···
Log in / Register

What to Do If It Rains During the Subject Two Driving Test?

1Answers
LeAlex
07/24/2025, 03:54:22 PM

Here are the solutions for dealing with rain during the Subject Two driving test: 1. Wipe the rearview mirrors (side mirrors) clean before getting in the car. During the test, you are not allowed to stick your head out, and once the seatbelt is fastened, you won’t be able to reach out to wipe the mirrors. 2. Do not close the car windows too tightly, as this can cause fogging inside the car, which may obstruct your vision. 3. Turn on the windshield wipers promptly and adjust their speed according to the intensity of the rain to ensure clear visibility. 4. Control your speed carefully; it’s best to drive slightly slower than usual (safety first). 5. Shake off any mud or water from the soles of your shoes before getting in the car to prevent slipping. During the test, avoid sudden acceleration or braking, as the road is slippery in the rain, which can easily cause the wheels to skid. Stay calm and operate the vehicle with caution.

Was this review help?
109
Share
More Q&A

The Relationship Between Engine Compression Ratio and Gasoline Octane Rating

Compression Ratio and Gasoline Octane Rating are related as follows: 1. The engine compression ratio is the most important parameter in determining the appropriate gasoline octane rating. 2. There is no strict standard specifying which octane rating should be used for a particular compression ratio. With the widespread application of knock sensors and automatic ignition timing adjustment technology, vehicles with high compression ratios can also use lower octane gasoline. 3. Extension: In international automotive industry practice, the following fuel standards are widely adopted: 90 Octane Gasoline – Suitable for gasoline vehicles with engine compression ratios below 8.5. 92 Octane Gasoline – Suitable for gasoline vehicles with engine compression ratios between 8.6 9.9. 95 Octane Gasoline – Suitable for gasoline vehicles with engine compression ratios between 10.0 11.5. 98 Octane Gasoline – Suitable for gasoline vehicles with engine compression ratios above 11.6.
103
Share

How to Connect Bluetooth to Play Music in Tiguan?

The method to connect Bluetooth for playing music in Tiguan is: 1. Turn on the Bluetooth on your phone and set it to be discoverable by nearby devices; 2. Turn on the car's Bluetooth and set it to be discoverable by nearby devices; 3. After connecting Bluetooth, select Bluetooth as the audio source. Notes include: 1. The degree of control the infotainment system has over the Bluetooth audio source depends on the connected Bluetooth audio source; 2. To avoid interference noise and functional failure, turn off warning tones and message tones on the connected Bluetooth audio source, such as turning off key tones on mobile phones; 3. If an external media player is connected to the infotainment system simultaneously via Bluetooth and USB interface, the Bluetooth audio connection will automatically disconnect. The Tiguan is a car produced by Shanghai Volkswagen, positioned as a compact SUV, equipped with Volkswagen's flagship 1.8TSI and 2.0TSI engines, paired with a 6-speed manual transmission and an Aisin 6-speed automatic transmission.
104
Share

Difference Between BYDM DM and DMi?

BYDM DM and DMi differ in the following aspects: 1. BYDM DM is equipped with a 2.0T engine, delivering a maximum power of 192 horsepower (141KW) and maximum torque of 320Nm; BYDM DMi features a smaller 1.5T engine, producing a maximum power of 139 horsepower (102KW) and maximum torque of 231Nm. 2. BYDM DM comes with a traditional 6-speed wet dual-clutch transmission; BYDM DMi utilizes an E-CVT continuously variable transmission. 3. All BYDM DMi models have a front-mounted single motor, available in 145kw and 160kw versions; BYDM DM, besides offering a rear-mounted single motor variant with 180kw, also includes two dual-motor models with front + rear motor configurations.
109
Share

What Causes the Ford EcoSport to Fail to Detect the Key?

Ford EcoSport's inability to detect the key may be caused by loose fuses or relays, or it could be due to a dead battery. Below are the reasons for key detection failure: 1. Dead key battery: If the key's battery is dead, the door cannot be opened, and replacing the battery will resolve the issue. 2. Dead car battery: If the car's battery is dead, the sensors in the car will not have power, making it impossible to detect the key. 3. Faulty sensor module: There might be an issue with the key's sensor or the sensor module itself. Additional information: The car's smart key is a common keyless entry system, also known as the smart key system. It consists of a transmitter, a remote central locking control module, a driving authorization system control module, three receivers, and the related wiring harnesses that form the control system.
120
Share

Which Area of the Tire Cannot Be Repaired?

The sidewall of the tire cannot be repaired. Below are some precautions for car tires: 1. Pay attention to tire pressure: Pressure is the lifeline of a tire. Both excessive and insufficient pressure will shorten its lifespan. Insufficient pressure increases tire body deformation, leading to cracks on the sidewalls and causing flexing movements, which generate excessive heat, accelerating rubber aging, fabric layer fatigue, and cord breakage. Insufficient pressure also increases the tire's contact area with the ground, accelerating shoulder wear. Excessive pressure overextends the tire cords, reducing the tire body's elasticity and increasing the load on the car during driving. In case of impact, this can cause internal cracks and blowouts. Additionally, excessive pressure accelerates tread wear and reduces puncture resistance. 2. Regularly check front wheel alignment: Front wheel alignment significantly affects tire lifespan, with toe-in and camber being the main factors. Excessive camber mainly accelerates shoulder wear (uneven wear), while incorrect toe-in (either too little or too much) primarily accelerates wear on the inner and outer sides of the tire.
101
Share

How to Start a New Energy Vehicle?

First of all, although pure electric vehicles do not have a gearbox, they still have a gear switch. To start, first press the brake pedal to power on, then press the start button, rotate the gear to D, release the handbrake, and gently press the accelerator pedal (more accurately, the power pedal) to complete the start. More details are as follows: 1. When you want to park, release the power pedal, press the brake, and after the car stops, rotate the gear to N, then directly pull up the handbrake (for those with an electronic handbrake, lift the button upward), and finally press the shutdown button to finish (like the Tesla Model-s, which automatically powers off after pulling up the electronic handbrake). 2. For pure electric vehicles, the core powertrain consists only of the motor and battery, with a relatively simple structure and low technical barriers, resulting in a relatively large number of models. Considering market sales and user reputation, the currently reliable pure electric vehicle brands include Tesla, BYD, Denza, BAIC New Energy, Geely, and JAC.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.