What to Do After a Dry Dual-Clutch Transmission Gets Submerged in Water?

What do the numbers on the engine represent?

The numbers on the engine are the Vehicle Identification Number (VIN). Vehicle Identification Number: Composed of 17 characters, it is commonly known as the 17-digit code. Correctly interpreting the VIN is crucial for accurately identifying the vehicle model and performing proper diagnosis and repairs. The VIN serves as the car's ID number, determined according to national vehicle management standards, containing information such as the manufacturer, year, model, body type and code, engine code, and assembly location. Information contained in the VIN: It includes a lot of information. Positions 1 to 3 represent the automobile manufacturer, brand, and type. The 2nd position is the manufacturer code, and the 3rd is the vehicle type code. Positions 4 to 8 indicate vehicle characteristics. The 9th position is a check digit. The 10th position represents the model year. The 11th position indicates the assembly plant, and positions 12 to 17 are the serial number.

16

3

Share

What is the top speed of the Lynk & Co 03+?

The Lynk & Co 03+ accelerates from 0 to 100 km/h in 5.9 seconds, making it the high-performance variant of the 03 model. Below are some key details about the Lynk & Co 03+: Dimensions: The Lynk & Co 03+ is a compact sedan with a wheelbase of 2730 mm. Its length, width, and height are 4677 mm, 1840 mm, and 1461 mm, respectively. It is a four-door, five-seater vehicle. Engine: The car is equipped with a 2.0-liter turbocharged engine that delivers 254 horsepower and a maximum torque of 350 Nm. The engine achieves its peak power at 5500 rpm and its maximum torque between 1800 and 4800 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. Transmission: The engine is paired with an 8-speed automatic transmission (8AT), which enhances gear-shifting smoothness and fuel efficiency. The 8AT transmission is also known for its reliability and durability.

16

4

Share

Should You Shift to Neutral at Traffic Lights with an Automatic Transmission?

It is necessary to shift to neutral when waiting at traffic lights with an automatic transmission. Precautions for shifting gears in an automatic transmission are as follows: 1. Do not press the accelerator pedal when shifting gears; 2. Do not immediately press the accelerator pedal hard after shifting into gear; 3. The vehicle can only be started in P or N gear; 4. To shift out of P gear, the brake pedal must be pressed; 5. Do not shift into N gear while driving to coast; 6. Do not push into P gear while the vehicle is moving; 7. When changing the direction of travel, switching between D and R gears should only be done after the vehicle has come to a complete stop; 8. Placing the gear in N while driving prevents the oil pump from supplying oil normally for lubrication, which can raise the temperature of internal transmission components and cause damage.

19

1

Share

Why is it prohibited to use mobile phones at gas stations?

The proportion of gasoline vapor in the air around gas stations is excessively high. If it encounters electrical sparks from mobile phones, it may cause an explosion. The following are relevant introductions about gas stations: 1. No smoking: Strictly no open flames is a common warning seen everywhere at gas stations. For friends who have the habit of smoking a cigarette after parking, this habit must not be brought to gas stations. Because when refueling, the concentration of gasoline in the unit space increases, and open flames may ignite the gasoline. 2. No phone calls: The primary threat of using mobile phones at gas stations is safety issues. When a call is connected, the signal strength instantly increases, which may generate electronic friction with the electronic equipment at the gas station and ignite the gasoline vapor. Although the intensity of this friction is not high and the probability of danger is also low, theoretically, this possibility exists. Therefore, for absolute safety, the use of mobile phones is prohibited at gas stations. In addition, similarly due to the change in signal strength when a call is connected, there is a hidden danger of interfering with the operation of the gas station's electronic equipment. For the normal operation of these devices, car owners should not use mobile phones inside the gas station.

14

2

Share

How Many Liters of Engine Oil Does the Lynk & Co 01 Require?

The Lynk & Co 01 requires approximately 5.3L of engine oil. Below is an introduction to the Lynk & Co 01: Powertrain: Equipped with a 2.0TD turbocharged engine from the Drive-E series, delivering a maximum power of 140kW at 4500rpm and a peak torque of 300Nm between 1400-4000rpm. Its fuel consumption per 100 kilometers is below 7L, with the two-wheel-drive model at 6.5L/100km and the four-wheel-drive model at 6.9L/100km. The 0-100km/h acceleration times are 7.7s and 7.9s, respectively. Features: The Lynk & Co 01 boasts a comprehensive NVH luxury configuration, effectively preventing noise and vibration at the source. It blocks noise transmission paths and optimizes sound quality for purer and more stable frequency performance. Additionally, it comes with an INFINITY Hi-Fi-grade 10-speaker audio system with a total power output of 360W, offering a premium-level audio experience.

1

2

Share

Can tires still be used after five years?

It is recommended to replace them. Generally, tires should be replaced every 5 years or after driving 60,000 to 80,000 kilometers. If there is uneven wear, the tread wear indicators are reached, or the tires show signs of aging cracks, it is advisable to replace them with new tires for safety reasons. Tires are one of the most important components of a vehicle, with the following main functions: 1. Reducing vehicle load: Tires bear the entire weight of the vehicle; they transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface. 2. Absorbing vehicle impact: Tires mitigate and absorb vibrations and impacts during driving, preventing excessive vibration and premature damage to vehicle components. They also enhance high-speed performance, reduce driving noise, and ensure safety, handling stability, comfort, and fuel efficiency. Tires are typically composed of three parts: the outer tire, inner tube, and flap. Some tires are tubeless, featuring an inner layer with excellent airtightness and requiring specialized rims.

17

5

Share

What to Do After a Dry Dual-Clutch Transmission Gets Submerged in Water?

What do the numbers on the engine represent?

What is the top speed of the Lynk & Co 03+?

Should You Shift to Neutral at Traffic Lights with an Automatic Transmission?

Why is it prohibited to use mobile phones at gas stations?

How Many Liters of Engine Oil Does the Lynk & Co 01 Require?

Can tires still be used after five years?

What causes the ABS and anti-skid warning lights to illuminate in the Lingdong?

Where is the headlight height adjustment for the Audi A4L?

Will the 4S dealership fill up the gas tank when picking up the car?

Which is Better: Tire Pressure Warning or Tire Pressure Display?