What to Do If 12 Points Are Deducted from a C1 Driver's License?

3 Answers
IsabelleFitz
07/23/25 1:11pm
C1 driver's license deducts 12 points of the treatment method is: need to go to the vehicle management office within fifteen days to accept a seven-day road traffic safety laws, regulations and related knowledge learning. After participating in the study, the motor vehicle driver applies for the road traffic safety laws, regulations and related knowledge test. If the test is passed, the points will be cleared and the motor vehicle driver's license will be returned. If the test fails, the driver will continue to participate in the study and test. A driver's license is a license required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills. Without these skills, if you drive a motor vehicle at will, traffic accidents may occur. Generally, people cannot drive on the road without a license.
Was this review help?
1
3
Share
DeHarley
08/10/25 11:03am
When my C1 license got 12 demerit points, it felt like falling into a pit—had to act fast. First, I received a text from the traffic bureau ordering me to report to the local transport office, sign in, and enroll in a week-long safety education course. Had to attend lectures daily, covering traffic rules and such. After completing it, I had to retake the theoretical exam (Subject 1), which had tons of questions—took me two weeks of studying to pass. After passing, I got a completion certificate to restore my license points. Delaying could lead to license suspension, and if caught driving, fines plus detention—left me anxious for weeks. My advice: develop a habit of tracking points early to avoid a mess like mine.
Was this review help?
4
5
Share
Expand All
VonCarter
09/22/25 4:49am
I understand that getting 12 points deducted is quite complicated: you need to go to the traffic management office within seven days to apply for the learning process, bring your ID card and driver's license, register, and then attend training at a designated location. Typically, a one-week course covers regulations and lessons from accidents. After completing the course, you'll take the subject one exam. If you pass, you'll receive a study certificate to restore your points. Don't forget, your driving privileges are suspended after the deduction, and if caught driving, you could face a fine of over 2000 and 15 days of detention. Always pay attention to speed limits and traffic signals—prevention is key. Bringing a car-savvy friend along for advice can also save you some hassle.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is the actual fuel consumption of the Luxgen U7?

The average fuel consumption of the Luxgen U7 5-speed automatic 2.2T 178HP L4 is 14.09, with a range of 12.12-16.05. The main factors affecting fuel consumption are as follows: 1. Unnecessary increase in vehicle load. Many new car owners tend to overload their cars with various decorations and exterior accessories. 2. Frequent braking and starting. Apart from the car's design and engine factors, the real waste of fuel is caused by the driver's habits, especially frequent sudden braking and rapid acceleration, which are the biggest contributors to increased fuel consumption. 3. High speed at low gear. The biggest misconception in driving is maintaining high speed at low gears. Tests have shown that driving long distances at high speed in 3rd gear increases fuel consumption by 10% compared to normal driving in 4th gear, and using 2nd gear instead of 3rd gear further increases fuel consumption.
18
1
Share

What are the symptoms of a bad rear wheel bearing?

Here are the manifestations of a faulty rear wheel bearing in a car: 1. Abnormal noise is the main symptom of a bad rear wheel bearing. 2. When the rear wheel bearing fails, the wheel will wobble while driving, and as the vehicle speed increases, the entire car will shake more severely. 3. The car will emit a continuous humming sound, which becomes louder as the speed increases. The following are the causes of rear wheel bearing damage: 1. Damage or rust to components, caused by foreign objects entering or misalignment of the roller path, as well as prolonged exposure to acidic liquids or moisture, leading to rust. 2. Poor lubrication. If there is insufficient grease between the rollers and the raceway, dry friction will occur, resulting in abnormal metal friction sounds. 3. Clearance issues. There should be appropriate gaps between car components. When the distance between the rollers and the raceway becomes too small, it can easily cause friction and overheating, leading to bearing seizure.
19
0
Share

How to Deal with Engine Overheating?

Here are the steps to handle engine overheating: 1. Safely drive the vehicle off the road and park in a safe location. Set the transmission to "P" gear and apply the parking brake. Turn on the hazard warning lights. If the air conditioning is in use, turn it off. 2. If steam is escaping from the gaps in the engine hood, open the hood while keeping the engine running. 3. Check whether the radiator fan is operating normally. 4. After the temperature gauge needle drops, turn off the engine. 5. Once the engine has cooled down, open the radiator cap and check the coolant level in both the radiator and the reservoir. Also, inspect whether the radiator is dirty or covered with debris. 6. If the coolant is insufficient, refill the radiator and reservoir with coolant. In an emergency, if no coolant is available, add water as a temporary measure.
19
0
Share

Where is the VIN located on the Jianghuai Refine?

The VIN of the Jianghuai Refine is located under the rear of the passenger seat. There is a small black cover that can be moved aside to reveal it. Alternatively, the VIN and engine number may also be found in the lower left corner of the front windshield or within the engine compartment. Below is relevant information: 1. VIN Overview: The VIN is a combination of 17 letters and numbers arranged in a specific sequence, providing details about the vehicle's country of manufacture, year, model, engine type, and more. 2. Label Position: Except for trailers and motorcycles, the label should be affixed to the door hinge pillar, door lock pillar, or one of the door edge pillars adjacent to the door lock, near the driver's seat. If such a location is not available, it should be fixed on the left side of the dashboard. If that is also not possible, it should be placed on the inner side of the door near the driver's seat. If none of the above positions are feasible, a written application must be submitted to the NHTSA. The label's position should be easily readable without moving any vehicle parts, except for the exterior door.
17
1
Share

Where to Find the Vehicle Make and Model?

Generally, the vehicle make and model can be found in conspicuous locations such as the engine compartment, the left side of the dashboard, or the lower left corner of the windshield. Typically, there is also a VIN (Vehicle Identification Number) plate near the driver's seat, on the door hinge pillar, door lock pillar, or one of the door edges connected to the lock pillar. Additionally, the vehicle make and model are often listed in the vehicle's registration certificate, owner's manual, and insurance policy. Below are the functions of the vehicle make and model: 1. Confirming Vehicle Identity: Especially in special circumstances, the VIN can accurately identify your vehicle, saving time. The uniqueness of the VIN ensures better confirmation of the vehicle. 2. Traffic Violation Inquiry: When checking for traffic violations, the VIN is usually required to proceed with the inquiry. The VIN serves as the vehicle's ID card and should be kept secure. 3. Vehicle Batch Inquiry: With the continuous addition of car brands and numerous recalls, the VIN helps determine whether a vehicle falls within a recall range, preventing potential malfunctions during use that could lead to financial losses. It also ensures safe driving. If the vehicle's batch is within the recall range, immediately contact a 4S shop or the manufacturer.
8
0
Share

Why does the brake feel harder than before?

Brakes are mechanical braking devices that can slow down the speed of a vehicle, also known as decelerators. There are two main reasons why the brake pedal feels harder than before: 1. Vacuum booster pump leakage or malfunction: If you did not press the brake pedal after the car was turned off, or if you find it difficult to press the brake pedal while driving, it may be caused by a leak or blockage in the vacuum tube of the brake booster pump. 2. Pressing the brake before turning off the engine: The brake booster pump only continuously generates vacuum when the engine is running. When the engine is not running, it relies on the remaining vacuum assistance, which usually disappears after a few presses. However, this phenomenon will return to normal after restarting the engine and is not a malfunction.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.