What to Do If the Car Air Conditioning Refrigerant Leaks?

What are the effects of applying car film on rainy days?

There is no effect; you can apply the film even on rainy days. On cloudy days and after rain, the air humidity is higher, static electricity is reduced, and indoor and outdoor dust is significantly less, making it the best time to apply film. It should be noted, however, that film should not be applied in dusty weather or environments. The downside is that the moisture used during the film application process evaporates more slowly on cloudy days, requiring an additional 1-2 days of waiting before rolling down the side windows. Film application precautions: 1. After applying car film, avoid rolling down the windows for three days; 2. Do not wash the car for three days; 3. For vehicles with sunroofs, do not open the sunroof while driving, especially at high speeds, for three days; 4. In winter, it is recommended not to roll down the windows or wash the car for a week after applying the film. The front and rear windows may take about a month to fully dry.

6

5

Share

Is it better to use internal or external circulation when turning on the air conditioning?

It is better to use external circulation when turning on the air conditioning. The air conditioning system has two circulation modes: internal and external. Here is relevant information about internal and external circulation: 1. Internal circulation means the air inside the vehicle is recirculated, i.e., the air from the vents comes from inside the cabin, which is sealed and not connected to the outside atmosphere. External circulation means outside air enters the cabin, so the air from the vents comes from outside, and the cabin is not sealed. 2. Internal circulation only involves air blown by the fan circulating inside the vehicle. Since no outside air is involved, it saves fuel and cools (or heats) faster, but the downside is that it does not refresh the air inside the vehicle. External circulation means the fan draws fresh air from outside into the cabin, which improves air quality inside the vehicle, but cooling (or heating) is slightly slower and consumes more fuel.

16

4

Share

What Type of Air to Use for Defogging the Car in Summer?

Actually, whether you use warm or cold air, both can effectively defog the car, but they work on different principles. Here are the key differences: 1. Cold Air Defogging: The advantage of this method is its speed. It quickly balances the temperature inside and outside the car near the windows, acting like an invisible barrier between the heat and moisture from passengers and the glass, preventing contact. Remember to switch the air conditioning to external circulation mode. The downside is that it can get quite cold, and you need to keep the cold air on to maintain the effect. 2. Warm Air Defogging: This method is more sustainable. It works by increasing the temperature to evaporate the fog droplets, essentially 'heating' the car glass. However, this approach can be initially frustrating as it may temporarily increase fogging inside the car. Additionally, this method is ineffective when the car has just started and the engine hasn't warmed up yet.

11

0

Share

What to Do If the Clutch Is Too Heavy?

Remove the clutch mechanism for cleaning and maintenance, replace the necessary lubricating oil, and adjust the clearance according to standards. Reasons for a heavy clutch: 1. Cable damage: This is a common issue with cable-operated clutches. Damage to the clutch cable increases friction resistance, making the clutch pedal heavier. 2. Worn clutch disc: The clutch disc is sandwiched between the pressure plate and flywheel, with the clamping force provided by the diaphragm spring of the pressure plate. 3. Grease on the release bearing seat: The small gap between the release bearing and its seat, combined with sticky grease, increases resistance. 4. Damaged diaphragm spring: When pressing the clutch, the diaphragm spring contacts the release bearing, making it prone to wear. 5. Loose release fork pivot: A loose pivot causes uneven pressure from the fork on the release bearing, leading to uneven pressure on the diaphragm spring. 6. Annealed diaphragm spring: The resistance of the clutch pedal isn't consistent throughout; it's highest just before and after the diaphragm spring separates, then decreases post-separation.

16

0

Share

Does Antifreeze Corrode Metal?

Automotive antifreeze is corrosive. During use, antifreeze tends to generate acidic substances, which can corrode metals. Functions of Antifreeze: Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent properties such as preventing freezing in winter, boiling in summer, and providing year-round protection against scale and corrosion. Antifreeze Replacement Cycle: For vehicles that operate for extended periods, such as taxis, high-quality antifreeze should generally be replaced once a year. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which reduces the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding it. Long-life antifreeze can remain effective for up to three years. If suspended particles, sediments, or signs of deterioration or discoloration are observed in the antifreeze, it should be replaced promptly, and the system should be cleaned.

1

2

Share

Can You Apply Window Film on Rainy Days?

It is possible to apply car window film on rainy days. In fact, overcast or rainy weather is ideal for applying car window film, regardless of the season. The primary functions of car window film are UV protection and shatterproof safety. During rainy days, there is significantly less airborne dust, which benefits the aesthetic outcome. Professional installers are generally aware of these considerations. Below are relevant details: 1. Advantages: The benefit of applying film on rainy days is the reduced dust in the air, making it easier to avoid dirt spots. Some professional shops even have specialized humidification and dust removal equipment, eliminating the need to consider this factor. 2. Disadvantages: The drawback is that moisture used during the film application process evaporates more slowly in humid conditions, requiring an additional 1-2 days before the side windows can be rolled up or down. Additionally, the rear window defroster should not be used immediately after film application. In heavy rain conditions, if the rear window fogs up, it is advisable to postpone the film application.

19

1

Share

What to Do If the Car Air Conditioning Refrigerant Leaks?

What are the effects of applying car film on rainy days?

Is it better to use internal or external circulation when turning on the air conditioning?

What Type of Air to Use for Defogging the Car in Summer?

What to Do If the Clutch Is Too Heavy?

Does Antifreeze Corrode Metal?

Can You Apply Window Film on Rainy Days?

What procedures are required to downgrade from B2 to C1 license?

How to Set the Horn Sound When Locking a Honda Accord?

How does the airbag deploy?

Is 0w-20 Oil Fully Synthetic?