What to Do If the B2 Driver's License Has Not Been Inspected on Time?

1 Answers
Emil
07/25/25 5:10am
Solutions for a B2 driver's license that has not been inspected within different time frames are as follows: 1. Within 1 year: If the B2 driver's license has not been inspected within 1 year, you can apply for a supplementary inspection. The process is the same as the normal annual inspection. 2. More than 1 year but less than 3 years: If it exceeds 1 year but is less than 3 years, the B2 driver's license will be revoked and locked after one year. You need to bring your ID card and driver's license to the local vehicle management office where it was issued to participate in a study session. The driver's license can only be restored after passing the subject one exam. 3. Overdue inspection for 3 years: If the B2 driver's license has not been inspected for 3 years, it will be downgraded to a C1 driver's license. The B2 license allows driving heavy-duty and medium-duty trucks or large, heavy, and medium-sized special operation vehicles. Most heavy-duty and medium-duty trucks are mainly trucks. Other vehicle types that can be driven with a B2 license include C1, C2, C3, etc.
Was this review help?
15
0
Share
More Forum Discussions

Will using 92-octane gasoline affect the Audi A3?

Audi A3 using 92-octane gasoline will have an impact, as it will reduce power output. The Audi A3 should be filled with 95-octane gasoline. Correct method for selecting gasoline octane rating: Check the label inside the fuel tank cap. There is always a (recommended standard) sticker on the inside of the car's fuel tank cap, which is the most accurate and scientific standard calculated by engineers based on the engine's technical parameters. Hazards of using the wrong gasoline: If a high-compression engine uses low-octane gasoline, it will cause incomplete combustion, severe engine vibration, reduced power output, damage to engine components, increased fuel consumption, and poor driving performance. However, if a low-compression engine uses high-octane gasoline, it will result in delayed combustion, meaning the auto-ignition point is not reached at maximum compression, leading to incomplete combustion as well. This requires additional fuel injection to ensure power output, which not only offers no benefit to the engine but also increases fuel consumption.
9
4
Share

What does the license plate in Ma'anshan start with?

Ma'anshan license plates start with Wan E. Ma'anshan City belongs to Anhui Province, whose abbreviation is Wan, hence the license plates begin with Wan E. Here is some relevant information: 1. Civilian vehicle license plates all have a Chinese character, which is the abbreviation of the municipality or province, followed by a letter representing the city or district. The combination of the Chinese character and letter can indicate where the vehicle is from. 2. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of a vehicle. They are usually made of aluminum, iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. License plates serve as a numbering and information registration system for vehicles, with the primary purpose of identifying the vehicle's region of registration and enabling the tracking of the vehicle's owner and registration details based on the plate.
2
3
Share

What does the rear button in the car mean?

rear literally means the rear or back. The Rear button in the car is the rear windshield defogger switch. Pressing it can remove the fog on the rear windshield. The rear button in the car is generally located in the air conditioning control panel. Here are some methods for defogging the rear windshield: 1. Open the windows for convection: You can open a gap in the windows on both sides, allowing the air inside and outside the car to form convection, reducing the temperature difference, and the fog will gradually disappear. 2. Use the air conditioning system: Simply select the appropriate gear of the air conditioning to use the wind blown by the air conditioning to defog. 3. Use professional defogging agents: Spray the defogging agent on the inner surface of the car glass, then wipe it clean. While removing dirt from the glass, it also forms a protective film to prevent water vapor from condensing into a fog layer on the glass.
6
4
Share

What is a Vehicle PDI Inspection?

PDI (Pre-Delivery-Inspection) refers to the pre-sale inspection record of a vehicle. During the period from when a new car rolls off the production line until it is sold, various issues may arise. Therefore, a pre-sale inspection is conducted before delivering the car to the consumer to ensure the vehicle is problem-free. PDI is a mandatory inspection that new vehicles must pass before delivery. Below is an introduction to PDI inspection: 1. According to standard procedures, a PDI inspection form (Pre-Delivery Inspection Certificate) with at least 40 items must be completed during vehicle handover. Do not blindly sign the inspection form, as signing indicates the user's acceptance of the vehicle's condition at the time of sale. 2. PDI inspection includes checking various control module system data, fuel system, lighting system, braking system, air conditioning system, steering system, cooling system, inspecting wheels (including spare tire and tire pressure), battery and various fluid levels, engine compartment wiring harness, cleaning the engine compartment and body surface, and deactivating the vehicle transport mode, among others.
4
4
Share

What are the differences between the domestic and imported Model 3 audio systems?

Here are the specific differences between the domestic and imported Model 3 audio systems: 1. Performance: The imported version features a more advanced audio system, equipped with two audio amplifiers. 2. Interior sound output: In the domestic version, the top and bottom speakers on both sides of the A-pillar do not produce sound, whereas in the imported version, all speakers are functional. Below is additional information about the Model 3: 1. Vehicle positioning: The Model 3 is a mid-sized electric vehicle with a wheelbase of 2875 mm, and dimensions of 4694 mm in length, 1850 mm in width, and 1443 mm in height. 2. Powertrain: The Model 3 is available in both rear-wheel drive and all-wheel drive versions. The all-wheel drive version is a dual-motor model, while the rear-wheel drive version is a single-motor model. The all-wheel drive version has a total motor power of 340 kW and a total torque of 639 Nm. The rear-wheel drive version has a maximum motor power of 202 kW and a maximum torque of 404 Nm.
15
3
Share

What is the name of Mazda's hatchback model?

Mazda's hatchback models include the Mazda5, Mazda6, Mazda CX-7, Mazda8, and Mazda CX-9. Among them, the Mazda5 and Mazda8 are hatchback MPVs, the Mazda6 is a hatchback station wagon, and the Mazda CX-7 and Mazda CX-9 are hatchback SUVs. Generally, cars come in different versions such as standard, base, mid, and high specifications, which refer to: 1. Base: Usually a simplified version without leather seats, power windows, and lacking many electronic control functions. 2. Standard: Includes basic electric controls such as power windows, power steering, and air conditioning. 3. Mid: Slightly more advanced than the standard version, including all standard features plus additional features like more airbags, a sunroof, leather seats, power seats, and seat heating. 4. High: Higher than all the above configurations, often considered the flagship version of the model.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.