···
Log in / Register

What to do if the BAIC EU5 screen freezes?

3 Answers
MacOlive
07/29/25 7:39pm
Solutions for BAIC EU5 screen freezing: You can try restarting it. If restarting doesn't help, it is recommended to go to a 4S shop and have the staff check for faults. The BAIC EU5 is a pure electric compact sedan under BAIC New Energy, featuring a single motor configuration with front-mounted motor and front-wheel drive. The BAIC EU5's large front grille paired with the slender headlight clusters on both sides gives the car a more fashionable and imposing look. The side profile adopts a dual waistline design, with one waistline running through the front and rear door handles, enhancing the sporty appearance. At the rear, the car features clean lines, and the taillight design stretches the vehicle's horizontal visual effect. The BAIC EU5 uses MacPherson independent suspension at the front and multi-link independent suspension at the rear.
Was this review help?
7
1
Share
MacAaron
08/14/25 2:54pm
I've been driving the BAIC EU5 for a while and have encountered screen freezes several times. Usually, it's just the system getting stuck. Holding down the power button on the center console for about 10 seconds can force a reboot, which works well. If that doesn't help, try turning off the car, waiting a few minutes, and then starting it again, or check if there's a software update notification for the infotainment system—older versions often have bugs. The screen tends to freeze when it overheats, so avoid leaving it exposed to direct sunlight when parked and ensure some ventilation. When the screen freezes, it affects navigation and reversing, so use your phone's map as a temporary solution—safety first. Regularly back up things like playlists to avoid losing them. If all else fails, take it to a 4S shop to check the wiring or replace hardware; it's not expensive but saves hassle. The EU5 electric car's screen is highly integrated, so software updates are crucial. Use the official app to sync settings to avoid issues. Take good care of it, and avoid installing unnecessary apps to reduce lag.
Was this review help?
19
0
Share
Expand All
DeElliot
10/15/25 6:33am
When driving the EU5 to pick up family, a frozen screen can be quite annoying. If it freezes while driving, don't panic—safely pull over and turn off the engine. Try a simple reboot: hold the power button for 10 seconds to see if the screen lights up. If that doesn't work, check the fuses in the fuse box for any signs of melting or looseness—you can find it under the driver's seat. Be extra cautious if it affects the reversing camera, especially at night. It's advisable to visit a professional repair shop for diagnosis, as it might be due to loose contacts or a system bug. During regular maintenance, have them inspect the multimedia connection cables—replacing them is low-cost. Such issues are common in electric vehicles; the EU5's screen sensitivity is decent, but prevention is better than cure. Avoid DIY modifications to prevent compatibility issues, as driving data safety is crucial. Minimize prolonged operation in high-temperature environments to extend its lifespan. Address the issue promptly to avoid affecting audio and entertainment functions.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What does a cloned vehicle mean?

A cloned vehicle refers to vehicles where criminals illegally forge and obtain the license plates, model numbers, and colors of legally registered vehicles, thereby disguising smuggled, assembled, scrapped, or stolen cars under a 'legal' facade. Cloned vehicles are also known as 'copycat cars' or simply 'cloning,' which involves affixing counterfeit labels—a practice strictly prohibited by the state. Active Cloning: An individual legally owns one vehicle but purchases another identical model and color for themselves or their relatives/friends. They then falsely report the loss of the license plate and vehicle registration documents to obtain a replacement plate, which is installed on the unregistered new vehicle to evade various fees. Alternatively, they may directly acquire or counterfeit identical license plates through illegal means for the new vehicle. Passive Cloning: Cloners note down the license plate numbers of legally registered vehicles matching their unregistered car's model and color on the streets. They then forge identical plates through illegal channels and install them on their own vehicles. This not only allows them to avoid paying relevant fees but also shifts blame onto innocent original vehicle owners if traffic violations captured by electronic surveillance are attributed to the cloned plates.
6
4
Share

Is It Effective to Install a DSP in Car Audio?

Since a DSP is an amplifier, installing a DSP on top of the existing amplifier allows you to benefit from the DSP's wide adjustable range while also leveraging the high power of a regular amplifier, which definitely improves sound quality. Installing a DSP in car audio is effective. Modification Considerations: Avoid "Live Installation": When performing electrical modifications in a car, just like in any other electrical work environment, safety should always be the top priority. For example, avoid starting the car to prevent power flow, and it's best to formally connect the power only after completing the installation and wiring. Ensure Correct Wiring: For the DSP's signal processing quality to be fully utilized, wiring is crucial. Especially if the DSP does not use a vehicle-specific wiring harness and needs to connect to the rear amplifier via RCA cables, the RCA cables, speaker wires, and power cables should be laid out as separately as possible during wiring to avoid potential interference. Additionally, the wiring harness must be securely fixed and properly protected to prevent damage from moving parts in the car. Head Unit Removal Method: Connecting the DSP to the head unit means the head unit must first be removed from the dashboard, and this process requires some care. The removal method for the dashboard panel varies by car model. If you're doing it yourself or the shop hasn't worked on this model before, it's best to consult the manual or a removal guide first to determine where to start. As for tools, generally, a screwdriver and a pry bar are sufficient. With the right position and force, removing the head unit isn't difficult. Label Each Wire: If the DSP does not use a vehicle-specific wiring harness, each RCA cable and speaker wire should be labeled with sticky notes or another method to distinguish groups and polarity, ensuring correct connections on both ends. This good practice is also useful when installing amplifiers and speakers. Avoid Vibrations/Shaking in Installation Location: If the installation is not secure or the chosen location is prone to continuous resonance, the DSP may shake over time, leading to loosening or damage of internal circuit components and external wiring. Therefore, careful consideration is needed when selecting the installation location. Common DSP installation locations, such as under the seat or in the trunk, are generally suitable and ideal for stability.
2
5
Share

Which items require the use of turn signals in the Subject 2 driving test?

There are a total of 6 instances where turn signals are required in Subject 2: When starting the vehicle, turn on the left turn signal; When starting on a slope, turn on the left turn signal; During parallel parking, turn on the right turn signal when the vehicle passes the parking spot and stops 30 cm from the curb before preparing to reverse; Before shifting into reverse gear during parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking space during parallel parking, shift into drive gear and turn on the left turn signal, then turn it off promptly after exiting; When entering the right-angle turn area, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect use of turn signals are as follows: Failing to use or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking will result in a 10-point deduction. Using turn signals for less than 3 seconds before starting, turning, changing lanes, overtaking, or parking will result in a 10-point deduction. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles (C1, C2) include reversing into a parking space, parallel parking, stopping and starting on a slope (canceled for C2), right-angle turns, and S-curves (five mandatory items; some regions include a sixth item, high-speed card collection). The test items for large vehicles (A1, A2, A3, B1, B2) include pole parking, stopping and starting on a slope, parallel parking, single-plank bridge crossing, S-curves, right-angle turns, passing through a narrow gate, passing through continuous obstacles, driving on bumpy roads, U-turns on narrow roads, and simulated scenarios such as highways, continuous sharp mountain turns, tunnels, rainy/foggy conditions, slippery roads, and emergency handling.
18
3
Share

Is the Jog a Yamaha product?

The tire specifications for the 14th-generation Sylphy are: 195/60R16. In the 195/60R16 tire model, 195 represents the tire width, which actually refers to the part of the tire that contacts the ground. 60 represents the aspect ratio, which is the ratio of the height from the rim to the tread relative to the maximum width of the tire section. R refers to radial tires. Generally, this type of tire is used for family cars, offering good wear resistance and a long service life. 16 represents the tire size. Different types of vehicles use different types of tires. The larger the vehicle size, the larger the tire size used. The wider the tire width, the better the tire's grip. In addition to the model, tires are also marked with the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord fabric, R for rayon cord fabric, N for nylon cord fabric, G for steel cord fabric, ZG for steel radial cord fabric tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specifications: Indicate the rim specifications compatible with the tire for practical use, such as standard rim 5.00F. Precautions for using Sylphy tires are as follows: Tire wear: Worn tire treads can cause loss of grip, affect handling, increase the risk of blowouts, and reduce the tire's ability to expel dirt and water. Tire pressure: It is advisable to have a tire pressure gauge to check tire pressure regularly. Remove debris from treads: Foreign objects in the tire should be removed promptly to prevent "stubborn" stones from getting stuck in the treads, which can puncture the tire body when the tire wears to a certain extent, leading to air leakage or even blowouts. Tire rotation: Rotate tire positions every 10,000 kilometers to evenly distribute tire fatigue, prevent uneven wear, and extend tire life.
17
2
Share

How to Use an Old Car CD Player?

In normal playback mode, all tracks on the CD will be played in sequential order. To change the playback sequence, press the 'RDM' button. Pressing the button will play the first 10 seconds of all tracks. Pressing the button again will resume normal playback from the currently playing track.
2
5
Share

How to Turn on the Automatic Headlights on a Mondeo?

The headlight switch of the Mondeo is located at the lower left side of the steering wheel. To operate the lights, first ensure the vehicle is in the ignition-on state. Simply turn the knob to the automatic mode position to activate the automatic mode.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.