What to Do If Bird Droppings Corrode the Car Paint?

2 Answers
LeKaden
07/24/25 5:09am
The solutions for bird droppings corroding the car paint: 1. If there are only stains, first wash the car body with clean water to soften the bird droppings, then place a wet towel over the area to further soften it. After that, use car wash liquid and a towel to wipe the stained area until it is completely clean; 2. If the corrosion has been present for a long time, causing the paint to oxidize, turn yellow, or crack, it is necessary to go to a beauty service shop for waxing or touch-up paint treatment. If bird droppings on the car are not cleaned for a long time, they can easily leave a hard-to-remove stain or even directly eat away a piece of paint. Therefore, before using the car, it is advisable to check if there are any bird droppings on the car paint.
Was this review help?
15
1
Share
DiCharlie
08/11/25 12:49am
I've been handling car cleaning myself for years, and dealing with bird droppings corroding the car paint is quite simple. Bird droppings are highly acidic, and if not removed promptly, they can eat into the paint and create pits. The first step is to immediately apply a wet cloth or water to soften it for 5 minutes upon discovery—don’t scrape it hard to avoid leaving marks. Then, use a neutral car wash detergent, like diluted dish soap, to wipe it off gently to prevent scratching the paint. Rinse thoroughly with clean water afterward and finish with a layer of wax for protection. If the corrosion is deep, you’ll need to take it to a shop for polishing and repair—don’t delay because sun exposure will worsen the damage. It’s advisable to park in the shade or use a car cover regularly. During seasons with heavy bird droppings, wash your car twice a week to maintain a clean paint surface and prevent issues. In short, act early to avoid regrets and keep your car’s appearance well-protected.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

How to Bleed the Radiator of a Cruze?

The method to bleed the radiator of a Cruze: Open the engine hood of the Cruze and unscrew the cap of its small coolant reservoir to release air. The Cruze is a compact car under SAIC-GM Chevrolet. Taking the 2018 Cruze Dual Clutch Shine Edition as an example, its body dimensions are: length 4666mm, width 1807mm, height 1460mm, with a wheelbase of 2700mm, a fuel tank capacity of 52 liters, and a body structure of a 4-door 5-seater sedan. The 2018 Cruze Dual Clutch Shine Edition is equipped with a 1.4T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 150 hp and a maximum power of 110 kW.
14
4
Share

Is Wheel Balancing Necessary When Rotating Front and Rear Tires?

Wheel balancing is required when rotating front and rear tires, otherwise it may cause wheel wobbling or steering wheel vibration during driving. Generally, if the tire rotation is performed at a 4S dealership, they will require wheel balancing to ensure service quality. Wheel balancing is needed under the following circumstances: 1. After installing new tires or post-collision repair. 2. When experiencing unilateral wear on front or rear tires. 3. When the steering wheel feels excessively heavy or exhibits floating/shaking during driving. 4. When the vehicle tends to pull to the left or right while driving straight. 5. Even without these symptoms, it's recommended to perform wheel balancing for new vehicles after 3 months of driving, and subsequently every six months or 10,000 kilometers.
17
4
Share

What Causes Loud Noise When Pressing the Accelerator?

The reasons for loud noise when pressing the accelerator are: 1. Excessive engine oil; 2. Incorrect engine oil type; 3. Engine overheating leading to loss of power; 4. Internal engine issues. The accelerator, also known as the throttle, is a control device that regulates the engine's power output by adjusting the carburetor's throttle opening to control the cylinder's filling volume, thereby determining the engine's power output. Precautions when pressing the accelerator include: 1. Press and release the accelerator pedal gently, ensuring smooth and gradual movements; 2. Coordinate the clutch release with accelerator pressing for swift action; 3. Select appropriate gear to keep the engine running mostly at medium speed and larger throttle opening for fuel efficiency; 4. Before stopping or turning off the engine, release the accelerator pedal first and avoid sudden revving in neutral.
8
3
Share

What city does the license plate 'Hei M' belong to?

Hei M is the license plate for Suihua City in Heilongjiang Province. The license plate codes for Heilongjiang Province include: Hei A for Harbin, Hei B for Qiqihar, Hei C for Mudanjiang, Hei D for Jiamusi, Hei E for Daqing, Hei F for Yichun, Hei G for Jixi, Hei H for Hegang, Hei J for Shuangyashan, and Hei K for Qitaihe. A license plate, also known as a vehicle registration plate, is a plate attached to the front and rear of a vehicle. It is typically made of aluminum, sheet iron, plastic, or paper, and displays the vehicle's registration number, registration region, and other relevant information. Its purpose is to identify the region to which the vehicle belongs.
14
2
Share

Does Wheel Modification Affect Vehicle Inspection?

Wheel modification affects vehicle inspection. The functions of wheels are: 1. Transmitting driving force, braking force, and steering force through tires to achieve vehicle operation; 2. Supporting vehicle load; 3. Reducing and absorbing vibrations and impact forces during driving, avoiding severe vibrations that may damage vehicle components. Vehicle inspection items include: 1. Checking whether the engine, chassis, body, and their accessories are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether major assemblies have been replaced, and whether they match the initial inspection records; 2. Verifying whether the vehicle's braking performance, lighting, exhaust, and other safety features meet the requirements of relevant regulations; 3. Checking whether the vehicle has undergone modifications, alterations, or transformations, and whether the registration details on the driving license, license plate, and vehicle records match the actual condition of the vehicle; 4. Inspecting whether the license plate, driving license, and enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether they need replacement.
13
4
Share

How to turn off the automatic headlights on the Avalon?

The automatic headlights on the Avalon are controlled by a button. Press the headlight button to turn them off, and press it again to turn them back on. The Avalon is a mid-size sedan under Toyota, with body dimensions of 4978mm in length, 1849mm in width, and 1435mm in height, and a wheelbase of 2870mm. The Avalon is equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. The 2.0-liter naturally aspirated engine delivers a maximum horsepower of 178 hp and a maximum torque of 210 Nm, with a maximum power speed of 6600 rpm and a maximum torque speed ranging from 4400 to 5200 rpm. The 2.5-liter naturally aspirated engine produces a maximum horsepower of 209 hp and a maximum torque of 250 Nm, with a maximum power speed of 6600 rpm and a maximum torque speed of 5000 rpm.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.