What to Do If a Motorcycle Fails Annual Inspection?

1 Answers
LeKai
07/29/25 11:38pm
When going to the designated vehicle management office for inspection, the office will issue a penalty notice for overdue inspection. Then, you need to visit the traffic police department to handle the overdue inspection and accept the penalty. The annual inspection date is indicated on the vehicle license. It's important to be aware of your vehicle's inspection schedule: non-commercial vehicles require biannual inspections after 15 years, while commercial vehicles require biannual inspections after 10 years. Generally, fines must be paid in most cases.
Was this review help?
6
3
Share
More Forum Discussions

What is the difference between a motorcycle and a locomotive?

Motorcycles and locomotives differ in the following ways: Different principles: A locomotive utilizes power generated by steam engines, diesel engines, or traction motors, which is then transmitted through the locomotive's drive system to propel the wheels forward. A motorcycle, on the other hand, generates and delivers power through its engine, transmitting it via the clutch to the gearbox, and finally to the wheels to drive forward. Different road conditions: Compared to motorcycles, locomotives are more suitable for rugged and uneven terrains like mountain roads, while motorcycles are better suited for flat surfaces such as highways. Motorcycles are powered by gasoline engines and primarily rely on handlebar steering for front-wheel control, making them more agile and faster, often used for patrol purposes.
10
4
Share

What are the reasons for a motorcycle jerking while riding?

The reasons for a motorcycle jerking while riding include the following: Engine misfire: An engine misfire refers to one cylinder in a multi-cylinder engine stopping operation, which can cause abnormal shaking, weak acceleration, and other symptoms. Professional inspection and repair are required. Engine overheating: After prolonged or aggressive driving, the engine temperature may exceed normal levels, triggering the engine fault light. In this case, simply stop the vehicle and allow it to cool naturally. Severe engine carbon buildup: Severe carbon buildup in the engine can lead to weak acceleration, increased fuel consumption, and other issues. Timely cleaning is necessary in such cases.
3
1
Share

Should the positive or negative terminal of a car battery be connected first?

First connect the positive terminal, then the negative terminal. Introduction to car batteries: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, what people refer to as a battery is a lead-acid battery. That is, a battery mainly made of lead and its oxides, with a sulfuric acid solution as the electrolyte. How car batteries work: They use lead plates filled with sponge-like lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and a 22% to 28% dilute sulfuric acid solution as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy.
11
1
Share

Can a Pickup Truck with a Rear Cover Enter the City?

A pickup truck with a rear cover cannot enter the city. Privately installing a rear box cover on a pickup truck is illegal. Modifications that are not permitted for registration changes include: Changing the brand, model, and engine type of the vehicle, except for engines that are optionally installed with the permission of the national automotive product authority. Altering the registered appearance and technical data of the vehicle, unless otherwise specified by laws, regulations, and national mandatory standards. Modification considerations: No registration is required for decorative modifications such as rearview mirrors, small stickers, or small spoilers. However, changing the color or replacing the rims or body kits must be registered. Vehicle modifications must not damage the original body structure or electrical wiring to prevent safety hazards.
14
1
Share

What is the Difference Between Touch-up Painting and Spray Painting?

Spray painting and touch-up painting differ in the following aspects: Process Differences: The processes and material selection principles for the two methods vary. Original factory paint is suitable for high-temperature baking in assembly lines. When using original factory paint for repairs, it is important to note that the paint may not dry properly if the required cross-linking and film-forming temperature is not reached. Original factory paint requires the coating thickness to meet quality standards, whereas during vehicle repairs, thickness measurement is rarely checked with a thickness gauge, which should not be overlooked. Material Differences: The painting process and materials used for automotive plastic body parts also differ and require careful distinction. Automotive touch-up paint often cannot meet the process requirements of original factory coatings. Therefore, the two should not be used interchangeably arbitrarily. Even when performing repairs on the original factory painting line, original factory paint is generally not used; instead, automotive touch-up paint is more commonly chosen.
18
0
Share

Which stroke is the power stroke?

The power stroke is the power stroke. A four-stroke internal combustion engine completes a working cycle within four strokes: intake, compression, power (expansion), and exhaust, during which the crankshaft rotates twice. Intake stroke: At this time, the intake valve opens and the exhaust valve closes. Air passing through the air filter, or the combustible mixture formed by mixing with gasoline in the carburetor, enters the cylinder through the intake pipe and intake valve; Compression stroke: The gas in the cylinder is compressed, increasing pressure and temperature; Power stroke: Before reaching the top dead center of compression, fuel is injected or ignited, causing the mixture to burn, generating high temperature and high pressure, pushing the piston downward and performing work; Exhaust stroke: The piston pushes the exhaust gas in the cylinder out through the exhaust valve. After this, the intake stroke begins again, starting the next working cycle.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.