What to do if the Audi Q5 sunshade curtain comes unglued?

2 Answers
Charles
09/01/25 8:37am
Audi Q5 sunshade curtain deglue repair method is to replace the corresponding sunshade cloth storage reel. The following are the relevant introductions: 1. Cleaning time: After using the sunroof for a period of time, a lot of dust will accumulate in the slide rails and gaps. If not cleaned regularly, it may damage the sunroof components. Generally, the sunroof should be cleaned after two or three months of use. 2. Electric sunroof: For electric sunroofs, it is best not to open them completely on bumpy roads, as this may cause vibration between the sunroof and the motor, leading to deformation of some components. In more severe cases, it may damage the motor.
Was this review help?
11
1
Share
VanHarrison
09/14/25 4:17am
The sunshade curtain on my Audi Q5 also came unglued last time, making a rattling noise when driving, which was really annoying. I fixed it myself by first pulling the curtain all the way down, gently peeling off the residue of the old glue, and then cleaning the surface with alcohol to remove dust and grease. Next, I bought some high-temperature-resistant automotive silicone adhesive, applied it evenly to the unglued area, and pressed lightly for a few minutes to let it bond. After letting it dry completely overnight, I tested it, and the result was quite good. The whole process cost less than 50 yuan, and the key was using the right type of adhesive—avoid regular super glue like 502, as it can corrode plastic. Now I check it regularly to prevent it from coming loose again. But if you're not familiar with disassembling parts, I'd recommend finding a reliable repair shop to handle it to avoid accidentally damaging the sunroof rails.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

Under What Circumstances Is a U-Turn Prohibited?

The following situations prohibit making a U-turn: 1. When there is a no left turn or no U-turn sign; 2. Crossing a solid line to make a U-turn is prohibited; 3. When the central guardrail or green island is close to the stop line, a U-turn is not allowed during a red light; 4. U-turns are prohibited on pedestrian crossings. When making a U-turn, the clutch must be engaged. Below is an introduction related to the clutch: 1. Classification: Clutches are divided into four types—electromagnetic clutches, magnetic particle clutches, friction clutches, and hydraulic clutches. 2. Principle: The clutch consists of friction plates, spring plates, a pressure plate, and a power output shaft. It is located between the engine and the transmission, transferring the torque stored on the engine's flywheel to the transmission to ensure the vehicle delivers appropriate driving force and torque to the drive wheels under different driving conditions, falling under the powertrain category. During semi-engagement, the clutch allows for a speed difference between the power input and output ends, meaning it transmits an appropriate amount of power through this speed difference.
18
2
Share

Which is Better: Fully Synthetic or Semi-Synthetic Engine Oil?

Fully synthetic engine oil is better. Here is an introduction to the differences between semi-synthetic and fully synthetic oils: 1. Source: Semi-synthetic oil is refined from mineral oil using hydro-cracking technology; fully synthetic oil is derived from ethylene or propylene dispersed from crude oil or natural gas, and then undergoes complex chemical reactions such as polymerization and catalysis. 2. Oil quality: Semi-synthetic oil is a semi-synthetic base oil; fully synthetic oil is the highest-grade oil among engine oils. Below is additional information on the functions of engine oil: 1. Lubrication: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bush. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. 2. Auxiliary cooling: Due to its low specific heat value and presence inside the engine, engine oil itself does not have a cooling effect. 3. Cleaning: High-quality engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation, washing away dirt generated on the working surfaces of parts via the flow of lubricating oil.
20
0
Share

Why is there no sound when connecting to car Bluetooth?

There are many reasons why there is no sound when playing music via car Bluetooth, including the car multimedia system volume not being turned on, the phone volume not being turned on, incompatibility between the phone and the car's computer, and Bluetooth signal interference. The following are related explanations about no sound in car Bluetooth: 1. Car multimedia system volume not turned on: If there is no sound when playing music via car Bluetooth, the first thing to check is whether the car multimedia system volume is turned on. If the volume is not turned on or is muted, there will naturally be no sound when playing music. 2. Phone volume not turned on: In this case, you need to increase the phone volume or ensure the phone is not in silent mode. 3. Incompatibility between phone and car computer: If the phone and computer are incompatible, issues may arise such as inability to connect to Bluetooth or error codes appearing after connection. 4. Bluetooth signal interference: When there are too many electronic devices in the car or when passing through areas with weak signals, Bluetooth signal interference may occur.
17
2
Share

What to Do When the Manual Transmission Key Won't Come Out?

If the manual transmission key won't come out, try turning the steering wheel slightly left or right to release it. Below are some relevant details about this issue: 1. Cause: The key may not come out due to a faulty ignition switch or if the steering wheel is locked to the left or right, jamming the ignition switch lock tongue. 2. Solution: If the steering wheel is jamming the ignition switch, gently turning it left or right should release the key. 3. Precautions: (1) When starting a manual transmission car, ensure the gear is in neutral and the clutch pedal is fully depressed before starting the engine. (2) Always depress the clutch pedal completely before starting the engine in a manual transmission car. (3) When starting the car, use the clutch half-engagement technique. Be careful to control the duration of half-engagement to avoid burning the clutch plate.
20
1
Share

Will driving not according to the guide lane be penalized?

Driving not according to the guide lane will be penalized. There are two types of guide lanes, one is a fixed guide lane, and the other is a variable guide lane. The specific introduction is as follows: 1. Fixed guide lane: The so-called fixed guide lane means that the direction of the lane is fixed and unchanging. A straight lane will always be straight, and a right-turn lane will always be right-turn. On such fixed guide lanes, the penalty for not driving according to the guide lane is a 2-point deduction and a fine of 200 yuan. If driving not according to the guide lane is accompanied by other violations (such as turning or making a U-turn in sections where such actions are not allowed and where no signs are posted, the lane may have a yellow prohibition marking to warn drivers that turning or making a U-turn is not allowed in this section, or making a U-turn or left turn in sections where such actions are prohibited), the penalties will be compounded. 2. Variable guide lane: The variable guide lane is the so-called tidal lane. The tidal lane changes the direction of the lane according to the time, for example, changing from straight to left turn. The warning signs next to the tidal lane will display the corresponding time period. For example, during the morning peak period, the tidal lane can only go straight, and during the evening peak period, the tidal lane can only turn left. The tidal lane has jagged lane lines and conspicuous roadside prompts. If you are not very familiar with the tidal lane, the best practice is not to drive into it.
10
0
Share

Which Times Are Free on Highways?

Highway toll-free periods occur during four major holidays: Spring Festival, Tomb-Sweeping Day, Labor Day, and National Day. The free period starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday. If you enter the highway during non-free hours but exit during the free period, it qualifies as toll-free passage. Conversely, entering during the free period but exiting during non-free hours does not qualify for toll exemption. Additional information: During highway toll-free periods, the exemption applies to passenger vehicles with 7 seats or fewer (including 7 seats) traveling on toll roads, which also includes motorcycles permitted to operate on regular toll roads.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.