What to Do If a New Car Cannot Be Licensed?

What is the fuel consumption per 100 kilometers for a 10-year-old Forester?

10-year-old Forester's fuel consumption per 100 kilometers is 13 liters. Below are the fuel consumption calculation formula and fuel-saving tips: Correct fuel consumption calculation formula: Fuel consumed ÷ distance traveled × 100 = fuel consumption per 100 kilometers. The data on fuel consumed is relatively difficult to obtain accurately. Generally, a full tank is used as the initial data. After traveling a certain distance, the tank is filled again, and the fuel amount provided by the gas station is taken as the final data. Fuel-saving tips: Idling for more than 1 minute consumes the same amount of fuel as starting the engine once. The fuel consumed by idling the engine for 5 minutes can allow the car to travel more than 1 kilometer.

4

5

Share

What are the reasons for the high fuel consumption of BYD F0?

Here are the reasons for the high fuel consumption of BYD F0: 1. Idling: When the car is idling, fuel continues to be consumed without an increase in mileage, which inevitably leads to higher fuel consumption. 2. Warm-up time: The fuel injection rate is high during idle warm-up. Prolonged warm-up before driving in winter can cause an increase in fuel consumption. 3. Sensor damage: Check if the oxygen sensor is damaged. The oxygen sensor primarily monitors the air-fuel ratio in the engine. Once damaged, it can cause an imbalance in the engine's air-fuel ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, black smoke may be emitted from the exhaust pipe while driving. In this case, the oxygen sensor needs to be replaced.

11

1

Share

What is the difference in fuel consumption between 1.5t and 2.0t?

The fuel consumption difference between 1.5t and 2.0t is around 3L to 4L. To compare the fuel efficiency or power of engines, it must be done under the same technical level, as there are significant differences in engine technology among different brands and manufacturers. Fuel economy and performance are inherently two opposing aspects, which is something car owners need to weigh. Introduction to engine fuel consumption: 1. The larger the displacement, the higher the corresponding fuel consumption, but this may not hold true for two engines with different intake forms. 2. The main factor determining engine fuel consumption is the engine's output power, the essence of which is the fuel injection volume, which truly determines the fuel consumption.

11

0

Share

What are the reasons for the restricted automatic emergency braking function in BYD vehicles?

The reasons for the restricted automatic emergency braking function in BYD vehicles are as follows: 1. Dirt on the multifunctional video controller camera area of the front windshield; 2. Malfunction of the multifunctional video controller itself; 3. Failure of the mid-range detection radar; 4. Wiring faults; 5. Other interference issues. Additional information: The AEB (Autonomous Emergency Braking) system is designed to enhance driving safety. It actively applies the brakes (though it may not always bring the vehicle to a complete stop) when the vehicle encounters sudden hazards or when the distance to the preceding vehicle or pedestrian is less than the safe distance, thereby avoiding or reducing the occurrence of rear-end collisions and other accidents.

14

5

Share

What is the service life of a seat belt?

Seat belts have a service life of 3 to 5 years and should be scrapped in advance if any abnormalities are found. Seat belts are devices installed in vehicles to reduce passenger injuries when the vehicle body is subjected to severe impacts, ensuring the safety of both passengers and the driver. Public security authorities require all front-seat occupants to wear seat belts, so that in the event of a traffic accident, the seat belt can serve to secure and cushion the person, preventing secondary injuries. In addition to seat belts for both front and rear seats, vehicles are also equipped with airbag systems. In the event of a collision, the airbags automatically inflate and deploy to prevent occupants from hitting the vehicle body, thereby protecting them.

9

4

Share

How to Check Whether It's an Automatic or Manual Transmission?

You can check whether the vehicle is registered as an automatic or manual transmission by looking at the rear emblem: MT stands for manual transmission, while CVT or AT indicates an automatic transmission. Below are the specific differences between automatic and manual transmissions: 1. Operation Difficulty: Manual transmissions primarily rely on the driver stepping on the clutch to complete gear shifts, while automatic transmissions use the hydraulic transmission principle of a torque converter to automatically shift gears. 2. Safety: Manual transmission vehicles can lose power when in neutral, posing a safety hazard during driving. Automatic transmission vehicles cannot be driven in neutral, making them safer. A manual transmission requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission and alter the gear ratio. An automatic transmission does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.

9

5

Share

What to Do If a New Car Cannot Be Licensed?

What is the fuel consumption per 100 kilometers for a 10-year-old Forester?

What are the reasons for the high fuel consumption of BYD F0?

What is the difference in fuel consumption between 1.5t and 2.0t?

What are the reasons for the restricted automatic emergency braking function in BYD vehicles?

What is the service life of a seat belt?

How to Check Whether It's an Automatic or Manual Transmission?

What are the effects of antifreeze?

How to activate cruise control in the Sagitar?

Where is the Bluetooth in Infiniti QX50?

What does 0-100 km/h acceleration mean for a car?