What to Do If All 12 Points of a C1 Driver's License Are Deducted?

1 Answers
JulianFitz
07/25/25 2:44am
Drivers need to go to the traffic management department of the public security authority at the location of the violation to undergo a 7-day training program on road traffic safety laws and related knowledge, with 8 hours of instruction per day. After completing the training, they must pass the subject one exam to have their license points reset to zero. Below are the penalties for point deductions on a C1 driver's license: 1. If the license accumulates 11 points or fewer within a cycle, there is no significant impact on the driver. As long as the driver settles the violation records, the license points will reset to 12 in the next cycle. However, unpaid fines will carry over the points to the next cycle. 2. If the license accumulates 12 to 23 points within a cycle, the driver must attend the aforementioned 7-day training and pass the subject one exam to reset the points. 3. If the license accumulates 12 points or more twice within a cycle, the driver must not only complete the subject one training and exam but also retake the subject three training and exam. Only after passing both can the driver regain their license. 4. The probation period for a driver's license is one year. If a probationary driver accumulates 12 points, their license will be directly revoked.
Was this review help?
8
0
Share
More Forum Discussions

What are the possible reasons for severe vibration in the Teana?

Severe vibration in the Teana is likely caused by the following reasons. Severe engine carbon deposits: The most common cause of car vibration is excessive dirt in the throttle body or carbon buildup in the fuel injectors. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits. Engine misfire: Engine misfire mainly refers to one or more cylinders not working properly, manifested as obvious intermittent exhaust gas flow and severe shaking of the exhaust pipe, with noticeable engine vibration. Inconsistent air-fuel mixture: When the engine's air-fuel mixture is sometimes lean and sometimes rich, it causes idle vibration after a cold start. The lower the temperature, the more fuel is required for a cold start.
19
5
Share

How to Use the Remote Start Function of the Honda Avancier?

To remotely start the Honda Avancier, first press the lock button, then press the button with the circular arrow symbol to activate the engine. The steps for using the remote start function on the Honda Avancier are as follows: 1. On the multimedia information screen, navigate to Vehicle > Smart Key System Settings > Remote Start System On/Off. 2. When using remote start, the exterior lights will flash as a signal, and the engine will idle for 10 minutes. If the brake pedal is not pressed and the ignition switch is not activated within this time, the engine will shut off. 3. Performing the remote start operation again within the 10-minute window can extend the idle time by another 10 minutes. Upon successful extension, the exterior lights will flash 6 times as a notification.
12
0
Share

What is metallic car paint?

Metallic car paint refers to an automotive coating formulated with metal powders such as copper or aluminum as pigments. This type of paint incorporates metallic particles into the paint mixture, giving the painted panel surface a sparkling appearance. Under different viewing angles, the refraction of light causes variations in the vehicle's color and contours. Methods for maintaining automotive paint include: 1. Promptly remove dust from the vehicle body to minimize static electricity's attraction of dust; 2. Rinse rain stains with clean water as soon as possible after rainfall to prevent paint damage; 3. Avoid washing the vehicle under direct sunlight or high temperatures; 4. Use clean, soft cloths or sponges when cleaning to prevent mixing in metal shavings or sand particles that could leave scratches.
8
3
Share

What are the body dimensions of the BMW 3 Series?

The body dimensions of the BMW 3 Series are: length 4719mm, width 1827mm, height 1459mm, with a wheelbase of 2851mm. The BMW 3 Series models include: BMW 320i, BMW 325iM, BMW 320LiM, BMW 325Li xDrive M, BMW 320Li, etc. Taking the 2021 BMW 320i as an example, it is a mid-size car with a fuel tank capacity of 59L. The 2021 BMW 320i is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 156PS, a maximum torque of 250Nm, and a maximum power of 115kW, paired with an 8-speed automatic transmission.
20
4
Share

What is the size of the Baojun e100 windshield?

The size of the Baojun e100 windshield is 124 cm in width and 75 cm in height. Classification of automotive windshields: Automotive windshields mainly include laminated glass, tempered glass, zone-tempered glass, laminated tempered glass, and laminated zone-tempered glass. Laminated glass refers to a type of glass where a transparent adhesive plastic film is placed between two or three layers of glass, combining the toughness of the plastic with the hardness of the glass, thereby enhancing the glass's resistance to breakage. Regulations on automotive windshield size: The length-to-width ratio of the glass must not exceed 2.5. According to the national industry standard JC433-91, the thickness of wired glass is divided into: 6, 7, and 10 mm, with standard dimensions generally not less than 600mm × 400mm and not exceeding 2000mm × 1200mm.
10
2
Share

How many cylinders does the Lingpai 1.8 engine have?

The Lingpai 1.8-liter naturally aspirated engine is a four-cylinder engine, and models equipped with this engine have been discontinued. Here are some details about the Lingpai: 1. The Lingpai's 1.8-liter naturally aspirated engine delivers 136 horsepower and a maximum torque of 169 Nm. This engine can output maximum power at 6,500 rpm and maximum torque at 4,300 rpm. 2. This engine features i-VTEC technology and uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 3. The Lingpai uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. Compact cars typically use torsion beam non-independent suspensions for the rear. The torsion beam suspension is compact, simple in structure, and occupies minimal space.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.