What to Do If Something Falls into the Windshield Gap?

1 Answers
OKatherine
07/29/25 2:21pm
There are four main solutions for removing objects that fall into the windshield gap. Below is a detailed introduction to these four methods: 1. Use a ruler to stick out the foreign object: Wrap adhesive tape (or a sticky substance like chewing gum) around the front of the ruler, then insert it into the gap to stick the object out. 2. Use an iron wire to hook out the foreign object: Bend the front of the iron wire into a hook and fish it out. If one wire doesn't work, try using two. 3. Visit a professional auto repair shop to dismantle the dashboard: This method must be performed at a 4S shop or a professional auto repair shop. It is not recommended to go to a 4S shop because they may charge disassembly fees (labor costs). 4. If the object is not valuable, you can ignore it. Foreign objects will not affect the car's performance, driving, safety, or any other aspect.
Was this review help?
9
0
Share
More Forum Discussions

Is the Porsche Cayenne's Engine Made by Volkswagen?

Porsche Cayenne's engine is indeed part of the Volkswagen Group and is manufactured at Porsche's factory in Stuttgart. The Porsche Cayenne 3.0T engine model is CTM, with a maximum power output of 250kW and a maximum torque of 450Nm. The 2.9T engine model is EA839, delivering a maximum power of 324kW and a maximum torque of 550Nm. The 4.0T engine model is DCU, boasting a maximum power of 471kW and a maximum torque of 850Nm. For daily maintenance of the Porsche Cayenne's engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the selection standard meets or exceeds the manufacturer's requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an adequate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal contamination. Periodically clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger quantities precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates smoothly but also extends the lifespan of both the radiator and the engine.
15
1
Share

Can the wheel rims of the Haval F7x be enlarged?

Haval F7x wheel rims can be enlarged, here is the relevant information: 1. Advantages: After enlarging and widening the wheels, the contact area between the car and the ground increases. While gaining greater traction and enhancing driving stability, it may slightly reduce the handling performance during emergency lane changes or turns. 2. Introduction: The first generation consists of double-row angular contact bearings. The second generation has a flange on the outer race for fixing the bearing, allowing the bearing to be simply slipped onto the wheel axle and secured with a nut. The third-generation wheel hub bearing unit integrates the bearing unit with the anti-lock braking system. The wheel hub unit is designed with inner and outer flanges, where the inner flange is bolted to the drive shaft, and the outer flange holds the entire bearing assembly together.
15
2
Share

What is the normal tire pressure for the Nissan Sylphy Classic?

The normal tire pressure range for the Nissan Sylphy Classic is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international standard GBT2978-2008. To check the current tire pressure of the Sylphy during daily driving, you can activate the tire pressure monitoring system. The tire pressure monitoring icon is located on the instrument display screen, which directly shows the specific values of all four tires. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear on the central tread of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heating due to excessive rolling; degrades the function of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Usually triggers an alarm when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the indicator light to come on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, replacement with a new part is the only solution.
20
3
Share

What Does the Exclamation Mark in a Passat Mean?

When an exclamation mark appears on the car dashboard, there are five possible scenarios: general fault, automatic transmission fault, braking system fault, abnormal tire pressure, and lighting fault. Below is a detailed analysis of these five situations: General Fault: A triangle with an exclamation mark inside indicates a general performance or component malfunction. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for diagnosis and repair to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission issue or low transmission fluid level. The transmission fluid should be replaced promptly. Braking System Fault: An exclamation mark inside a circle with parentheses represents a braking system warning, typically indicating a braking system malfunction or low brake fluid level. Immediate inspection and repair of the braking system are necessary to avoid accidents. Abnormal Tire Pressure: An exclamation mark with a horizontal line below parentheses is the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lighting system. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
5
2
Share

What brand is the engine of Dongfeng Fengshen Yixuan?

Dongfeng Fengshen Yixuan is equipped with a turbocharged engine independently developed by Dongfeng Fengshen, which is a domestically produced engine. The engine model of Dongfeng Fengshen Yixuan is DFMA15T, with a maximum horsepower of 150, a maximum power of 110kw, a maximum power speed of 5500rpm, and a maximum torque of 230N.m. For the daily maintenance of Dongfeng Fengshen Yixuan's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust system and the conditions of use; for diesel engines, CB_CD grade diesel engine oil should be selected according to the mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance will deteriorate, causing various problems for the engine. To avoid failures, the oil should be changed regularly according to the conditions of use, and the oil quantity should be moderate. When the engine oil passes through the fine holes of the filter, the solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element will burst or the safety valve will open, allowing the oil to pass through the bypass valve, still bringing dirt back to the lubrication part, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder produced by part wear to form sludge. When the amount is small, it is suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale can not only ensure the normal operation of the engine but also extend the overall lifespan of the radiator and the engine.
8
4
Share

What is the fuel tank capacity of the Tiida?

The fuel tank capacity of the Tiida is 52 liters. Below is relevant information: 1. Basic information: The Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company. The dimensions of the Tiida are 4393mm in length, 1766mm in width, and 1539mm in height, with a wheelbase of 2700mm. It features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. 2. Powertrain: The Tiida is equipped with a 1.6L naturally aspirated engine, paired with a 5-speed manual transmission. This engine delivers a maximum power of 90kW and a maximum torque of 155Nm. The engine also incorporates multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.