What to Do If 11 Points Are Deducted from Your Driving License?

1 Answers
Emersyn
07/30/25 4:36am
Just avoid any further violations, and after the scoring cycle ends and all fines are paid, your driving license will naturally be restored to 12 points. Below is some information about obtaining a driving license: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test. It is a written test conducted on a computer, with a full score of 100. A score of 90 or above (including 90) is required to pass. 2. Subject 2: Field driving skills test. This involves actual vehicle operation on a closed course, with only pass or fail outcomes. It includes five mandatory tasks performed in sequence: reverse parking, parallel parking, S-curve driving, right-angle turns, and hill starts and stops. The full score is 100, with a passing score of 80 or above (including 80). 3. Subject 3: Road driving skills test. This is conducted on actual roads or simulated environments, with a full score of 100. For large buses, a score of 90 or above is required to pass; for large trucks, 80 or above; and for other vehicle types, 70 or above. 4. Subject 4: Safe and civilized driving knowledge test. This is a written test with a full score of 100, requiring a score of 90 or above (including 90) to pass.
Was this review help?
19
5
Share
More Forum Discussions

How to Install CarPlay if the Original Vehicle Doesn't Have It?

Add a CarPlay module to the original vehicle's infotainment system, which comes in wired and wireless versions. It's simple, convenient, doesn't damage any original wiring, and is cost-effective. Replace the entire original infotainment system. This method is only recommended for original systems, as it may damage the original infotainment system and wiring. Use an adapter to enable CarPlay functionality, but you need to choose the right one based on your vehicle's infotainment system. Whether to install CarPlay depends on personal needs, and it should be done with minimal damage to the original wiring.
17
4
Share

How to Turn on the Heater in a Haval M6?

After starting the car, it takes approximately 6 to 8 minutes for the water temperature to rise to the normal level. At this point, you can turn on the heater. Adjust the air conditioning's circulation mode to internal circulation and switch to the heater mode, indicated by the red zone. Set the air conditioning to a suitable temperature level, generally above 25 degrees Celsius, and adjust the air vent direction upwards.
9
4
Share

How to Replace the Battery When the Key Battery is Low?

First, prepare the tools: a small flat-head screwdriver, the car key, and the compatible electronic battery for the car key. There is a button on one side of the car key; pressing it allows you to pull out the mechanical key. Insert the flat-head screwdriver into the "open" position at the front end of the key. Separate the car key into two halves, then use the flat-head screwdriver to pry out the battery. After removing it, place the new battery in the correct position, ensuring the ± poles are properly aligned. After installing the battery, press the two halves back together, then insert the mechanical key to complete the assembly.
6
3
Share

How to Delete Bluetooth Devices When Honda XRV's Bluetooth Memory is Full (6 Devices)?

Press the MENU button below the display, rotate the LIST button downward to enter settings (do not click confirm). Press the dial button below the steering wheel, then press the list button to select "No" as confirmation. Enter phone settings, then enter Bluetooth settings, and press the list button again. Scroll down the page to find "Delete Device," locate the Bluetooth device you want to delete, and click the list button. Press the list button again to delete that Bluetooth pairing information.
18
5
Share

How to Replace the Wiper Blades on a Volkswagen Tiguan?

After turning off the vehicle, do not remove the key immediately. Within 3 seconds, pull the wiper control lever inward, and the wiper blades will move to the maintenance position. Apply slight force to pull the wiper blade toward the front of the car. When pulled to a certain position, it will lock firmly in place. Press the silver button on the wiper arm, hold the wiper blade with your hand, and gently pull it outward to remove the old rubber strip. When installing the new rubber strip, remember to stagger the two metal pieces and ensure it is inserted into the first groove. Once the rubber strip is successfully installed, follow the reverse steps of the removal process to complete the wiper blade installation.
10
4
Share

How to Check the Tire Pressure of All Four Tires on the Oshan X5?

First, press the car's brake pedal, then press the one-button start button to start the car's engine. All the lights on the dashboard will illuminate, confirming that the vehicle's electronic systems are powered on. You can then check the tire pressure of all four tires on the dashboard. If any tire pressure is abnormal, you can proceed to inflate it. Once all four tire pressures are normal, you can press the tire pressure reset button to clear the tire pressure warning. The tire pressure warning light alerts the driver to check the tire pressure. At this point, you should not continue driving and must stop immediately to inspect and repair the tires.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.