What to Do If the Car Always Stalls When Starting?

1 Answers
VanAlexandra
07/28/25 6:42pm
If the car always stalls when starting, the solutions are: 1. Check each system for faults or damages; 2. Remove the spark plugs to see if they need replacement; 3. Clean the throttle body; 4. Slowly release the clutch while increasing the throttle when raising the RPM; 5. Shift gears only when the speed has increased to the appropriate level for the corresponding gear. The reasons for the car stalling when starting are: 1. Faults in the intake system, ignition system, or fuel system; 2. Faulty spark plugs; 3. Clogged throttle body; 4. Improper coordination between the throttle and clutch, or inaccurate clutch half-engagement; 5. Mismatch between the gear and speed.
Was this review help?
19
1
Share
More Forum Discussions

Should a 10-Year-Old Car Use 30 or 40 Oil?

10-year-old cars should use 40 oil. Here are the specific reasons: 1. Severe engine wear in older cars: For older cars, components such as the valve train and connecting rod mechanisms have already experienced significant wear. Therefore, it is advisable to choose a higher viscosity 40 oil. 2. Higher viscosity of 40 oil: 40 oil has a higher viscosity compared to 30 oil, allowing it to form a thicker oil film on engine components. This helps reduce further wear and noise caused by increased component gaps. Note: Under normal circumstances, if the owner notices increased fuel consumption, reduced power, or oil burning, these are signs of engine wear. It is recommended to switch to a suitable oil at this point.
6
3
Share

Do You Need to Lift Off the Throttle When Shifting with Paddle Shifters?

Shifting with paddle shifters requires lifting off the throttle. Here is an introduction on whether to lift off the throttle when shifting with paddle shifters: 1. Introduction: As a quick shifting method, paddle shifters can significantly enhance driving operability. Paddle shifters are usually located behind the steering wheel. 2. Notes: When operating paddle shifters, drivers typically only need to push the gear into D, S, or manual mode. With paddle shifters, drivers can complete upshift and downshift operations without taking their hands off the steering wheel, because the paddle shifters are conveniently located behind the steering wheel, making shifting efficient and easy.
12
1
Share

What is the penalty for driving without vehicle inspection?

Driving without vehicle inspection will result in a fine of 200 yuan. Here are more details: 1. Legal basis: Article 58 of the "Road Traffic Safety Law of the People's Republic of China" stipulates that driving a motor vehicle without passing the inspection will result in a fine of 200 yuan. 2. Penalty for overdue inspection for one year: Article 67 of the "Road Traffic Safety Law of the People's Republic of China" states that if a motor vehicle fails to undergo regular safety technical inspection on time, the driver or vehicle owner will be fined 500 yuan for each missed inspection for cars, and 200 yuan for other motor vehicles for each missed inspection.
4
2
Share

How to Identify Tire Tread Patterns?

Tire tread patterns can typically be viewed on the sidewall of the tire. Below are the types of tire tread patterns and considerations: 1. Unidirectional Tread: Combining the advantages of both lateral and longitudinal patterns, unidirectional tread offers excellent braking performance, superior dry and wet grip, and strong drainage capabilities, making it suitable for high-speed driving. 2. Asymmetric Tread: This type features different tread patterns on the left and right sides of the tire. The outer tread is designed for cornering and handling with high lateral support, ensuring dry-road cornering performance. The inner tread provides better anti-skid performance on wet surfaces. 3. Block Tread: Often used in off-road tires, block tread is also known as off-road tread. The grooves are interconnected, forming an independent tread structure. Off-road tread blocks are larger with deeper grooves, enhancing traction and grip. 4. Composite Tread: Tire design may incorporate the strengths of various tread types, improving both handling and straight-line stability while enhancing grip and self-cleaning capabilities. 5. Considerations: With numerous tread types available, selection should be based on vehicle performance and specific purchase priorities.
10
5
Share

Is it necessary to maintain the car at a 4S shop?

It is necessary. Car 4S shops are more professional in focusing on brand models and have higher efficiency in maintenance. When encountering some relatively complex vehicle faults, 4S shops also have some high-end instruments that can solve the problems well. Benefits of maintaining the car at a 4S shop: 1. Professional division of talents: Technicians are only allowed to perform maintenance operations, while senior technicians are qualified to maintain and repair vehicles, and each car's maintenance or repair work is fully responsible by an engineer. 2. Genuine parts supply: The original maintenance parts of the car have a formal and unified supply source, which ensures both quality and unified prices. 3. Strict maintenance operation procedures: The maintenance operation procedures are quite strict, specifying how to maintain the car after driving a certain number of kilometers, which parts to replace, and the charging standards for each process are clearly defined.
19
2
Share

How Long Does It Generally Take for a Car to Be Scrapped?

Private cars and commercial vehicles have different scrapping periods, as detailed below: Private car scrapping regulations: For 5-seat family cars and 7-seat SUVs, as well as small and micro non-commercial vehicles, there is no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping process. In addition to the above-mentioned vehicles, small and micro non-commercial passenger cars, large non-commercial cars, and wheeled special-purpose machinery vehicles also have no usage period limit. Common commercial vehicle scrapping regulations: Small and micro taxi passenger cars have a scrapping period of 8 years, medium-sized taxi passenger cars have a scrapping period of 10 years, and large taxi passenger cars have a scrapping period of 12 years. Public transport passenger cars have a scrapping period of 13 years, other small and micro commercial passenger cars have a scrapping period of 10 years, and large and medium-sized commercial passenger cars have a scrapping period of 15 years. Micro commercial trucks have a scrapping period of 8 years, while light and large commercial trucks have a scrapping period of 10 years.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.