What to do if the car AC switch light is not on?

Where is the air conditioning filter of the Qashqai located?

Dongfeng Nissan Qashqai's air conditioning filter is located behind the glove box on the right side of the passenger dashboard, and the glove box needs to be removed to access it. Below is more information about the air conditioning filter: 1. When driving with the air conditioning on, the car draws in external air into the cabin. However, the air contains various particles such as dust, pollen, soot, grinding particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. 2. The function of the air conditioning filter is to ensure the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. It separates solid impurities like dust, pollen, and grinding particles from the air, and absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc. It has strong and long-lasting moisture absorption, preventing the car windows from fogging up, ensuring clear visibility for drivers and passengers, and enhancing driving safety. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. It effectively sterilizes and deodorizes, maintaining clean air in the cabin and preventing bacterial growth, thus creating a healthy environment.

16

3

Share

How to Fix a Broken Manual Seat Height Adjustment?

Bicycle seat height adjustment is called a "seat post." There is a locking screw where the "seat post" is installed on the frame. Loosening this screw allows you to raise or lower the "seat post" to adjust the seat height. Once adjusted to the desired height, tighten the screw. Below is more information about car seats: 1. Seat height adjustment is mainly to adjust the line of sight height, thereby adjusting the visibility range in front of the vehicle. When adjusting the seat height, ensure that the eye level is positioned slightly above the center of the vertical distance of the front windshield for optimal visibility and a good view of the road ahead. 2. The primary function of the seat headrest is safety, which is more important than comfort. In fact, the headrest should be considered more as a safety feature. A small car headrest can protect the head and neck of the driver and passengers in the event of a traffic accident, minimizing potential injuries.

20

2

Share

How to Use Daytime Running Lights?

Unlike other car lights, daytime running lights do not have a switch (except for aftermarket daytime running lights) and cannot be turned on or off at will. They usually turn on automatically when the engine starts and turn off automatically when the driver turns on the regular headlights. Below is some relevant information about daytime running lights: 1. As the name suggests, daytime running lights are used during the day. If used at night, the driver will not get the necessary illumination and may be affected by glare, compromising driving safety. Although daytime running lights appear very bright from the outside, their actual illumination effect is weak and almost useless for the driver inside the car to light up the road. So, remember to turn on the headlights at night. 2. In terms of purpose, daytime running lights and position lights (also known as parking lights) are both signal lights used to alert other vehicles or pedestrians. The difference is that the former is used during the day, while the latter is used in darker conditions.

2

4

Share

How to Operate When Waiting at Traffic Lights During Subject 3 Driving Test?

Subject 3 Driving Test operation steps when waiting at traffic lights are as follows: 1. Steps for stopping at a red light: (1) Observe the traffic signal conditions on the road ahead in advance. If encountering a red light, prepare to decelerate early. (2) After slowing down, gently press the clutch with your left foot (fully depressed), press the brake with your right foot, shift to neutral, and engage the handbrake. 2. Steps for starting at a green light: (1) Wait for about 3-4 seconds (or according to your habit), then slowly release the clutch until the vehicle vibrates slightly, release the handbrake, and start in first gear. (2) After the clutch is properly engaged, maintain this position for about 5 seconds. Even if you release the clutch abruptly, the engine won't stall. Then press the accelerator, speed up, and shift to second gear while crossing the intersection.

20

5

Share

Can You Still Drive with Transmission Slippage?

Transmission slippage means you should not continue driving. Below are the specific reasons for transmission slippage: 1. Check the quality of the hydraulic fluid. If the hydraulic fluid appears brownish-black or has a burnt smell, it indicates that the friction plates of the clutch or brake bands are burnt out, and the automatic transmission should be disassembled for repair. 2. Conduct a road test. A road test can determine whether the automatic transmission is slipping and identify the affected gear and the severity of the slippage. Place the gear selector in different positions and drive the car. If the engine speed suddenly increases when the automatic transmission shifts to a certain gear, but the vehicle speed does not increase accordingly, it indicates slippage in that gear. The easier it is for the engine speed to rise during slippage, the more severe the slippage is. 3. Check the fluid level of the automatic transmission. For an automatic transmission exhibiting slippage, first check the hydraulic fluid level. If the fluid level is too low or too high, adjust it to the normal level before further inspection. If the transmission stops slipping after adjusting the fluid level, disassembling the transmission may not be necessary.

19

3

Share

Can You Continue Driving with a Faulty Transmission Valve Body?

You should not continue driving if the transmission valve body is faulty. A malfunctioning transmission valve body can cause sticking issues. If there is a leak, it may lead to gear shift shocks during the transmission's shifting process, significantly reducing shifting efficiency and also causing a decrease in the vehicle's power. Here are specific details about the transmission valve body: 1. The transmission valve body is a hydraulic control unit. During operation, the spools on the valve body move left and right to change the direction and pressure of the hydraulic fluid, enabling the transmission to shift gears automatically. 2. Damage to the transmission valve body is more common in automatic transmissions. Automatic transmissions, as opposed to manual transmissions, allow the vehicle to shift gears automatically based on driving speed and engine RPM.

19

4

Share

What to do if the car AC switch light is not on?

Where is the air conditioning filter of the Qashqai located?

How to Fix a Broken Manual Seat Height Adjustment?

How to Use Daytime Running Lights?

How to Operate When Waiting at Traffic Lights During Subject 3 Driving Test?

Can You Still Drive with Transmission Slippage?

Can You Continue Driving with a Faulty Transmission Valve Body?

What is the tire size of the JAC Refine S3?

What to do if a piece of paint is scraped off the car door?

Where is the anti-theft screw for Audi A4?

What to Do When Tire Pressure Warning Keeps Showing?