What to Do If the Car Fuel Line is Leaking?

2 Answers
MacPhoebe
08/30/25 2:44am
Solutions for car fuel line leaks are as follows: 1. If the fuel line is broken, find a rubber or plastic tube with a diameter matching the fuel line to sleeve it. If the sleeve connection is not tight enough, use iron wires to fasten both ends to prevent oil leakage. 2. If the fuel line is cracked, clean the cracked area, then apply soap, wrap the cracked part with cloth strips or adhesive tape, and fasten it with iron wires, then apply another layer of soap. 3. If the fuel line joint is leaking, wrap cotton yarn around the lower edge of the horn, then tighten the fuel line nut and the fuel line joint; alternatively, chew bubble gum or maltose into a paste and apply it to the fuel line nut seat. Once it dries and solidifies, it will act as a seal. 4. If the fuel tank is damaged, causing a fuel leak, clean the leaking area and apply soap or bubble gum to temporarily block the leak. For larger leaks, use needle-nose pliers to flatten the radiator core copper tube.
Was this review help?
9
0
Share
DiReed
09/11/25 6:52am
Last time my friend's car also had a fuel line leak, which really scared him! Oil leaks are no small matter, especially fuel line leaks - if they come into contact with sparks, they could cause a fire. The first thing to do is immediately turn off the engine and stop the car - you absolutely must not continue driving. Open the hood to check the location of the leak. If it's a small crack, you can temporarily use soap or chewing gum to plug it and slow the leak. But never attempt to remove and repair the fuel line yourself - fuel line connections require professional tools and knowledge to handle properly. It's recommended to call a tow truck as soon as possible and take it to a repair shop, where the mechanic can check whether it's due to aging fuel lines or loose connections. During regular maintenance, pay attention to any undercarriage impacts. When replacing fuel lines, it's best to use original manufacturer parts, as aftermarket parts may not withstand high temperatures and corrosion well.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What type of suspension does the Lamborghini Gallardo use?

The Lamborghini Gallardo features double wishbone independent suspension at both the front and rear. The double wishbone suspension, also known as double A-arm independent suspension, consists of upper and lower wishbones that simultaneously absorb lateral forces, while the strut only bears the vehicle's weight, resulting in high lateral rigidity. The entire Lamborghini Gallardo lineup is equipped with a 5.2-liter V10 naturally aspirated engine, delivering 570 horsepower and a maximum torque of 540 Nm, paired with a 6-speed AMT transmission. The Lamborghini Gallardo measures 5112mm in length, 2016mm in width, and 1638mm in height, with a wheelbase of 3003mm. In terms of exterior design, the Lamborghini Gallardo boasts sleek full-LED headlights, along with two sets of daytime running lights for enhanced visibility. The front-end styling is particularly aggressive, with the nose line intentionally slightly raised towards the sides and then flaring outward.
20
1
Share

How to Reverse in a Narrow Road?

After the car enters the test area, turn the steering wheel one full turn to the left. The car body should slant towards line 8 and move forward. When the left edge of the car hood aligns slightly with the black and white seam of the asphalt road, straighten the steering wheel. Reverse the car. When the outer edge of line 1 reaches the base of the left rearview mirror, quickly turn the steering wheel fully to the right. Observe the distance between the car body and lines 5 and 3. Shift into first gear to exit the parking spot. When the horizontal plane on the car's emblem touches line 8, quickly turn the steering wheel one and a half turns to the left. Shift into first gear to exit the parking spot. When the horizontal plane on the car's emblem touches line 8, quickly turn the steering wheel fully to the right.
5
2
Share

How to Remove the Maintenance Reminder Light on JAC Refine S3?

Methods to remove the maintenance reminder light on JAC Refine S3: 1. Press the reset button and turn off the ignition switch; 2. Hold the reset button until the mileage display disappears; 3. Press and hold the reset button while turning on the ignition again to clear the light. The purpose of the maintenance light is: 1. To record the mileage of important components; 2. To remind the owner to perform maintenance. The JAC Refine S3 is a compact SUV with body dimensions of 4345mm in length, 1765mm in width, and 1640mm in height, with a wheelbase of 2560mm. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 85kW at 6000 rpm.
9
0
Share

What to Do When Wuling Hongguang Suddenly Loses Power?

Open the engine compartment hood separately, use jumper cables to connect the positive and negative terminals of the batteries of the two vehicles together, let the normally functioning vehicle rev the engine in neutral, and the vehicle with a dead battery should attempt to start. Before pushing the vehicle, turn on the ignition switch, shift the gear lever into gear after reaching a certain speed, then release the clutch pedal and accelerate to prevent the engine from stalling. If you have an emergency power source, the dead battery situation can be easily resolved. The operation is also very simple, just connect its clamps to the battery. Currently, most insurance companies generally offer this service.
20
2
Share

What Does Car Maintenance Generally Include?

Car maintenance items include: 1. Replacement of engine oil, oil filter, air filter, cabin air filter, fuel filter, transmission fluid, and engine belt; 2. Inspection of spark plugs, tires, and braking system; 3. Cleaning of throttle body and fuel injectors; 4. Topping up of brake fluid. Precautions for car maintenance include: 1. Avoid running the engine for extended periods in unventilated garages; 2. Avoid sucking on fuel pipes with your mouth; 3. Avoid getting carburetor cleaner on the car body. Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of a vehicle. Its purpose is to maintain a clean appearance, ensure normal technical conditions of the vehicle, eliminate potential hazards to prevent failures, slow down the deterioration process of components, and extend the service life.
9
4
Share

How to use the S gear in Camry?

How to use the S gear in Camry: While driving, simply push the gear lever into the S position. The S gear is the car's sport mode, where the transmission can shift freely, but the shifting timing is delayed, allowing the car to maintain high RPMs at lower gears for an extended period, thereby achieving greater torque output and acceleration. The Camry's body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. The Camry is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 178PS, a maximum power of 131kW, and a maximum torque of 210Nm, paired with a 10-speed continuously variable transmission.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.