What to Do If a Novice Driver Gets 6 Demerit Points for Traffic Violation?

1 Answers
JocelynFitz
07/24/25 11:19pm
Novice drivers who receive 6 demerit points for traffic violations can resolve the issue through the following methods: 1. On-site traffic police: If the penalty is issued on-site by traffic police via a ticket or penalty decision, simply pay the fine at the designated bank specified on the penalty notice. Be sure to handle the violation within the stipulated time frame, typically within 15 days of receiving the notice, otherwise late fees will be incurred. 2. Log in to the comprehensive service management platform: Access the traffic safety comprehensive service management platform, select the traffic violation processing service, and pay the fine. 3. Multiple unresolved violations may lead to license or vehicle seizure: If a driver discovers records of road traffic violations, they should address them promptly. Failure to handle multiple violation records may result in the traffic authorities legally confiscating the driver's license or vehicle.
Was this review help?
7
0
Share
More Forum Discussions

What is the fuel tank capacity of the Ninja?

The fuel tank capacity of the Ninja is 17L. Ninja body parameters: Its body length, width, and height are 2205mm, 715mm, and 1110mm respectively, with a seat height of 785mm, a wheelbase of 1416mm, and a curb weight of 158KG. Ninja engine parameters: It is equipped with a twin-cylinder four-stroke liquid-cooled engine, with an engine displacement of 124ML, a compression ratio of 11.3:1, a maximum net power of 20.0/11000kW/r/min, a maximum torque of 19.6/8500N-m/r/min, and a bore × stroke of 62.0×41.2mm.
8
5
Share

What is the ROVELO tire brand?

rovelo is the Rui Lu tire. The following is the relevant introduction of tires: 1. Precautions: The tires used on the car are the only parts in contact with the ground. During the use of the car, it is recommended to regularly check the condition of the tires and perform regular maintenance to ensure the normal operation of the car. 2. Maintenance: During the use of the car's tires, varying degrees of wear will occur. Even for the same type of car, the tire pressure and wear level cannot be exactly the same. It is necessary to regularly check the condition of the tires and perform maintenance. 3. Replacement cycle: Under normal usage conditions, the service life of tires is generally 5 years, or when the mileage reaches 6-10 million kilometers. The specific replacement cycle should be determined based on the actual usage of the car.
16
3
Share

What is the relationship between engine speed, vehicle speed, and gear in a car?

The relationship between engine speed, vehicle speed, and gear in a car is pairwise correspondence. Here are the introductions about the three: 1. The relationship between engine speed and vehicle speed: Engine speed and vehicle speed do not have a one-to-one correspondence, but also depend on the current gear, which is the speed ratio of the transmission. 2. The relationship between vehicle speed and gear: The recommended speed for each gear is about 15 km/h for 1st gear, 25 km/h for 2nd gear, 35 km/h for 3rd gear, 55 km/h for 4th gear, and 65 km/h for 5th gear. 3. The relationship between engine speed and gear: When the engine speed remains unchanged, the higher the gear, the faster the vehicle speed; the lower the gear, the slower the vehicle speed.
16
4
Share

What is the difference between Suzuki GSX250 and GSX250R?

Suzuki GSX250 and GSX250R have the following differences: 1. Different names: one is Suzuki GSX250, the other is Suzuki GSX250R. 2. Different features: The power platform of the Suzuki GSX250R is the mature twin-cylinder water-cooled asynchronous engine based on the GW250 by Haojue Suzuki. Its highlights are mature technology and large ownership. The Haojue Suzuki asynchronous twin-cylinder has small vibration, good quality, and a beautiful appearance. The biggest drawback is the weight of the bike. Among the legally registered twin-cylinder 250cc bikes in China, considering quality stability, it still has no rivals. CFMOTO's bikes are single-cylinder and also have a beautiful appearance, but the vibration control of single-cylinder bikes can never be as good as that of twin-cylinder bikes. 3. Different manufacturers: The Suzuki GSX250R is produced by the domestic joint venture Haojue Suzuki, making it a joint-brand domestic bike, while the Suzuki GSX250R is an imported bike.
10
3
Share

Does painting rims black affect the annual inspection?

Painting rims black does not affect the annual inspection. As long as the specifications remain unchanged, it will not impact the annual review. Here are the specific details: 1. Reason: In automobile traffic management regulations, there are no provisions regarding the color of rims. It is explicitly stated that the color of rims is not included in the 30% color range of the entire vehicle, so changing the color of the rims will not affect road use or the annual inspection. 2. During the annual inspection, the vehicle's exhaust emissions will be tested for compliance: specifically, the oxygen sensor and the three-way catalytic converter. Their optimal working temperature is between 400 to 800 degrees Celsius, so before the exhaust emission test, it is advisable to start the vehicle in the inspection area in advance to warm it up. This will increase the pass rate. Before the annual inspection, the owner should clean the vehicle body in advance. Cleaning the vehicle body, engine compartment, and chassis beforehand can provide convenience to the inspectors and also help pass the annual inspection.
16
2
Share

Does Not Returning the Steering Wheel to Center Harm the Car?

Not returning the steering wheel to center can harm the car. When turning the steering wheel, the vehicle is subjected to three types of forces: 1. Tire stress; 2. The aligning force of the steering linkage; 3. The force offset of the suspension system struts. When parked without returning the steering wheel to center, the vehicle's tires, steering mechanism, and suspension struts remain under continuous stress. Over time, this can accelerate the aging or deformation of these components. The steering wheel is the round device used to control the direction of the vehicle, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Most cars have airbags installed on the steering wheel, which can reduce the impact of the steering wheel on the driver in a collision, thereby protecting the driver's safety.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.