What to Do If a Beginner Keeps Drifting While Driving?

What are the reasons for a car's accelerator not responding?

The reasons for a car's accelerator not responding are: the throttle sensor is too dirty or the voltage is imbalanced. The working principle of the accelerator is: when the accelerator pedal is pressed, it directly controls the throttle valve. The throttle valve opening will increase, allowing more air to enter the engine. At this time, the ECU will command the fuel injection system to inject more fuel, causing the engine speed to rise and the car to accelerate. Precautions for pressing the accelerator are: 1. Press and release the accelerator pedal gently, ensuring smooth and gradual movements; 2. Releasing the clutch should be closely coordinated with pressing the accelerator, with agile actions; 3. Choose an appropriate gear to ensure the engine operates mostly at medium speed and larger throttle openings to save fuel; 4. Before the car stops or the engine shuts down, the accelerator pedal should be released first, avoiding sudden revving of the engine without load.

9

2

Share

Should You Turn Clockwise or Counterclockwise When Changing a Tire?

When changing a tire, you should loosen the lug nuts counterclockwise and tighten them clockwise. The functions of a tire are: 1. To transmit driving force, braking force, and steering force for vehicle operation; 2. To support the vehicle load; 3. To reduce and absorb vibrations and impacts during driving, preventing severe vibrations from damaging vehicle components. Tire maintenance methods include: 1. Regularly removing stones stuck in the tire tread; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment; 6. Adopting careful driving habits, such as choosing smooth road surfaces and avoiding objects that could puncture or scratch the tires, as well as chemical spills that may corrode them.

9

4

Share

What are the differences between Audi Q5L and Q5?

The differences between Audi Q5L and Q5 are: 1. Different fuel tank capacity: Audi Q5L has a fuel tank capacity of 73 liters; Audi Q5 has a fuel tank capacity of 75 liters. 2. Different curb weight: Audi Q5L has a curb weight of 1855kg; Audi Q5 has a curb weight of 1900kg. 3. Different body dimensions: The length, width, and height of Audi Q5L are 4753mm, 1893mm, and 1659mm respectively, with a wheelbase of 2908mm; The length, width, and height of Audi Q5 are 4629mm, 1898mm, and 1655mm respectively, with a wheelbase of 2807mm.

8

0

Share

Can engine oil opened for one year still be used?

Engine oil that has been opened for one year cannot be used because it has been too long. Once the oil cap is opened, it should be used as soon as possible; otherwise, the oil will deteriorate, and its lubrication performance will decrease. The functions of engine oil are: 1. To separate the surfaces of relatively sliding parts, thereby reducing wear; 2. To bring heat back to the oil tank and then dissipate it into the air, helping the radiator cool the engine; 3. To circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, flushing away dirt generated on the working surfaces of the parts through the flow of the lubricating oil. Signs that indicate the need to change the engine oil include: 1. Checking the viscosity of the oil—if there is no viscosity, the oil needs to be changed; 2. The color of the oil turns black; 3. Excessive black particles, metal shavings, or carbon deposits in the oil; 4. The smell of the oil is abnormal.

12

2

Share

Should Snow Chains Be Installed on Front or Rear Wheels?

Whether snow chains should be installed on front or rear wheels depends on the vehicle type: for front-wheel drive vehicles, install chains on the front wheels; for rear-wheel drive or four-wheel drive vehicles, install chains on all four wheels. The installation method for automotive snow chains is as follows: 1. Lay the snow chain flat and centered in front of the tire; 2. Drive the vehicle forward half the length of the snow chain so that the tire's contact point is at the center of the chain; 3. Fasten the hooks on the inner side of the tire, then fasten the hooks on the outer side of the tire; 4. Continue moving the vehicle forward to adjust the connection points under load during installation, then secure the snow chains firmly.

15

1

Share

What is the ACC switch?

ACC in automobiles stands for Adaptive Cruise Control. The ACC button is the switch for turning the vehicle's adaptive cruise control system on and off. Currently, there are mainly two types of cruise control systems in vehicles: one is ACC adaptive cruise control, and the other is conventional cruise control. The ACC adaptive cruise control system primarily includes functions such as speed adjustment, following the vehicle ahead, active braking, lane keeping, and lane departure warning and correction. Conventional cruise control only has the speed-setting function. Speed adjustment function: The driver sets a specific speed. Given the complex and varied traffic conditions on the road, it is often difficult for a vehicle to maintain a constant speed smoothly. ACC adaptive cruise control has the capability to decelerate and accelerate according to road conditions, which is the most distinctive feature differentiating it from conventional cruise control. Following the vehicle ahead function: This function ensures the distance between our vehicle and the one ahead. The driver can adjust the following distance to maintain a safe gap from the vehicle in front. Active braking function: When the vehicle is in a dangerous or near-dangerous situation, it can actively brake to a stop. Currently, this function's recognition range is limited to hazards directly ahead, with no accurate identification for side or rear hazards. Lane keeping function: The lane keeping function reduces driver fatigue by keeping the vehicle within the lane on roads with clear lane markings. The emergence of this function also marks the implementation of Level 2 driving assistance. Automatic speed adjustment frees the driver's feet, while the lane keeping function, under specific conditions, frees the driver's hands. Key switch function: ACC on the key switch allows the use of the vehicle's auxiliary electrical devices when the engine is off. Independent steering wheel button function: The independent ACC button on the steering wheel is the control switch for the cruise control. Difference between ACC and ON: Typically, when the vehicle is parked and the engine is off, the key is in the LOCK position, disconnecting the vehicle's circuits and cutting power to the entire vehicle, with the steering wheel locked. When the key is in the ACC position, some electrical devices in the vehicle, such as the radio and audio system, are powered, but other components of the vehicle remain without power.

18

3

Share

What to Do If a Beginner Keeps Drifting While Driving?

What are the reasons for a car's accelerator not responding?

Should You Turn Clockwise or Counterclockwise When Changing a Tire?

What are the differences between Audi Q5L and Q5?

Can engine oil opened for one year still be used?

Should Snow Chains Be Installed on Front or Rear Wheels?

What is the ACC switch?

What are the symptoms of insufficient power steering fluid?

What does 93w on a wheel mean?

Can the free ten-time maintenance engine oil provided by Nissan be used?

Can license plates be reissued in a different location?