···
Log in / Register

What to Do After Passing Subject One?

4 Answers
DiValerie
07/29/2025, 09:53 PM

After passing Subject One, you can start practicing for Subject Two in the car. At the same time, you need to make an appointment with a coach in advance to schedule each practice session. If you fail, you will need to retake the exam. If you do not participate in the retake or fail the retake, the current exam session will be terminated, and the applicant must reschedule the exam. Driving Test Sequence: The exam sequence follows Subject One, Subject Two, and Subject Three in order. Only after passing the previous subject can you proceed to the next one. Within the validity period of the driving skill test permit, the number of retakes for Subject Two and Subject Three road driving skill exams must not exceed five. If you fail the fifth retake, the results of other previously passed subjects will be invalidated. Subject Two Exam Content Includes: For large buses, tractors, city buses, medium-sized buses, and large trucks: stake test, hill start and stop, parallel parking, single-plank bridge, curve driving, right-angle turn, narrow gate passage, continuous obstacle course, bumpy road driving, narrow road U-turn, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling. For small cars, small automatic transmission cars, small automatic transmission cars for disabled passengers, and low-speed trucks: reverse parking, hill start and stop, parallel parking, curve driving, and right-angle turn. For three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and mopeds: stake test, hill start and stop, and single-plank bridge. The exam content for wheeled self-propelled machinery, trolleybuses, and trams is determined by the provincial traffic management authorities of the public security department.

Was this review help?
9
0
Share
SanHannah
08/15/2025, 03:46 AM

After passing Subject 1, I felt both relieved and excited, and immediately started preparing for Subject 2. Subject 2 includes practical operations such as reverse parking, hill starts, and parallel parking, with the key being to practice the test site techniques frequently. I will contact the driving school instructor to arrange training sessions, usually two to three times a week, each lasting a little over an hour, focusing on strengthening steering and clutch control. Watching some videos to learn standard movements and simulating turns while maintaining a steady speed to avoid crossing lines is helpful. During this period, it's important not to rush; building a solid foundation is crucial for truly mastering driving skills. Don't rest too long after the theory test; starting practical training as soon as possible can improve the pass rate, especially since Subject 2 is prone to mistakes due to nervousness. Daily review of traffic rules and applying this knowledge in simulated driving can be beneficial. With consistent practice, you can complete the subsequent subjects in a few months.

Was this review help?
13
3
Share
Expand All
NolanLee
10/20/2025, 11:01 PM

After passing the written test (Subject 1), I believe the next step is to start training for Subject 2. Subject 2 mainly focuses on field driving, such as right-angle turns and curve driving, which requires familiarity with vehicle operations. First, I'll confirm my passing score, then schedule practice sessions with the instructor, usually about one hour each time. During practice, pay attention to safety, check if the brakes and turn signals are functioning properly, and develop the habit of fastening the seat belt. Practice basic maneuvers more, such as how to prevent rolling back during hill starts. Don't relax after the theory test; promptly gain practical experience to reduce mistakes during the exam. It's recommended to combine driving simulation apps to assist learning, which can also save time and costs. Getting a driver's license is a step-by-step process. Starting training immediately after the theory test helps adapt to real road conditions faster. Maintain regularity by practicing several times a week for higher efficiency.

Was this review help?
5
4
Share
Expand All
DeJuliet
12/03/2025, 10:29 PM

After passing Subject 1, I usually take a day or two off, have a cup of coffee to adjust my mood, and then start preparing for Subject 2. Contact the driving school to arrange practice sessions, as Subject 2 includes tasks like parallel parking and reverse parking. First, review your mistakes and find an instructor to guide you on basic operations. During practice, focus on steering and speed control to minimize throttle errors. It's recommended to practice two to three times a week to maintain your skills. Don't delay after the theory test; take action promptly.

Was this review help?
11
2
Share
Expand All
More Forum Discussions

What are the differences between imported and domestically produced BMW 5 Series?

The differences between the imported and domestically produced versions of the BMW 5 Series lie in the body dimensions, wheelbase, and configurations, but they share the same engines: a 2.0T turbocharged four-cylinder engine and a 3.0T inline six-cylinder engine. The BMW 5 Series is one of the best-selling models of BMW in China. It is a sedan with a longitudinally mounted rear-wheel-drive engine, equipped with a variable valve timing control system and an anti-slip regulation (ASR) system. It features advanced technology, offering superior driving performance and safety. The differences between the imported and domestically produced BMW 5 Series are: Different body dimensions: The imported BMW 5 Series measures 4976mm in length, 1868mm in width, and 1489mm in height, while the domestically produced version measures 5106mm in length, 1868mm in width, and 1500mm in height. The domestically produced model is larger, providing more space. Different wheelbase: The imported BMW 5 Series has a wheelbase of 2975mm, while the domestically produced version has a wheelbase of 3105mm. Both the imported and domestically produced BMW 5 Series are equipped with a 2.0T turbocharged four-cylinder engine and a 3.0T inline six-cylinder engine, delivering a maximum horsepower of 184ps, a maximum power of 135kw, and a maximum torque of 290nm, paired with an 8-speed dual-clutch transmission. These engines have maximum outputs of 184hp, 252hp, and 340hp, with maximum torques of 250N.M, 350N.M, and 450N.M, respectively. They are matched with an 8-speed automatic transmission, achieving a fuel consumption of 6.5L to 7.2L per 100km and top speeds of 235km/h, 250km/h, and 250km/h. Different configurations: The domestically produced BMW 5 Series includes additional features such as car networking, adaptive high beams, and steering wheel memory, while the imported version offers more exterior and interior color options. The imported BMW 5 Series also features auto-dimming rearview mirrors and sport-style leather seats, whereas the domestically produced version includes electric steering wheel adjustment, steering wheel memory, car networking, adaptive high and low beams, and cornering lights.
2
3
Share

What is the venue car?

The venue is a Hyundai imported car, positioned as a compact SUV. Below are the relevant details about the venue car: 1. Powertrain: It is equipped with a 1.0-liter turbocharged three-cylinder engine, delivering a maximum output power of 74 kW and a peak torque of 172 Nm. For the transmission system, it is paired with both manual and automatic dual-clutch gearboxes. 2. Exterior Design: The Venue features a front grille designed with a crossover pattern of horizontal and vertical stripes, adorned with silver chrome trim. The chrome accents incorporate subtle crease designs.
9
4
Share

Is the Camry 10-speed CVT durable?

The Camry 10-speed CVT is relatively durable. Toyota's 10-speed CVT transmission is essentially a combination of what is referred to as an E-CVT transmission and a 4AT transmission, forming ten gear ratios. Relevant information about automotive transmissions is as follows: 1. Introduction to automotive transmissions: CVT refers to a type of automotive transmission, also known as a continuously variable transmission. 2. The difference between CVT and stepped transmissions: The difference between CVT and stepped transmissions lies in the fact that its gear ratios are not discrete points but a series of continuous values, thereby achieving good fuel economy, power performance, and smooth driving, while also reducing emissions and costs.
12
0
Share

How to Check Vehicle Details via VIN Number?

Methods for checking vehicle details via VIN number are as follows: 1. Positions 1-3: The first character is an alphanumeric indicating a geographic region, the second character is a letter or number indicating a specific country within that region, and the third character is a letter or number assigned to a specific manufacturer, allocated by each country's authorized agency. 2. Positions 4-8: Represent vehicle characteristics, such as passenger cars, MPVs, trucks, or buses. 3. Position 9: Check digit, calculated through standardized weighted computation. 4. Position 10: Model year (generally indicating the vehicle's manufacturing year, serving as a crucial identifier). 5. Position 11: Vehicle assembly plant. 6. Positions 12-17: Sequential production number.
11
2
Share

What does a keyless entry system for cars mean?

Keyless entry system for cars means unlocking or locking the car without operating the remote key. Below is how the keyless entry system works: 1. In-car smart card recognition: When the car owner enters the vehicle, the in-car detection system immediately recognizes the smart card, automatically unlocking/locking the doors through the chip induction in the smart card carried by the owner. 2. Smart card identity verification for unlocking: After verification, the in-car computer activates. At this point, simply pressing the start button (or turning the knob) inside the car can normally start the vehicle.
18
4
Share

What brand is the Buick Excelle engine?

Buick Excelle 1.6 is equipped with German Opel ECO engine and 1.6T turbocharged engine. Here are the relevant introductions about the engine: 1. The engine is a machine that converts one form of energy into mechanical energy. Its function is to transform the chemical energy of burning liquid or gas into thermal energy through combustion, and then convert the thermal energy into mechanical energy through expansion to output power externally. 2. The engine is a complex machine composed of many mechanisms and systems. 3. The automobile engine is the device that provides power for the car, serving as the heart of the vehicle. It determines the car's power performance, fuel economy, stability, and environmental friendliness.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.