What to Do If a BMW Gets a Little Paint Scratched?

1 Answers
DelRonan
07/29/25 11:58pm
Solutions for paint scratches on a BMW are as follows: 1. Apply toothpaste: Toothpaste can alleviate scratches because it contains abrasive components, which is equivalent to giving the car body a simple waxing. Toothpaste also provides some anti-oxidation effects. 2. Use car wax: There are scratch wax or gloss-enhancing wax. First, apply scratch wax to the scratched area of the car body, then use a waxing sponge to rub the area in one direction only—either clockwise or counterclockwise—without changing direction midway. Finally, apply a layer of gloss-enhancing wax. 3. Use a touch-up pen: First, gently sand the surface with fine sandpaper, remembering to sand in a straight-line direction. Then apply a layer of primer and wait for it to dry before applying the original paint or using a touch-up pen. 4. Use soft paint sealing glaze: Suitable for vehicles with softer paint. Applying a layer of soft paint sealing glaze is equivalent to reinforcing the car paint, or you can use coating to achieve a protective effect.
Was this review help?
3
2
Share
More Forum Discussions

Why is the steering of a large truck unstable and difficult to control?

The causes of steering wheel shaking or wobbling include the destruction of the dynamic balance of the front wheel assembly due to tire patching or repair, loose parts in the drive shaft assembly, destruction of the dynamic balance of the drive shaft assembly, failure of the shock absorber, inconsistent stiffness of the leaf springs, wear and looseness of steering system components, and improper front wheel alignment. Below is more related information: 1. Always pay attention to abnormal noises in the vehicle: While driving, the driver should closely monitor the sounds from various parts of the vehicle. Once an abnormal noise is detected, the first step is to accurately determine whether the sound is coming from inside or outside the vehicle. If it is confirmed to be from inside the vehicle, it may not be a big issue; if it is from outside, the vehicle should be stopped for inspection. 2. Learn to read the faults on the dashboard: For novice drivers, learning to read the dashboard is very important. Pay frequent attention to the pointers on the dashboard and the icons displayed. Whenever a red light appears on the dashboard, stop the vehicle and turn off the engine for inspection as soon as possible.
20
4
Share

What Causes the Steering Wheel of Highlander to Make Abnormal Noises When Turning?

If the abnormal noise from the Highlander's steering wheel is heard coming from below the steering wheel, it is necessary to check the steering column dust cover. Once the steering column dust cover lacks lubrication, it will produce a dry friction sound. Simply applying some grease inside the dust cover will make this noise disappear. More relevant information is as follows: 1. Sound from the rebound clip: Additionally, if the sound from the rebound clip occurs only after turning on the turn signal and then turning the steering wheel, it is the sound from the rebound clip of the turn signal auto-return mechanism. This sound is normal. When turning the steering wheel smoothly, there will be a clicking sound, and for every full rotation of the steering wheel, there will be three clicking sounds. This is because there are three auto-return notches in one full rotation of the steering column, hence the sound. This sound will disappear as long as the turn signal is turned off. 2. "Clicking" sound: If a "clicking" sound is heard from below the steering wheel when turning it, it may be the sound from the universal joint in the steering column. In this case, lubricating the universal joint with grease can be tried. If the noise persists, this component may need to be replaced.
13
5
Share

Which car has the fastest 0-100 km/h acceleration?

Tesla Roadster. The 0-100 km/h acceleration time largely reflects a vehicle's true power performance. Compared to rigid engine parameters, the 0-100 km/h acceleration figure provides a more intuitive understanding for most consumers about the actual power levels of different vehicles. Below are the main factors determining a vehicle's acceleration speed: 1. Wheel power: For a vehicle's power, the commonly seen power and torque parameters from manufacturers or vehicle specifications actually refer to the peak data the engine can achieve under ideal conditions. In daily use, the actual usable data is far less than the officially calibrated figures. 2. Transmission: Simply put, a transmission that can deliver smoother and more continuous shifting under full throttle conditions must have better transmission efficiency. The absence of significant RPM drops between gears prevents power loss, allowing the engine to operate near its maximum power RPM, which is a prerequisite for faster acceleration. 3. Drivetrain: Common front-wheel-drive vehicles often have disadvantages in 0-100 km/h acceleration. It's basic physics: when a vehicle accelerates forward, the inertial force acting on its center of gravity creates a torque that shifts weight to the rear of the vehicle, meaning the rear wheels generate more traction at that moment.
19
4
Share

How many people can a motorhome accommodate?

It depends on the permitted passenger capacity indicated on the vehicle's conformity certificate. If it's 5, then it's 5 people; if it's 6, then it's 6 people. Generally, small motorhomes accommodate between 4 to 6 people. According to new standards, the approved passenger capacity for recreational vehicles should be less than or equal to 9 people, but when the vehicle length is less than 6 meters, the approved passenger capacity should be less than or equal to 6 people. More relevant information is as follows: 1. The passenger limit depends on the specific model's capacity: The passenger limit for motorhomes depends on the capacity of the specific model. Type B001: 5 seats and 2 beds. Type B002: 4 seats and 3 beds. Type B003: 5 seats and 4 beds. Type C005: 4/5 seats and 5 beds. 2. The rated passenger capacity is clear at a glance: Although motorhomes have spacious interiors, considering comfort during travel, the number of passengers should be arranged appropriately. If there are too many people, you can consider renting several motorhomes for the trip.
1
3
Share

What is the Toyota TRD?

TRD is a tuning company under Toyota, similar to Mercedes-Benz's AMG. More extended information is as follows: 1. TRD stands for Toyota Racing Development, which is Toyota's racing division. Many of Toyota's professional racing cars are built by TRD, and many of Toyota's sports cars are also built by TRD. 2. Below are the Toyota models that have TRD products: CROWN (Crown); REIZ/MARK-X (Mark X); PRADO (Prado); ALPHARD (Alphard); YARIS/VITZ (Yaris/Vitz); CAMRY (Camry); 86 (GT86).
8
1
Share

Is a truck driver's license B1 or B2?

B1 is a type of passenger vehicle license, while B2 is a truck license. Here are more related details: 1. Different permitted vehicle types: 1. The permitted vehicle types for a B1 license are medium-sized passenger vehicles, defined as those not exceeding 6 meters in length, with a rated passenger capacity of 10 (inclusive) to 19 (inclusive) people. The permitted vehicle types include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). It should be noted that B2 is not included in the permitted vehicle types for a B1 license. If a driver with a B1 license wants to drive large trucks, they can upgrade their license to a B1B2 license (or A1, A2, A1A2, etc.). 2. The permitted vehicle types for a B2 license are heavy, medium-sized trucks or large, heavy, medium-sized specialized operation vehicles. Heavy and medium-sized trucks are mostly trucks, such as the large trucks commonly seen on the road carrying construction waste, which belong to heavy trucks. Large, heavy, medium-sized specialized operation vehicles refer to vehicles equipped with special equipment or tools, such as sprinklers, concrete mixer trucks, fire trucks, etc. 2. Different application requirements: 1. The age requirement for applying for a B1 license is 21-50 years old. A B1 license cannot be applied for directly; it requires at least 3 years of driving experience and no record of 12 penalty points in three consecutive scoring cycles. 2. The age requirement for applying for a B2 license is 20-50 years old, and a B2 license can be applied for directly.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.