What to Do If the Auto Start-Stop Suddenly Stops Working?

1 Answers
DelDavid
07/29/25 8:34am
If the auto start-stop suddenly stops working, it could be due to accidentally pressing the auto start-stop button on the car, causing the system to shut down. You should check whether the system has been turned off. There might also be other reasons causing the start-stop system to malfunction, in which case it is best to take the car to a 4S shop for inspection and repair. For manual transmission cars, the system will only activate after recognizing three actions: shifting to neutral, pulling the handbrake, and releasing the clutch. The auto start-stop function allows the engine to automatically shut off under certain conditions, such as waiting at a red light or during a temporary stop. When the vehicle needs to continue driving, the driver can give commands by releasing the brake, pressing the accelerator, or turning the steering wheel, and the engine will quickly restart, allowing the vehicle to continue moving.
Was this review help?
11
4
Share
More Forum Discussions

What license plate is used for hybrid vehicles?

Hybrid vehicles are divided into three types: plug-in hybrid, range-extended hybrid, and conventional hybrid. Among them, plug-in hybrids and range-extended hybrids are classified as new energy vehicles and can only use green license plates; conventional hybrid vehicles are not considered new energy vehicles and can only use blue license plates. New energy vehicles include four major categories: hybrid electric vehicles, pure electric vehicles, fuel cell electric vehicles, and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices). License plates, commonly known as car plates, are panels respectively hung on the front and rear of the vehicle. They are typically made of aluminum, sheet iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information.
14
2
Share

What car has a logo with two lions?

The logo featuring two lions belongs to Roewe. Its emblem consists of two standing oriental lions, which symbolize auspiciousness, dignity, and solemnity in Chinese culture. In Western culture, the lion also represents royalty and bravery. The upright posture of the lions embodies the brand's spirit of seeking innovation, continuous improvement, and transcendence. Roewe is an automobile brand under the Shanghai Automotive Industry Corporation (Group). Taking the Roewe RX5 as an example: it is a compact SUV with a length, width, and height of 4571mm, 1855mm, and 1719mm respectively, and a wheelbase of 2708mm. It is equipped with a 1.5T turbocharged engine with a maximum power of 127kw, paired with a 6-speed manual or 7-speed dual-clutch transmission.
14
1
Share

How to Check the Tire Pressure Monitoring in Octavia?

Octavia's tire pressure monitoring can be viewed on the dashboard. The tire pressure monitoring is always on. When the tire pressure warning light alerts, you should check the tire pressure of all four tires. If abnormal, after identifying the cause, you need to reset it. The tire pressure monitoring switch is located in front of the gear lever. With the key turned on or in idle state, press and hold for 3 seconds. The dashboard indicator light will flash once with a "ding" sound, indicating the initialization is complete. Octavia is a compact car launched by SAIC Volkswagen Skoda, with a length, width, and height of 4675mm, 1814mm, and 1460mm respectively, and a wheelbase of 2686mm. It is equipped with a 1.5L naturally aspirated engine, paired with a 5-speed manual or 6-speed automatic transmission.
4
1
Share

What are the symptoms of a bad front wheel bearing in a car?

The symptoms of a bad front wheel bearing in a car are: 1. The car will emit a loud humming noise after driving; 2. The engine temperature rises because the damaged front wheel bearing increases friction, generating high heat, and it will feel hot to the touch; 3. When the car is lifted with a jack and the tire is shaken, there will be play. The reasons for front wheel bearing damage are: 1. Improper assembly and adjustment; 2. Poor lubrication; 3. Quality issues with the bearing itself. The main functions of the front wheel bearing in a car are to bear weight and provide precise guidance for the rotation of the hub, enduring both axial and radial loads, making it a very important component.
8
5
Share

How to Choose Between Verna and Accent?

Verna: Dimensions are 4380mm in length, 1728mm in width, and 1460mm in height; Accent: Dimensions are 4300mm in length, 1705mm in width, and 1460mm in height. The Verna is equipped with an additional 3.5-inch LCD instrument panel and engine electronic anti-theft function compared to the Accent.
13
4
Share

How to Use High Beam and Low Beam?

If the road is poorly lit at night but there are streetlights or other sources of light, avoid using high beams and use low beams first. When there are no surrounding lights and visibility is poor in the distance, promptly switch to high beams. When driving on roads with poor lighting conditions and frequent oncoming traffic, you can alternately flash the high and low beams to avoid affecting other drivers.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.