···
Log in / Register

What to Do If a New Energy Vehicle Gets Flooded?

5 Answers
MacLucia
07/29/25 2:16pm

The steps to take when a new energy vehicle gets flooded are: 1. Move the vehicle out of the flooded area and park it in a safe location; 2. Clean any dirt or debris inside and outside the vehicle; 3. Disconnect the power source and battery; 4. Park the vehicle in sunlight and open the windows for ventilation and drying; 5. Use the onboard diagnostic system to check if all vehicle components are functioning properly. A new energy vehicle refers to a vehicle that uses unconventional fuels as its power source, integrating advanced power control and driving technologies. These include: 1. Hybrid electric vehicles (HEVs); 2. Battery electric vehicles (BEVs); 3. Fuel cell electric vehicles (FCEVs); 4. Hydrogen engine vehicles; 5. Natural gas vehicles (NGVs); 6. Alcohol-ether fuel vehicles.

Was this review help?
20
0
Share
Freddie
08/13/25 6:29am

As a new energy vehicle owner, I'm particularly concerned about water ingress. If you find your vehicle submerged, immediately avoid starting the engine or power switches, as water can conduct electricity, potentially causing battery short circuits or fire hazards. Quickly exit the vehicle, remove the key or press the power-off button, and move to a safe location. Then promptly contact a towing company to transport the vehicle to a professional repair facility—never attempt to tow it yourself. The repair process typically involves drying out the entire electrical system and replacing damaged components; if the battery is severely damaged, it may need replacement. Prevention is crucial: check door seal strips for aging before the rainy season, avoid parking in low-lying areas like underground garages, and consider waterproof performance indicators when purchasing a vehicle. Regular maintenance can minimize accidents. Post-water ingress repairs are costly and usually covered by insurance claims—remember to take photos of the scene as evidence.

Was this review help?
10
2
Share
Expand All
FaithRose
10/10/25 8:09am

The most concerning issue with water entering new energy vehicles is the safety hazard. Once the high-voltage battery is submerged, it can easily cause a short circuit or explosion, so it's crucial to turn off all power buttons immediately. If someone is trapped, prioritize personal safety—turn off the engine and evacuate before calling for a tow truck. At the repair shop, technicians will use professional tools to test the battery's condition and dry the circuits, but battery component replacement is often necessary. Preventive measures include staying informed about weather warnings, avoiding travel during heavy rain, and installing flood protection kits for the vehicle. Improper handling after water exposure can lead to subsequent rust issues, increasing repair costs. Develop the habit of checking the sealing of the vehicle's charging port to avoid water ingress during car washes.

Was this review help?
7
0
Share
Expand All
IkerRose
11/24/25 2:32am

Don't panic if your new energy vehicle gets flooded. Key steps: Turn off the power, shut down the engine, exit the vehicle, and wait for a tow truck. Specifically, if you notice water ingress, do not start the car to prevent short circuits. Then, contact a repair shop or the towing service arranged by your insurance company. During repairs, check for corrosion in the battery and electrical wiring, as parts may need replacement. Additionally, during the rainy season, park on higher ground to avoid risks. Be cautious when washing your car daily; avoid high-pressure washing near the charging port. If water does enter, address it promptly to prevent further damage. Take photos when towing for insurance claims to reduce cost burdens. Acting quickly can minimize losses.

Was this review help?
14
2
Share
Expand All
Lauren
01/14/26 4:04am

The water ingress incident reminds me to take precautions. The core issue of water ingress in new energy vehicles lies in the electrical system. Once submerged, all power must be turned off, and you should quickly evacuate to a safe area. Using a mobile app to remotely shut down the vehicle is even better to prevent startup risks. Afterward, arrange for professional towing and transportation. During repairs, a comprehensive diagnosis of the circuits and battery is necessary to avoid potential self-ignition hazards. For prevention, choose vehicles with high waterproof ratings in flood-prone areas and regularly clean drainage holes. Post-flood repair costs are high, but timely insurance claims can cover most of the expenses. In daily use, avoid parking near rivers or in waterlogged areas to reduce the probability of malfunctions.

Was this review help?
17
4
Share
Expand All
More Forum Discussions

How to Turn On the Rearview Mirror Heating Function?

Here is an introduction on how to activate the rearview mirror heating function: 1. Before using the rearview mirror heating, ensure that the vehicle is in the started state or turn the key to the ON position to power on the vehicle. The rearview mirror heating function can only be used when the power is connected. Avoid using this function when the vehicle battery is low or malfunctioning. 2. When turning on the rearview mirror heating switch, be careful not to confuse it with the front windshield defogging/defrosting button. The switch in the green circle is for the front windshield defogging/defrosting function, while the switch in the red circle is for the rearview mirror heating. 3. During rainy or snowy weather, after pressing the rearview mirror heating switch, the indicator light on the button will illuminate. The heating element will quickly warm up to a set temperature (typically between 35-60°C) within minutes. Both left and right rearview mirrors will emit warm air, and the water droplets on the mirror surface will gradually evaporate and shrink due to the rising temperature. The fog will also slowly disappear, achieving the effect of heating the mirror, defogging, and defrosting. 4. Some vehicles are designed to activate the rearview mirror heating function only when the ambient temperature is below 15°C. Therefore, if the rearview mirror heating does not work at times, first check if the outdoor temperature is too high. If temperature is not the issue and the rearview mirror heating still does not function, it is advisable to seek timely inspection and repair.
14
3
Share

What causes a lean mixture in cylinder bank 1 at idle?

Idle mixture being too lean is mostly caused by the following reasons: clogged fuel injectors; excessive intake air; exhaust pipe leaks; aging or cracked PCV valve diaphragm causing air leaks. Here is additional information: Meaning: When the system indicates "too lean in cylinder bank 1 at idle," it means the air-fuel mixture in one bank of the engine is too lean. Automotive fuel injectors: A fuel injector is essentially a simple solenoid valve. When the solenoid coil is energized, it creates magnetic force that lifts the needle valve, opening the injection port. Fuel is sprayed at high speed through the annular gap between the needle valve and injection port, atomizing into fine mist for optimal combustion.
14
2
Share

What are the reasons for the engine's high-temperature fan not rotating?

Car water temperature does not meet the requirements, or the relay is faulty, or the temperature control switch has issues. Water temperature not up to standard: Most of today's car radiator fans operate electronically via temperature control. Therefore, the fan usually only starts rotating normally when the car's internal water temperature reaches the required level. If the temperature is too low, the radiator fan cannot rotate. Solution: If the car radiator fan fails to rotate, the first step is to check whether the water temperature has reached the required level. If the water temperature cannot rise, the car engine needs to be inspected. Relay failure: If the water temperature meets the requirements but the car radiator fan still does not work, the problem might lie with the fan's relay. If the relay is faulty, the car's radiator fan cannot operate. Solution: Replace the damaged relay. Temperature control switch issues: Some faults in the temperature control switch can also affect the operation of the car radiator fan, so it is important to check this as well. Solution: Replace the damaged temperature control switch.
19
5
Share

What are the reasons for the frequent stalling of the Buick Excelle GT automatic transmission?

Here are the reasons for the frequent stalling of the Buick Excelle GT automatic transmission: Stalling caused by carbon deposits: Carbon deposits usually accumulate in the throttle, spark plugs, cylinders, fuel lines, intake ducts, etc. They are a kind of coking substance produced by fuel under high temperature. General physical methods are difficult to remove, and special chemical cleaners are required for cleaning. Fuel quality and injector clogging: This situation is also relatively common. Using low-quality fuel not only produces more carbon deposits but may also clog the injectors, resulting in poor atomization. Additionally, low-quality fuel directly affects combustion efficiency, increasing fuel consumption. Unburned carbon monoxide entering the car and accumulating may even lead to poisoning and death. Ignition system issues: Common faults include spark plug carbon deposits and insufficient ignition voltage. The former can be addressed by using both physical and chemical methods to remove carbon deposits, while the latter can be resolved by replacing the spark plugs to address the insufficient voltage problem. Power supply issues: If the battery is severely depleted, it will make the engine difficult or even impossible to start. Generally, its service life is about 4 years. A nearly exhausted battery can be replaced, but repair is generally not recommended because the repaired battery has a short lifespan and is less reliable.
16
5
Share

Is Compact Car Bigger Than Subcompact Car?

Compact cars are larger than subcompact cars. The classification of subcompact or compact cars is based on vehicle length and wheelbase. Generally, vehicles with a body length less than 4200mm and a wheelbase less than 2620mm are classified as subcompact cars. Compact cars typically have a body length between 4200mm-4600mm and a wheelbase between 2620mm-2700mm. Subcompact cars generally refer to A0-class vehicles within the A-segment. These vehicles usually have a wheelbase between 2.2 meters to 2.3 meters (some models may fall outside this range) and an engine displacement of 1.0 to 1.3 liters. Common examples of subcompact cars include: Xiali, Suzuki Swift, MG 3SW. Subcompact cars generally have low fuel consumption and compact dimensions, offering more comfortable and spacious interiors compared to microcars. Compact cars typically have larger exterior dimensions and interior space than subcompact cars, allowing them to accommodate more passengers. Compact cars, also known as A-segment cars, are the most common family vehicles, with wheelbases generally ranging from 2.5-2.7 meters and engine displacements around 1.6-2.0 liters. In China, the compact car segment includes domestic brands, joint-venture models, and imported vehicles. Common examples of compact cars include: Buick Excelle, Chevrolet Cruze, Hyundai Elantra, Nissan Sylphy, Mazda 3, Volkswagen Lavida, Bora, Ford Focus, etc.
6
0
Share

What Documents Are Needed to Drive a Fire Truck?

To drive a fire truck, a B2 driver's license is required. Below is a detailed introduction to obtaining a B2 license: Requirements for obtaining a B2 license: Age requirement: 20-50 years old. The age on the ID card shall prevail. Height requirement: above 155cm. Vision requirement: naked eye vision or corrected vision must reach 5.0 or above on the vision chart. Situations where one cannot apply for a B2 license: being responsible for a traffic accident resulting in death with equal or greater liability; driving under the influence of alcohol; having the driver's license revoked or canceled within the past ten years. Driving during the probation period: when driving on highways during the probation period, the driver must be accompanied by someone who has held a driver's license for the corresponding or higher vehicle type for more than three years.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.