What to Do If It Rains During the Subject 2 Driving Test?

1 Answers
EmersynAnn
07/25/25 12:32am
If it rains during the Subject 2 test, calmly adjust your mindset and respond appropriately. Below are some tips for the Subject 2 test: 1. Clutch Control: Mastering clutch control is essential in the Subject 2 test. During the test, maintain a slow and steady speed by flexibly adjusting the clutch. When turning the steering wheel one and a half turns, slightly release the clutch to avoid stalling. When straightening the steering wheel, press the clutch slightly to prevent sudden acceleration, which could disrupt normal driving. Always operate the clutch gently, lifting and pressing it slowly. 2. Avoid Stopping Midway: It's best to maintain a steady speed during the Subject 2 test. The clutch is equipped with sensors, so avoid releasing it too quickly during startup, as this might be mistaken for stopping midway. After starting, control the speed carefully to avoid stopping. If the vehicle stops without fully pressing the brake, it may affect your test score. 3. Start with Brake to Prevent Rolling Back: During the Subject 2 test, rolling back may occur when starting on a slope. To prevent this, start with the brake engaged. Release the clutch to the critical point before releasing the brake. Slowly lift the clutch until the car body slightly vibrates, then release the brake. 4. Don’t Panic If the Engine Stalls: If the engine stalls during the test, stay calm. Shift to neutral and restart the engine. When on a slope, remember to press the brake. Stalling deducts 10 points, and repeated stalling during startup may lead to failing the test.
Was this review help?
5
3
Share
More Forum Discussions

What is the ground clearance of the Cadillac CT6?

The ground clearance of the Cadillac CT6 is 15cm, which ensures good comfort and handling. Taking the 2020 Cadillac CT6 as an example, it is equipped with a 2.0T inline 4-cylinder turbocharged engine, with a maximum horsepower of 237ps, a maximum torque of 350nm, and a maximum power of 174kw. It is paired with a 10-speed automatic transmission. The Cadillac CT6 is a sedan with body dimensions of 5179mm in length, 1879mm in width, 1500mm in height, a wheelbase of 3109mm, a minimum ground clearance of 162mm, and a body weight of 2000kg.
20
0
Share

What is the solution for car shock absorber oil leakage?

Car shock absorber oil leakage can be addressed by: 1. Tightening the oil cylinder cover nut; 2. Replacing the sealing components or the shock absorber. The causes of car shock absorber oil leakage are: 1. Poor internal cleanliness of the shock absorber, with welding slag or iron filings causing oil seal wear; 2. Harsh working conditions of the shock absorber, allowing external sand and debris to enter the oil seal, leading to wear and oil leakage; 3. Aging of the shock absorber oil seal's sealing lip, resulting in loss of sealing function; 4. Failure to properly cover the shock absorber during undercoating, causing the coating to adhere to the shock absorber piston rod; 5. Damage to the control rod that regulates piston movement. Types of car shock absorbers include hydraulic and pneumatic.
17
4
Share

What car has a five-pointed star in front?

The car with a five-pointed star in front is the Dongfeng Venucia. The logo of Dongfeng Venucia features a blue background, symbolizing profound dreams. Dongfeng Venucia is an independent brand established by the Dongfeng Motor Group and utilizes Nissan technology. The Morning Star is the origin of Dongfeng Venucia. Taking the 2020 Venucia D60 as an example: its body structure is a 4-door, 5-seater sedan with dimensions of 4756mm in length, 1803mm in width, and 1487mm in height, with a wheelbase of 2700mm. The 2020 Venucia D60 has a MacPherson strut front suspension and a torsion beam rear suspension.
19
2
Share

How to manually turn off the engine malfunction indicator light?

Manual steps to turn off the engine malfunction indicator light are as follows: 1. Determine whether it's a false alarm or real malfunction: (1) False alarm: The most common scenario is insufficient vehicle battery power, causing signal confusion in the sensor system due to power shortage, which triggers the warning. (2) Real malfunction: Based on computer diagnostic information and further inspection, it's found that the engine has some behavior that doesn't affect normal driving, or the fuel injector and ignition coil are damaged, triggering the warning. 2. Resolve the issue: (1) False alarm: Ensure the vehicle has sufficient battery power, and the warning light will disappear automatically. (2) Real malfunction: Regularly check the vehicle's sensors, fuel injector, ignition coil, and other components, and address any issues promptly.
1
2
Share

Can You Continue Driving with a Damaged Ignition Coil?

You cannot continue driving with a damaged ignition coil. The reasons are as follows: 1. Engine vibration: If the ignition coil is damaged, the spark plug cannot ignite the combustible gas mixture, which can easily cause the engine to misfire and produce severe vibrations. If too many cylinders misfire, the engine may not start normally. 2. Increased fuel consumption and reduced power: Due to the weakened sparking ability of the spark plug, the combustion of the combustible gas mixture in the engine will be affected, leading to adverse reactions such as increased fuel consumption and reduced power. 3. Excessive carbon buildup: When the spark plug's sparking ability weakens, it can also cause incomplete combustion of the combustible gas mixture. This incomplete combustion produces a substance called carbon deposits, and the vehicle's exhaust may emit black smoke.
6
4
Share

What is the installation method for the Qoros 3 alternator belt?

The installation method for the Qoros 3 alternator belt is as follows: 1. Loosen the alternator fixing screw and the belt tension adjustment screw; 2. Push the alternator towards the engine to minimize the distance between the pulleys, then place the belt in position and align it; 3. Adjust the belt tension to the appropriate level, and tighten the engine fixing screw and adjustment screw. The Qoros 3 is a compact car with the following body dimensions: length 4627mm, width 1839mm, height 1445mm, wheelbase 2702mm, minimum ground clearance 130mm, body weight 1425kg, and front-wheel drive.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.