control its opening and closing. Charging port opening method: It can be opened via the switch on the central control screen or by lightly touching the lower part of the charging port cover. Fast and slow charging ports: Both fast and slow charging interfaces are integrated under the cover. The slow charging port has an anti-theft function. The small dot above the slow charging port is the mechanical mechanism of this function. When activated, it extends outward to press against the unlock button on the slow charging gun head, preventing the gun head from being pulled out.

5

0

Share

How to Remove Adhesive Tape Marks from Car Paint?

Methods for removing adhesive tape marks from car paint are as follows: Wanhua Oil: Purchase a small bottle of Wanhua oil (green color), apply a small amount to the adhesive area, wait for about 5 seconds, and then wipe it off with a dry towel or tissue. This method is very simple. Essential Balm: Essential balm can also remove transparent adhesive tape marks. This method can be used regardless of the location. Gasoline: Using gasoline to remove transparent adhesive tape marks is also very effective. Alcohol: Relatively safe and does not harm the car body. Adhesive Remover: Simple and convenient, and it removes adhesive tape marks very cleanly.

14

4

Share

Do they take photos of seat belts at the service area exit?

Photos of seat belts are taken at the service area exit. Seat Belt Usage: First, adjust the seat belt position according to your height. When wearing the seat belt correctly, the shoulder strap should cross the chest, and the lap belt should fit snugly over the hips. After fastening the seat belt, the buckle will make a "click" sound. Pull the belt to ensure that the buckle is securely fastened and undamaged. Function of Seat Belts: Car seat belts are safety devices designed to restrain occupants during a collision, preventing secondary impacts with the steering wheel, dashboard, etc., or avoiding ejection from the vehicle, which could lead to injuries or fatalities.

18

2

Share

Why is one side of the car higher than the other?

The reason one side of the car is higher than the other is due to a malfunction in the car's suspension or tire pressure. The vehicle should be driven to a repair center for maintenance. Car Suspension: The car's suspension system consists of springs and shock absorbers between the car body and the tires. It supports the body and improves ride comfort. Different suspension systems provide varying ride experiences for passengers. The suspension system determines the car's comfort, stability, and safety, making it one of the most critical components in modern vehicles. Tire Pressure: The standard tire pressure is 2.4-2.8 kg/cm². As long as the car's tire pressure is within this range, it is safe.

10

2

Share

What to Do If the Car Interior Mirror Becomes Loose?

What is Automotive Crystal Coating?

Why is the car noise so loud?

Why Does Tesla Have Two Charging Ports?

How to Remove Adhesive Tape Marks from Car Paint?

Do they take photos of seat belts at the service area exit?

Why is one side of the car higher than the other?

Which button automatically folds the Murano's rearview mirrors?

What to Do If Your Electric Vehicle Runs Out of Battery Midway?

Symptoms of a Faulty Car Ignition Coil High-Voltage Pack

What to Do When the Fuel Tank Cap of Landwind X7 Won't Open?