What to Do If Subject 3 Keeps Showing 'Under Processing'?

2 Answers
Nathan
07/24/25 4:23am
Subject 3 showing 'under processing' means it is currently being scheduled, and you just need to wait for the successful appointment. Related information: 1. Principle: If Subject 3 shows 'appointment application submitted,' it means the system will help the student arrange an exam date within the next week. If the appointment fails, it only means the first day of that week failed, and there are still several days left with chances to succeed. If it keeps showing 'appointment application submitted' without any updates, it might be a computer system failure, and it is recommended to consult the examination department. 2. Extension: Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment.
Was this review help?
2
5
Share
BrielleLynn
08/11/25 12:01am
I also encountered the 'processing' status stuck for a week during my last driving test (Subject 3), so I totally understand your anxiety. There are several common reasons for this: it could be due to fully booked test slots in your local area causing system backlog, or perhaps your uploaded ID photo was blurry/incomplete documentation caused the hold-up. I recommend first checking the 12123 traffic management app for any prompts about supplementary materials, while immediately contacting your driving school instructor—they can access specific reasons through the school's management backend. If there's no progress within three days, visiting the DMV counter with your ID is the most reliable solution (in my case, I discovered my medical form was missing a stamp). Remember not to repeatedly cancel and rebook appointments yourself, as this will reset your queue position and cause further delays.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

What Causes Severe Vibration When the Air Conditioner is Turned On?

Severe vibration when the air conditioner is turned on may be caused by three main reasons. Below is an introduction to the possible causes of air conditioner vibration: 1. Faulty Air Conditioner Acceleration Device: Normally, when the air conditioner is turned on, the idle speed should increase by 200-300 RPM. If this acceleration device is damaged, severe vibration occurs. The acceleration device is essentially the idle speed solenoid valve, which may also become stuck and can be resolved by cleaning. 2. Throttle Body Carbon Buildup: Carbon buildup in the throttle body can cause the engine to struggle or barely manage to drive the compressor, leading to idle vibration. The throttle body needs to be cleaned. If the driving environment is harsh, it's best to clean it regularly, recommended every 10,000 kilometers. 3. Engine Mount Collapse or Damage: The engine's balance is disrupted, and turning on the compressor may reach a resonance frequency, intensifying the vibration.
17
5
Share

Do I have to replace the tire if it gets punctured by a nail?

Generally, you don't need to replace the tire if it gets punctured by a nail. It can be repaired directly without major issues. Normally, a tire can be patched 3-5 times without problems, but it shouldn't be punctured in the same spot repeatedly, as this could create a large area of damage and pose a risk. If the tire tread is worn flat or the damage is severe, a new tire should be replaced. Below is an introduction to the functions of tires: Tires are one of the most important components of a car. Their main functions include: supporting the entire weight of the vehicle and bearing the load of the car; transmitting traction and braking torque to ensure the adhesion between the wheels and the road; reducing and absorbing vibrations and impacts during driving to prevent severe vibrations and early damage to car components; adapting to the high-speed performance of the vehicle and reducing driving noise; ensuring driving safety, handling stability, comfort, and fuel efficiency.
9
1
Share

How to Use Cruise Control Function?

Cruise control usage is divided into five steps. Below is an introduction to cruise control usage: 1. Press the power button to activate the system, at which point the cruise control indicator light on the dashboard will illuminate. 2. Accelerate to over 40km/h, then press the SET button. At this point, release the accelerator with your right foot, and the speed will be set at the current velocity. 3. Press the RES (+) button to increase speed from the current setting, or press the SET (-) button to decrease speed from the current setting. 4. There are three ways to deactivate cruise control: stepping on the brake, pressing the CANCEL button, or pressing the power button. 5. If cruise control is canceled by stepping on the brake or pressing the cancel button, you can press the RES button to resume the previously set cruise control speed.
3
1
Share

What is the top speed of the 2012 Skoda Fabia?

The top speed of the 2012 Skoda Fabia is 175km/h. Below is an introduction related to top speed: Factors affecting top speed: There are many factors that affect a car's top speed, such as the power of the car's engine, the engine's maximum torque, the speed at maximum torque, the transmission ratio of the drivetrain, and driving resistance. The resistance mainly refers to air resistance and rolling resistance. Top speed of common car models: The top speed of general small cars is about 180km/h, mid-to-high-end cars can reach 250km/h, and imported sports cars can have a maximum speed of 280km-300km/h.
9
3
Share

What are the causes of glass breakage?

Glass is formed by melting silicon dioxide and other chemical substances together (the main production raw materials are: soda ash, limestone, quartz). There are 4 main reasons that cause glass breakage: 1. Glass damage leading to breakage: Scratches, surface corrosion, or chipped edges on the glass surface or edges due to careless handling, installation, or maintenance can easily disrupt the stress balance of the glass, triggering spontaneous breakage of tempered glass. 2. Breakage during installation: During the installation process, if the installation gap is too small or the glass directly contacts the frame, the different expansion coefficients of glass and frame under sunlight can generate compressive forces on the edges or corners of the glass, inducing breakage. 3. Breakage caused by glass processing: Glass with drilled holes or cut corners is prone to breakage. 4. Natural environmental factors causing glass breakage: Wind disasters such as strong typhoons can lead to the failure of wind pressure resistance design, resulting in glass breakage.
20
4
Share

How to Refurbish Car Headlights?

Car headlights can be refurbished through polishing, which is the most commonly used method in car detailing shops. This repair method is fast, convenient, and effective for refurbishment, with low costs. Since the headlight surface is generally made of plastic rather than paint, the light transmittance decreases when the wax component on the surface wears off. The specific steps are as follows: 1. Clean the dust and dirt on the headlight surface. 2. Use tape to cover and protect the areas around the headlight that do not require refurbishment. 3. Sand the surface with water sandpaper. 4. After sanding, remove the powder, then use a towel dipped in polishing wax to polish in a circular motion.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.