···
Log in / Register

What to Do If Caught with Excessive Emissions?

4 Answers
LaGenevieve
08/26/25 5:11am

Being caught with excessive emissions will result in a fine of up to 200 RMB and 3 penalty points for the driver. The following are the reasons that may lead to excessive emissions: 1. There are many reasons for excessive emissions, with the primary one being the use of low-quality fuel. When refueling, it is advisable to choose gas stations of well-known brands. 2. Additionally, using low-quality fuel can lead to incomplete combustion in the engine, resulting in carbon deposits. 3. Secondly, a clogged catalytic converter or a malfunctioning oxygen sensor can also contribute to excessive emissions. If you notice an unusually strong smell from the exhaust, you should have it checked and resolved promptly at a reputable repair shop.

Was this review help?
2
3
Share
Seth
09/08/25 7:08am

Last year my car failed an emissions test caught by a roadside camera, and receiving the notice was frustrating, but I took immediate action. First, I checked the vehicle's condition and found that the catalytic converter in my old car was clogged, likely due to insufficient maintenance leading to carbon buildup. I went to a repair shop to replace the part, which cost a few hundred dollars, and also had the fuel injectors and oxygen sensors cleaned. Then, I scheduled a retest at an emissions testing station, and after passing, submitted the results to waive part of the fine. Though the process was time-consuming, it made me realize the importance of regular maintenance, such as changing the oil and filters every six months to prevent issues. Ignoring these small problems can lead to higher fuel consumption, worse emissions, and even heavier fines as the car ages. Now, I've developed a habit of timely maintenance and also advise friends to prevent issues at the source.

Was this review help?
19
3
Share
Expand All
CarterAnn
10/22/25 7:13am

I drive frequently, and last week my vehicle was flagged for excessive emissions, which gave me quite a scare. After checking the notice, I found out I needed to go to a designated location to address the issue. I immediately drove to a nearby auto repair shop for inspection. The mechanic suggested that it might be due to accumulated dust in the fuel system or a faulty sensor. After a simple cleaning and replacing a few small parts, I avoided further trouble. Later, I went to the emissions center for a recheck, passed on the first try, and submitted the record to clear the citation. This experience reminded me not to delay maintenance for older vehicles and to use higher-quality fuel, which is more effective and helps avoid embarrassing roadside monitoring captures. From now on, I’ll check my car’s condition monthly—after all, fines are minor compared to safety risks. A car is like the body; neglecting it will eventually lead to problems. Don’t wait until you’re caught to take action—prevention is much simpler than treatment.

Was this review help?
20
5
Share
Expand All
SanAnastasia
12/05/25 7:37am

Two years ago, my car's exhaust emission exceeded the standard and was caught on camera, resulting in an immediate fine. I went straight to a repair shop for an expert inspection, which revealed that an aging oxygen sensor was causing inaccurate readings. Replacing the part cost just over 100 yuan, and the re-inspection showed the emissions were back within limits. The whole process was quick and hassle-free, but the key lies in regular maintenance: cleaning filters or checking the system can significantly reduce the risk of exceeding standards. Ignoring the issue after being caught could affect your next annual inspection. Now, I regularly check my car's condition and maintain good habits to avoid trouble.

Was this review help?
20
4
Share
Expand All
More Forum Discussions

Why is the steering wheel of a small car so heavy?

Reasons for a heavy steering wheel in small cars: 1. Lack or deterioration of power steering fluid; 2. Severe wear or insufficient lubrication in the steering system; 3. Malfunction of steering system components; 4. Incorrect front wheel toe-in parameter; 5. Low tire pressure. Solutions for a heavy steering wheel in small cars: 1. Perform timely maintenance; 2. Add or replace power steering fluid. Maintenance methods for small car steering wheels: 1. Avoid turning the steering wheel to its limit when making turns; 2. Install a leather steering wheel cover; 3. Reduce excessive force when turning the steering wheel; 4. Develop good steering wheel usage habits. Working principle of small car steering wheels: Converts circular motion into linear motion through a rack and pinion mechanism, thereby pushing the wheels to rotate.
12
2
Share

Where is the fuel filler switch located on the Beidou Star?

The fuel filler cap switch of the Beidou Star is located under the driver's seat. Simply pull the switch to open the fuel filler cap. The Beidou Star's instrument panel design is straightforward, not particularly fashionable but not outdated either. The speedometer, tachometer, and fuel gauge are neatly arranged, making them clear and easy to read. The 4-spoke steering wheel offers good tactile feedback, and there is no interference with observing the instrument indicators while driving. Here are some additional details: Interior features: The layout of various function buttons inside the car is also very reasonable, with no inconvenience felt. Due to the Beidou Star's tall body, it provides ample seating space, but the trade-off is an increased drag coefficient, which affects the vehicle's power and fuel economy. However, the Beidou Star's K10A engine does not seem to be significantly affected by this.
6
1
Share

What is the function of a hammer drill clutch?

The function of a hammer drill clutch is to protect the user's safety. When encountering rebar during drilling, it prevents reverse rotation that could cause injury. The clutch serves as a safety protection mechanism. More details about the hammer drill clutch are as follows: 1. Introduction: A hammer drill is a commonly used power tool. With the development of the power tool industry, the requirements for its functions have become increasingly higher. 2. Principle: The principle of a hammer drill involves the transmission mechanism driving the drill bit to perform a rotational motion while also generating a reciprocating hammering motion perpendicular to the rotation. The hammer drill operates by the transmission mechanism driving a piston to reciprocate and compress air within a cylinder. The periodic changes in air pressure inside the cylinder drive a hammer inside the cylinder to reciprocate and strike the top of the drill bit, hence the name 'hammer drill'.
15
3
Share

Why can't Audi MMI connect to WLAN?

Audi MMI cannot connect to WLAN for the following reasons: 1. Poor network signal, unable to connect normally; 2. Incorrect connection method, resulting in connection failure; 3. The WLAN mode in the car is turned off. Audi is a German car brand. Taking the Audi A6L as an example, the Audi A6L is a mid-to-large-sized car with exterior dimensions of 5,380 mm in length, 1,886 mm in width, and 1,475 mm in height. The Audi A6L is equipped with a 2.0T 190-horsepower L4 engine, with a maximum power of 140 kW and a maximum power speed of 4,200 to 6,000 rpm, a maximum torque of 320 Nm, and a maximum torque speed of 1,450 to 4,200 rpm.
10
5
Share

Where is the fuel pump fuse located in the Beidou Star?

The fuel pump relay of the Beidou Star is located on the left side of the engine compartment. On the left side, there are the compressor relay, fuel pump relay, main relay, and radiator fan relay. The main functions of the fuel pump relay include amplification, allowing a very small current to control a high-power circuit, and expanding the control range. Here is additional information: Precautions: Because relays are precision components, if they are dropped or subjected to significant impact, they should not be used again. Do not use relays in environments with dust, SO2, H2S, or other organic gases. If the relay has a housing, it usually cannot be removed. To maintain initial performance, do not remove the housing to avoid losing its characteristics. Ensure that the operating environment temperature does not exceed the environmental temperature specified in the relay model specifications.
6
3
Share

What Causes the Clutch Failure in a Baojun Manual Transmission?

Manual transmission shift cable failure can affect normal gear shifting. Before the shift cable breaks, symptoms may include difficulty when pressing the clutch, difficulty engaging gears, or inability to fully engage a gear. If the shift cable head detaches from the gear head or the clutch cable breaks, it can result in the inability to shift gears. Below are precautions when operating the clutch: 1. Semi-engaged state: The clutch disc experiences abnormal wear in this state, so minimize the duration of semi-engagement. 2. Proper cooling: When frequent semi-engagement is necessary, use a pattern of "semi-engagement – disengagement – semi-engagement – disengagement" to ensure adequate cooling of the clutch disc. 3. Increased wear: Maintain good driving habits by removing your left foot from the pedal when not using the clutch. Keeping your foot on the pedal may unintentionally keep the clutch semi-engaged, accelerating clutch disc wear. 4. Diagnosis: Regular maintenance of the clutch disc is essential. If significant changes in pedal feel or gear shifting are noticed, promptly consult a technician for diagnosis.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.