What to Do If a Vehicle Fails to Undergo Annual Inspection on Time?

How is the SAIC dry dual-clutch transmission?

SAIC's dry dual-clutch technology is quite mature, but there are some minor issues. The SAIC dry dual-clutch transmission may experience severe overheating when frequently shifting between first and second gears in traffic jams. The driving techniques for dry dual-clutch transmissions are as follows: 1. Light throttle and gentle start: The gentle start is because the original design allows the dual-clutch to output maximum torque in second gear, while first gear lacks sufficient power. Therefore, you should wait until the throttle smoothly transitions to second gear before pressing the accelerator further. 2. Shift to neutral when parking: The principle of the dual-clutch is similar to that of a manual transmission. When parking, the clutch is not completely disengaged. Due to the purely mechanical connection principle, when the brake is pressed for a long time with the gear engaged, the energy has nowhere to go, causing some wear on the clutch disc.

6

3

Share

How to Determine VVT Pulley Abnormal Noise?

Here are the inspection and handling steps for determining VVT pulley abnormal noise: 1. Abnormal noise occurs when the car is idling or running at low speed. Possible causes include excessive clearance between the piston and cylinder wall; overly tight piston pin or connecting rod bearing assembly; wear of the camshaft profile, etc. 2. Abnormal noise appears during rapid acceleration of the engine. Possible reasons may include loose connecting rod bearings, melted or mismatched bearing shells causing rotation; loose crankshaft bearings or melted bearing shells; broken piston pin; broken crankshaft. Extended information: 1. VVT (Variable Valve Timing) technology is used in automotive piston engines. It refers to controlling the advance and delay of intake valve angles under specific conditions to adjust the intake/exhaust volume and valve overlap angle, thereby increasing intake impulse and efficiency, and improving engine power, torque, etc. 2. If the engine VVT pulley is damaged and produces abnormal noise, the car will experience unstable engine idling and increased fuel consumption, which can also cause certain damage to the engine. Therefore, timely repair is necessary to avoid accidents.

8

0

Share

How soon can traffic violations be checked?

Violations captured by traffic cameras will be notified within one week, while those issued with on-site tickets will be notified within 15 days. Under special circumstances, the notification period may be extended. The specific timeframes are as follows: Electronic monitoring violations: 48 hours (normally not exceeding 1 week); On-site violations: within 15 days. Below is relevant information about vehicle violation inquiries: Inquiry methods: You can log in to the external service websites of the Public Security Traffic Management Bureau of each city: locate the vehicle violation inquiry section, enter the license plate number and vehicle engine number, then click to inquire. You can also call the inquiry hotline, send a text message to check violations, or download mobile applications such as Wheel Violation Check for mobile users. Input your vehicle information to check violations in real time. Driving suggestions: Drivers should familiarize themselves with traffic regulations and regularly check their violation records online to avoid failing the annual vehicle inspection.

16

1

Share

How Many Liters of Engine Oil Does a Car Need?

Car needs about 4 liters of engine oil, and the filling amount should be between the upper and lower marks on the oil dipstick. The functions of engine oil are: 1. Relieve friction and high temperature; 2. Cool down; 3. Clean; 4. Dampen and buffer; 5. Prevent rust and corrosion. Engine oil, also known as motor lubricant, is composed of base oil and additives. Base oil is the main component of lubricating oil, determining the basic properties of lubricating oil, while additives can compensate for and improve the shortcomings of base oil performance. The hazards of using inferior engine oil are: 1. Damage the quality of engine oil, reducing its performance; 2. Damage the lubrication of precision parts such as fuel pumps and injectors; 3. Reduce the power of the generator set; 4. Affect the combustion effect of the engine.

19

5

Share

Is It Necessary to Get an Original Car Key?

It is necessary to get an original car key. Here are the relevant details: 1. Introduction to Keys: Keys are a commonly used unlocking tool in daily life, primarily made from materials such as copper, zinc, aluminum, iron, and other metals. The invention of keys came later than locks, appearing in ancient Egypt 4,000 years ago. There are various types of keys, including ordinary keys, smart keys, remote keys, electronic keys, etc. 2. Difference Between Good and Bad Keys: Some key blanks may appear metallic on the surface but are actually of very poor quality. They can break after a short period of use, even before wearing out. These key blanks cannot be distinguished by the naked eye alone, but a simple test of lightly tossing them onto a hard surface like concrete or glass can reveal the difference. A good metal blank produces a crisp metallic sound, while a poor one makes a dull, muffled noise similar to plastic hitting a hard surface.

1

Share

Which is better, mechanical supercharging or turbocharging for an engine?

Mechanical supercharging delivers power more directly and linearly, without the feeling of being neither here nor there. It doesn't require the use of full synthetic oil like turbocharged engines, has a longer lifespan, and operates at lower engine temperatures. Additionally, turbocharging takes time to engage, whereas mechanical supercharging provides faster and more responsive feedback. Overall, mechanical supercharging is superior to turbocharging. Below are the relevant details: 1. Mechanical Supercharging: Primarily designed for large-displacement engines, these engines have sufficient torque to drive the mechanical supercharger and require the main power output to be in the low-speed range below 4500 RPM. 2. Turbocharging: Mainly suited for small-displacement engines, it requires the engine's transmission components (often referring to the camshaft section) to handle the high temperatures caused by high-speed rotation. The turbo's power output range is above 4500 RPM, which is a typical value, meaning the faster the engine speed, the better the supercharging effect.

13

1

Share

What to Do If a Vehicle Fails to Undergo Annual Inspection on Time?

How is the SAIC dry dual-clutch transmission?

How to Determine VVT Pulley Abnormal Noise?

How soon can traffic violations be checked?

How Many Liters of Engine Oil Does a Car Need?

Is It Necessary to Get an Original Car Key?

Which is better, mechanical supercharging or turbocharging for an engine?

Is It Necessary to Clean the Exterior of the Engine?

What does the SE light mean?

Can an Electric Vehicle with Lead-Acid Battery Use Lithium Battery?

Should New Cars Undergo Crystal Coating?