What to Do If the Air Conditioning Cooling Effect of Wuling Hongguang Is Poor?

2 Answers
McConnor
07/29/25 9:20pm
Check whether the air conditioning system is short of refrigerant. The refrigerant needs to be checked and replenished every two to three years. If the condenser of the air conditioning system is dirty, which is common in summer due to more insects, it needs to be cleaned. Also, inspect the air conditioning belt for aging or slipping issues and replace it promptly if necessary. Here are the reasons for poor cooling effect of car air conditioning: 1. Low ambient temperature. If the ambient temperature is below 16 degrees, turn on the low-temperature compensation switch. If there is no heating when turned on, follow the mechanical air conditioning non-start detection method to check the heating wire and magnetic temperature switch. If the heating wire and magnetic temperature switch are normal but there is no voltage input, it can be determined that there is a fault in the main control board or wiring. 2. The compressor lacks refrigerant. Add refrigerant. 3. The compressor lacks oil. 4. Check if the capillary tube is blocked by dirt, oil, or ice. If the air conditioning sometimes cools and sometimes doesn’t, it is usually an ice blockage. If nitrogen is used to blow the pipeline and dirt or obstruction is found, it indicates a dirt or oil blockage.
Was this review help?
9
5
Share
LaAdriana
08/15/25 7:56pm
I've seen many cases of poor air conditioning cooling in Wuling Hongguang. The refrigerant might be insufficient; it tends to leak over time, especially in older models. You should check the pipe joints for oil stains, which indicate a leak. A non-working compressor is quite common—turn on the AC and listen for a humming sound or no sound at all. Clogged filters are the most frequent issue; check the manual for the location and clean out the dust for immediate improvement. If the fan is stuck, heat dissipation is poor, and the air from the vents feels hot in summer. A condenser covered in dust also needs cleaning, as it affects cooling efficiency. If you're not handy, it's best to visit a repair shop to have them test the high and low pressure and circuits with tools—it costs money but solves the problem for good. Develop a habit of regular checks, like cleaning the filter every season, to avoid many issues. If all else fails, roll down the windows for ventilation to avoid overheating on the road.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What Causes the Hood Resonance Noise?

The causes of hood resonance noise include engine issues, shield plate problems, and control system malfunctions. Engine Aging: If the vehicle has been in use for a long time, the rubber of the engine mounting pads may fatigue and age due to high temperatures, easily leading to resonance. In severe cases, there may also be bumping and friction noises. Engine Misfire: Engine misfire can also cause resonance phenomena in the engine. Shield Plate Deformation: Deformation of the engine shield plate or improper installation can cause engine resonance. This situation is relatively common and easy to resolve. Control System Issues: Another possible cause is vehicle resonance due to problems with the idle control system.
2
5
Share

What is the safety device of the transmission operating mechanism?

There are two types of safety devices for the transmission operating mechanism: the self-locking device and the interlocking device. The following is their introduction: 1. The self-locking device of most transmissions consists of a self-locking steel ball and a self-locking spring. 2. The interlocking device is mainly composed of interlocking steel balls and interlocking pins, that is, elements such as balls, pins, and sliders are added between the shift fork shafts, or elements such as frame plates are set to limit the movement trajectory of the shift lever and also prevent the engagement of two gears simultaneously. 3. The upper surface of each shift fork shaft has three grooves distributed along the axial direction. When any shift fork shaft moves axially to the neutral or a working gear position, one groove must be exactly aligned with the self-locking steel ball.
15
5
Share

How Much Torque Can a Dual-Clutch Transmission Withstand?

Dual-clutch transmissions can withstand 250 torque. Cool the transmission promptly: Dual-clutch transmissions are not suitable for frequent starts, prolonged low-speed driving, or stop-and-go traffic, as they are prone to overheating, which can lead to malfunctions. Once the vehicle's computer issues a warning, it is essential to stop immediately to cool down the transmission. Use lower gears: In unavoidable traffic congestion, try to use lower gears for following the traffic, including manual mode or S mode. This can significantly prevent the clutch from overheating due to the transmission's shifting mechanisms constantly changing.
7
0
Share

Is the Right Reverse Parking Narrowing Due to Steering Too Early or Too Late?

The reason for the right side narrowing during right reverse parking is steering the wheel too early. Here are the precautions for reverse parking: To perfectly enter the parking space during reverse parking: The timing of turning the steering wheel clockwise is crucial—it should be neither too early nor too late. If steered too early, it's easy to hit the right parking line; if too late, it's easy to hit the left parking line. This requires accurate judgment. Keep the speed slow: During reverse parking, the most important thing is to maintain a slow speed. If there's any deviation while reversing, the car's body may tend to touch the line. Timely detection allows for corrections, such as promptly straightening the steering wheel. However, if driving too fast, there won't be enough time to make adjustments.
12
0
Share

What brand of nanny vans do celebrities use?

Celebrity nanny vans are typically the Toyota Alphard. Introduction to Toyota's main vehicle models: Corolla, Camry, ES, Avalon, RAV4, Highlander, etc. Among these, the nanny van model is generally the Toyota Alphard. Industries Toyota is involved in: Toyota's product range spans automobiles, steel, machine tools, pesticides, electronics, textile machinery, fiber products, household goods, chemicals, chemical engineering, construction machinery, and the construction industry. In 1993, its total sales ranked 5th among industrial companies worldwide. The company produced 4.45 million vehicles that year, accounting for 9.4% of the global automotive market.
2
4
Share

How to use the auto switch for car windows?

To use the auto function for car windows: Simply press the window open or close button once, and the window will open or close automatically without the need to hold the button down. 'Auto' translates to 'automatic' in English. The car function buttons with auto include the following 6 features: 1. Automatic air conditioning: Press the AUTO button to activate the automatic air conditioning. After manually setting the temperature, the system enters an automatic temperature regulation state, controlling the air direction, blower speed, compressor operation, and vent temperature to maintain a comfortable cabin temperature. 2. Automatic headlights: Rotate the light switch to align with the AUTO mark, and the light control enters automatic mode. In this mode, a light sensor on the dashboard detects low external light conditions, such as entering tunnels, underground parking lots, or unlocking the car at night, and automatically turns on the daytime running lights or headlights to prevent delays or forgetting to turn them on. 3. Automatic wipers: Move the wiper switch to the AUTO position to activate automatic mode. A sensor on the windshield detects rainfall intensity, and the system automatically adjusts the wiper speed. 4. AUTOHOLD: This is the automatic parking function. Press the AUTOH button to turn on the system (indicated by the button light). When the vehicle frequently stops and starts, activating this function allows the system to automatically hold the brake after pressing it for more than 3 seconds, eliminating the need to keep the brake pedal pressed. To move forward, simply press the accelerator, and the parking system will release automatically. 5. Automatic anti-glare: This feature usually doesn’t have an AUTO label, but an indicator on the rearview mirror signifies its presence. During night driving, if a following vehicle shines bright lights or high beams, the system automatically adjusts the reflection to prevent glare and maintain visibility. 6. One-touch up/down: The auto button on the driver’s side window switch indicates that pressing or pulling the switch once will automatically raise or lower the window completely without holding the button. To stop the window during operation, press the switch again.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.