What to Do If Driving License Points Exceed 12 Points?

2 Answers
DianaLee
09/04/25 4:40am
If the points on your driving license exceed 12 points, the following steps should be taken: 1. First, according to traffic regulations, if a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security organ shall detain their motor vehicle driving license. 2. The motor vehicle driver must, within fifteen days, attend a seven-day study session on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security organ that issued the driving license. 3. After completing the study session, the vehicle management personnel shall conduct an examination on road traffic safety laws, regulations, and related knowledge within 20 days. If the driver passes the examination, the points will be cleared.
Was this review help?
14
0
Share
StArianna
09/16/25 5:44am
I remember that time when my driver's license points exceeded 12 was quite a headache. Careless speeding accumulated to 15 points, and that's when the trouble started. The first thing I had to do was report to the local traffic police station to apply for traffic safety education courses, which lasted about seven days. All I needed to bring was my ID card and original driver's license. The course content was practical, covering traffic law explanations, accident video analyses, and emphasizing the dangers of drunk driving and fatigued driving. After passing the exam, my license points were reset, but the most valuable part was learning safe driving habits, like frequently checking the speedometer in areas with a 40 km/h limit. Delaying the process could lead to license suspension, so I attended the course promptly. Now, I pay more attention to traffic signals and maintaining safe distances to avoid repeating the mistake and wasting time on repeated procedures. This experience was a profound lesson, and checking speed limits along my route before daily trips has become routine.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What Decibel Level Indicates Good Sound Insulation in Cars?

Vehicle noise standards are below 60 decibels. Noise refers to the sound emitted by road and rail vehicles during operation. Additional information is as follows: 1. Causes of excessive car noise: carbon buildup in the engine; shock absorber malfunction; large gaps in the cabin or vehicle body; aging tires; internal damage to valve guides; cooling system failure; poor-quality engine oil; engine misfire; spark plug carbon buildup. 2. Solutions for excessive car noise: install sound-absorbing foam material under the hood to suppress vibrations caused by the hood and absorb a significant amount of noise; use damping plates combined with sound-absorbing pads to address road and tire noise; install or replace door seals; tighten screws or replace faulty components.
4
5
Share

Can the Mercedes-Benz E260 use 92 octane gasoline?

The Mercedes-Benz E260 cannot use 92 octane gasoline; it generally requires 95 or 98 octane gasoline. The meaning of gasoline octane ratings: The octane rating represents the level of octane in the gasoline—the higher the rating, the higher the octane level. Car manufacturers specify the appropriate gasoline octane rating for each vehicle in the owner's manual based on the engine's characteristics. Considerations when choosing gasoline octane ratings: Under normal circumstances, it is not recommended to use gasoline with an octane rating lower than the one specified in the vehicle's manual. Using lower-octane gasoline may cause premature combustion, leading to engine knocking. Incomplete combustion can also increase carbon deposits, potentially clogging fuel lines and injectors, resulting in fuel supply interruptions and engine stalling. Additionally, mixing different octane ratings is not advisable, as prolonged use can damage the engine, leading to issues like carbon buildup and increased fuel consumption.
18
2
Share

How to Read the Date on Used Car Glass?

Numbers represent the production year, and dots represent the month. If the dot is before the number, it indicates production in the first half of the year; if the dot is after the number, it indicates production in the second half of the year. In this representation method, the number also represents the year, the dot closest to the number represents the quarter, and the subsequent dots represent which month of that quarter.
6
4
Share

How is the quality of Shell gasoline?

Shell's gasoline quality is excellent, and Shell's fuel is more durable than Sinopec and PetroChina, with better fuel quality. Below is relevant information: 1. Introduction: Royal Dutch Shell Group, headquartered in The Hague, Netherlands, and London, UK, was formed by the merger of Royal Dutch Petroleum and the UK's Shell. It is one of the world's leading producers of oil, natural gas, and petrochemicals, as well as the largest retailer of automotive fuel and lubricants globally. 2. Scale: The Royal Dutch/Shell Group achieved outstanding performance in 1996. On one hand, due to the significant rise in crude oil prices, the group seized the opportunity to increase production and sales of crude oil and oil products; on the other hand, the group's restructuring, enhanced management, and cost reduction measures also played a crucial role.
5
2
Share

What is the original tire model for the 10th generation Accord?

The 10th generation Accord uses three different models of original tires: 225/50r17, 215/60r16, and 235/45r18. The 10th generation Accord is a mid-size sedan under Honda, equipped with three engines: a 2.0-liter naturally aspirated engine, a low-power version 1.5-liter turbocharged engine, and a high-power version 1.5-liter turbocharged engine. Taking the 2021 10th generation Accord as an example: the body dimensions are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. It has a maximum horsepower of 194, a maximum torque of 260 Nm, and a maximum power of 143 kW.
14
3
Share

How to Fine-Tune the Steering Wheel When Reversing into a Parking Space?

Based on aligning the car body, observe the distance between the car body and the parking lines on both sides in the left and right rearview mirrors. Adjust the steering wheel towards the side with a larger gap. When the rear of the car reaches the entrance of the parking space and the steering wheel is straightened, there is limited room for adjustment. At this point, observe whether the car body is tilted and the difference in distance on both sides, then begin fine-tuning left and right. For fine-tuning when reversing into the parking space, follow the principle of small adjustments, quick returns, and multiple corrections. Make quick, slight adjustments to prevent oversteering and wasting time on readjustments. Good clutch control ensures the car moves slowly and steadily, which is key to successfully reversing into the parking space. A slow but continuous speed allows time for observation and adjustment.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.