What to Do If Car Paint Is Scratched Off?

1 Answers
McJade
07/28/25 7:07pm
The solution for scratched-off car paint is: grind off the paint from the affected area, then perform sheet metal repair, and reapply the various layers of paint. The method for painting is: 1. Clean the car thoroughly; 2. Sand the car surface with 600-grit sandpaper until it feels rough, which helps the paint adhere and prevents it from peeling easily; 3. When spraying paint, hold the spray nozzle about 20 cm away from the car and spray evenly, applying multiple coats; 4. Maintain a 10-minute interval between each coat to allow the paint to dry and avoid sagging; 5. If sagging occurs, let it dry completely, then sand it with 600-grit sandpaper until smooth, and spray paint from a distance to cover it; 6. Once the paint is completely dry, apply a layer of clear coat to enhance brightness, protect the paint surface, and make the paint more wear-resistant.
Was this review help?
15
2
Share
More Forum Discussions

Where are Deutz engines produced?

Deutz engines are produced in Germany. The company headquarters is located in Cologne, Germany, on the banks of the Rhine River. For many years, it has been renowned worldwide for its flagship product, the Deutz brand diesel engines. The French Deutz engine company's natural gas vehicle engine production facility is situated in Mannheim. Introduction to the Deutz DCA498T3 engine: This is an automotive engine with a total weight of 265 kg, a displacement of 3.168 liters, and a maximum power output ranging from 36 to 74.9 kW. It meets the non-road China III emission standards. This engine retains the basic structure of the 498 model series and is equipped with an electronically controlled high-pressure single-pump fuel injection system. The product has a long service life and is widely used in industrial vehicles, agricultural machinery, and diesel generator applications. Introduction to diesel engines: A diesel engine is an internal combustion engine that burns diesel fuel to release energy. The advantages of diesel engines include high torque output and excellent fuel economy. The working process of a diesel engine shares many similarities with gasoline engines, with each operating cycle also going through four strokes: intake, compression, power, and exhaust. However, since diesel fuel has higher viscosity and lower volatility compared to gasoline, and its autoignition temperature is lower than gasoline's, the formation of combustible mixture and ignition methods differ significantly from gasoline engines.
18
5
Share

What is the normal range for tire pressure on highways?

According to the international GBT2978-2008 standard, the recommended tire pressure for standard tires when driving on highways is 2.4-2.5 bar, while reinforced tires should be inflated to 2.8-2.9 bar. The maximum tire pressure should not exceed 3.5 bar. The hazards of over-inflated tires are as follows: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear of the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving; decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, and impacts can cause internal cracks and blowouts, leading to tire bursts. The hazards of under-inflated tires are as follows: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, creating unsafe driving conditions; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the function of cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in tire bursts; increases tire deformation, making the sidewalls prone to cracks and generating flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area with the ground, accelerating shoulder wear.
10
0
Share

How to adjust the time on the car dashboard?

The method to adjust the time on the car dashboard is: 1. Start the vehicle, the clk button can display and set the time. Press and hold the clk button for about 5 seconds until the time display starts flashing; 2. Use the adjustment buttons—turn left to decrease and right to increase—to set the hour and minute separately using the respective keys; 3. After adjusting the time, press the clk button again to confirm. The car dashboard is a device that reflects the working conditions of various vehicle systems. It consists of the coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear indicator, ABS (Anti-lock Braking System) indicator, traction control indicator, and airbag warning light.
19
3
Share

Where is the OBD connector of Citroen C5 located?

The OBD connector of Citroen C5 is located inside the center console near the gear lever. OBD is the On-Board Diagnostics system, and its functions are: 1. To locate and describe faults in specific parts or components for easier maintenance; 2. To alert when faults cause excessive emissions, indicating increased environmental impact from pollutants. OBD includes: 1. EGR; 2. Engine; 3. Particulate filter; 4. Catalytic converter; 5. Oxygen sensor; 6. Emission control system; 7. Fuel system. The working principle of OBD is: when an emission fault occurs, the ECU records the fault information and related codes, and informs the driver through the malfunction indicator light or check engine light.
13
1
Share

What is the correct parking sequence for an automatic transmission with an electronic parking brake?

Automatic transmission with electronic parking brake correct parking sequence is: 1. Shift the gear lever to N position after parking; 2. Pull the electronic parking brake once; 3. Shift the gear lever to P position and turn off the engine. The electronic parking brake, also known as the electronic parking brake system, integrates the temporary braking function during driving with the long-term parking braking function, and realizes the parking braking technology through electronic control. The working principle of the electronic parking brake is the same as that of the mechanical handbrake, both of which achieve parking braking control through the friction generated between the brake disc and the brake pads, but the control method has changed from the previous mechanical handbrake lever to an electronic button.
4
3
Share

How to Open the Fuse Box on a Ford Kuga?

The method to open the fuse box on a Ford Kuga is as follows: 1. Open the driver's door; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Lift the engine hood upwards and secure it with the support rod; 4. Locate the black box next to the left-side battery, which is the fuse box, and press firmly to open it. Taking the 2019 Ford Kuga as an example, it belongs to the compact SUV category with body dimensions of: length 4525mm, width 1838mm, height 1685mm, and a wheelbase of 2690mm. The 2019 Ford Kuga is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 182PS, maximum power of 134kW, maximum torque of 245Nm, and is paired with a 6-speed automatic transmission.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.