What to Do If a White Car Gets Stained by Red Cloth?

2 Answers
LeilaRose
07/28/25 8:44pm
Solutions for a white car stained by red cloth: 1. Solutions: If the staining is not severe, you can use a specialized car cleaner spray available at auto beauty shops, then wipe it off. Some of these professional cleaners can even remove paint scratches, making stains easier to clean. If the staining is extensive and severe, and left untreated for a long time, you will need to go to an auto beauty shop for polishing. Avoid polishing the same car multiple times, as each polishing session will thin the paint layer, damaging the finish. 2. White Car Maintenance Methods: Avoid prolonged exposure to sunlight, as it can cause the car to turn yellow. The ultraviolet rays from the sun are the main reason for paint yellowing. Therefore, do not let sunlight directly hit the car; it's best to park in a shaded area. Wash the car frequently, especially after rainy days, as rainwater and dust can easily accumulate on the surface. Clean it promptly to prevent dirt from adhering to the car body for too long, which can lead to paint yellowing.
Was this review help?
9
4
Share
DelGarrett
08/12/25 1:28am
My white car had a similar issue before—it got stained with red after being parked next to a red cloth. I immediately wiped the surface gently with a damp cloth to prevent the dye from drying, as it becomes much harder to clean once dried. Then, I sprayed a specialized car cleaner onto the stain, let it soak for a few minutes, and wiped it off with a soft cloth. If any marks remained, I tried using a magic sponge recommended by a car detailing shop, which worked well. Remember not to scrape with nails or hard objects to avoid damaging the paint. If DIY methods fail, don’t hesitate—take it to a professional car wash where they can use polishing tools. Spending a little money is better than ruining the paint. This experience taught me to park away from brightly colored items, especially fabric materials.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

What is the size of the Geely Emgrand steering wheel?

Geely Emgrand steering wheel has a diameter of approximately 36.5CM and a thickness of about 9.3CM. A small size will suffice. Composition of the steering wheel skeleton: It is generally made of zinc alloy or aluminum alloy. Some manufacturers are experimenting with the use of cheaper and lighter magnesium alloys. The skeleton is produced through die-casting. A few manufacturers still use steel plate for the skeleton, which is structurally complex. The initial steering wheel: The earliest cars used a tiller for control and steering. While not necessarily bad, the tiller transmitted the intense vibrations from driving to the driver, making it more difficult to control the direction. When the engine was relocated to the front of the car, the increased weight made it impossible for the driver to continue using the tiller to steer the vehicle.
1
5
Share

What is the function of the HOLD button in a car?

The function of the HOLD button in a car is gear locking, which allows locking in any gear of an automatic transmission car (except for the P, R, N three gears). The role of the HOLD button: The HOLD button adjusts the optimal driving state according to different driving conditions, effectively preventing the transmission from frequent gear shifts on poor road surfaces, and serves as a forced downshift (without upshifting) during overtaking. Detailed introduction to the HOLD function: When pressing the HOLD button in D gear, the transmission will remain in second, third, or fourth gear (mainly fourth gear). When pressing the HOLD button in 3rd gear, it will remain in second or third gear (mainly third gear). When pressing the HOLD button in 2nd gear, it will remain in second gear. When pressing the HOLD button in 1st gear, it will remain fixed in first gear.
14
2
Share

What is the ground clearance of the Teana chassis?

Nissan Teana has a chassis height of 138mm. The Nissan Teana chassis adopts the mainstream front MacPherson and rear multi-link independent suspension, with the overall chassis setup leaning towards comfort. Definition of chassis height: Chassis height (i.e., minimum ground clearance) defines the minimum height between the chassis and the ground when the car is fully loaded. The car's passability is reflected in this data. Range of chassis height: Theoretically, the chassis height of family cars usually falls within the range of 110-150 millimeters. For family sedans, a higher chassis height (generally referring to over 13 centimeters) means better passability, but stability is compromised when driving on highways; if the ground clearance is less than 110 millimeters, there is stable handling on highways, but the car's passability is poorer.
11
2
Share

How Much Force is 25 Torque?

1 torque equals 0.102kg, so 25 torque equals 2.55kg. Concept of Torque: Torque is a special type of moment that causes an object to rotate. The torque of an engine refers to the moment output from the crankshaft. Under a fixed power condition, it is inversely proportional to the engine speed—the faster the speed, the smaller the torque, and vice versa. It reflects the load capacity of a car within a certain range. External torque is called torsion or external couple moment, while internal torque is referred to as internal couple moment or simply torque. Significance of Torque Magnitude: For passenger cars, higher torque means better acceleration; for off-road vehicles, greater torque allows for steeper climbing angles; for trucks, increased torque enables the vehicle to haul heavier loads. Generally, the higher the torque, the better the vehicle performs. This holds true during driving as well—under the same displacement, higher torque indicates a superior engine.
12
1
Share

What are the differences between BYD and Tesla?

BYD and Tesla have the following differences: In terms of appearance: Tesla's exterior design is dynamic and smooth, which is truly stunning, while the interior design is more dreamy, reflecting a futuristic feel. Compared to Tesla, BYD's exterior and interior designs appear more modest but closer to a modern aesthetic, and many people prefer this style. In terms of safety: Each Tesla uses over 7,000 18650 lithium batteries, which are similar to AA batteries and were specifically developed for Tesla. An important feature of these batteries is their fast charging capability and longer range. BYD's new energy vehicle, the Tang DM, uses ternary lithium batteries. BYD has been deeply involved in the battery field for many years, and its battery technology is very mature. Although ternary lithium batteries may not charge as quickly as 18650 batteries and may have a slightly shorter range, the product quality of these ternary lithium batteries used by BYD is more stable.
2
5
Share

What are the remedies for a two-year driver's license revocation?

The BMW 730 is equipped with an 8-cylinder engine. The BMW 730 belongs to the BMW 7 Series. Below are detailed introductions about the BMW 7 Series: Overview: The BMW 7 Series is BMW's top-tier luxury sedan series, featuring a 4-door sedan body style and a front-engine, rear-wheel-drive layout. The BMW 7 Series is the flagship model of BMW, exclusively produced in Germany. It replaced the previous model, BMW New Six, in 1977. Other specifications: The vehicle dimensions are 5212mm in length, 1902mm in width, and 1478mm in height. It has an 82L fuel tank capacity and a standard seating capacity of 5. The top speed is 245km/h, with leather seat materials. The acceleration time ranges from 4.6 to 8.3 seconds (0-100km/h), and it features ventilated disc brakes.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.