What to do if the car cigarette lighter cannot be pulled out?

[McJuniper]

Insert and pull out vertically without shaking. Frequent shaking during removal can cause loosening and short circuits, burning out fuses and external devices. Below is additional information about the cigarette lighter: 1. Voltage: The cigarette lighter operates at 12 volts, matching the vehicle's battery voltage. It usually has a dedicated power line connected to it, separate from other circuits, and thus has its own fuse. 2. Reason: The cigarette lighter may get stuck due to deformed spring clips, a deformed socket, or poor contact from prolonged disuse.

[DeSawyer]

I've been driving this car for several years, and it's common for the cigarette lighter to get stuck and not come out. Usually, it's because the lighter is inserted too deeply into the socket or dust is blocking the spring. I first turn off the engine to cut the power, wait a few minutes, then gently twist the lighter body while steadily pulling it outward. This trick usually solves minor issues. If it still doesn't work, I use a small wooden stick to gently pry the edges and loosen the spring—never use pliers to yank it out, as this could damage the socket or the car's wiring. Afterward, I check if the lighter head is burnt or deformed, clean the dust inside the socket, and spray some electronic cleaner to keep it lubricated. Preventing this is simple: don’t leave the lighter plugged in all the time, remove and clean it after each use, and handle it during routine maintenance. If all else fails, don’t force it—take it to a reliable repair shop to avoid damaging the wiring, which could lead to bigger problems.

[SkylarLee]

Back when I was young and just started driving, I used to panic when the cigarette lighter got stuck. Now I've learned a trick or two. Try restarting the car after turning it off to reset the electronic system, then gently wiggle the lighter to pull it out. If it's really stuck, wrap it with a soft cloth and twist slowly to prevent slipping and protect the surface. Possible reasons include the lighter being deformed by high heat or dust in the socket; after cleaning, use a small brush to clean the inside of the socket. To prevent this, always remove the lighter before parking and clean the socket area with a damp cloth to keep it clean. Another tip: don't forcefully pull it out while driving, as it can distract you and cause accidents. If all else fails, buy a better-quality lighter as a backup, or have a repair shop check the wiring for safety.

[Teixeira]

If the cigarette lighter can't be pulled out, it's usually due to the socket spring being stuck. Don't yank it forcefully in a hurry. A simple method: after turning off the engine, rotate the lighter twice while gently pulling it outward evenly; this often loosens it. Check the bottom for any foreign objects or burn marks, and use a small cotton swab to clean dirt around the edges. If it still won't budge, don't force it—visit an auto shop for professional tool adjustment. Avoid leaving the lighter in the socket too long to prevent jamming.

[VanJoy]

It's really annoying when the cigarette lighter gets stuck while driving, but patience is key. First, park and turn off the engine, wait a few minutes for it to cool down, then gently wiggle the lighter and pull it out slowly. If it doesn't budge, check if there's any debris blocking the socket and try wiping it with a clean cloth. Avoid using excessive force to protect the car's interior and wiring. To prevent this, always remove and store the lighter after use, and keep the socket clean. If you can't fix it yourself, leave it to the 4S shop—don't risk DIY repairs.