What to Do About the Toyota Vios' Air Conditioning Resonance Noise During Acceleration?

What is the displacement of the Audi Q5?

The displacement of the Audi Q5 is 1984ml, equipped with a 2.0T L4 turbocharged engine, delivering a maximum horsepower of 190ps, maximum power of 140kw, and maximum torque of 320nm, paired with a 7-speed dual-clutch transmission. The Audi Q5 is a mid-size SUV with body dimensions of: length 4753mm, width 1893mm, height 1659mm, wheelbase of 2908mm, front track of 1616mm, rear track of 1610mm, fuel tank capacity of 73l, luggage compartment capacity of 550l, and a curb weight of 1855kg.

9

5

Share

Buick Excelle Makes Abnormal Noise When Turning Right and Accelerating?

Based on your vehicle model and the symptoms described, the main possible causes are as follows: 1. CV joint; If the dust cover of the vehicle's half-shaft CV joint is damaged or the CV joint performance deteriorates, abnormal noise will occur when turning, and the sound is relatively sharp. 2. Friction phenomenon; This refers to the friction between the inner fender liner and the tire, and the sound is a 'squeaking' type. In summary, considering the conditions under which the vehicle's symptoms occur and based on repair case analysis, the above phenomena are generally the most common. However, it is recommended that you visit a repair shop for an on-site test drive to determine the specific cause of the fault before proceeding with repairs.

19

1

Share

Is a car tire pressure of 200 kPa normal?

Car tire pressure of 200 kPa is not normal. The normal tire pressure range is between 220 to 280 kPa. In winter, it is appropriate to increase the pressure by 20 kPa, and in summer, decrease it by 10 kPa to prevent tire blowouts. The hazards of insufficient tire pressure are: 1. Increased road friction coefficient, leading to higher tire temperature and potential tire blowouts; 2. Heavy steering wheel, which is not conducive to driving safety; 3. Damage to the tire bead. Solutions for insufficient tire pressure: 1. Replace the tire; 2. Rotate the tire positions. Reasons for insufficient tire pressure: 1. Leaky tire valve; 2. Wheel rim deformation reducing tire sealing performance; 3. Uneven tire force distribution.

17

3

Share

The Difference Between Manual and Automatic Transmissions

Here are the differences between automatic and manual transmissions: 1. The main difference lies in the type of transmission used. Manual transmission vehicles use manual gearboxes, while automatic transmission vehicles use automatic gearboxes. 2. A manual transmission requires the driver to manually shift gears by operating the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed changes. An automatic transmission, on the other hand, does not require the driver to manually shift gears; the transmission automatically selects the appropriate gear based on driving conditions. 3. There are significant differences in usage and structure between automatic and manual transmissions. Firstly, all operations of a manual transmission are performed by the driver, making it less convenient than an automatic transmission. However, manual transmissions have advantages such as simple structure, low manufacturing cost, cheaper maintenance, lower failure rate, higher transmission efficiency, and better fuel economy.

11

3

Share

What is the speed limit in school zones?

School zones typically have a speed limit not exceeding 30 kilometers per hour. Additional information about speed limits is as follows: Introduction: Speed limits generally refer to the regulated maximum driving speed within a certain distance of a road section, primarily aimed at preemptively alerting drivers to control their speed appropriately in subsequent sections ahead and prevent speeding hazards. Speed limits are an indispensable and most crucial aspect of road transportation safety. Area Speed Limits: Based on traffic laws and regulations or corporate facility rules, specific areas are delineated under practical circumstances, with standardized maximum driving speeds for vehicles within those zones. Common applications of area speed limits include school zone speed limits, factory zone speed limits, and speed limits for external vehicles, among others. The ultimate goal of area speed limits is to reduce speeding accidents and create a safe driving environment for people, vehicles, and objects in areas such as school campuses or factory zones.

15

0

Share

How Many Points Are Deducted for Stalling During the Test?

Stalling during the Subject 3 driving test will result in a deduction of 10 points. Additional information about stalling is as follows: Introduction: Also known as flameout. When the reactor is operating at a significant reaction rate, if the inlet temperature of the feed is reduced to the lower limit of the multiple-state region, the reaction rate will suddenly drop significantly, and the reaction will basically stop. This phenomenon is called flameout. Preventing Stalling: Although stalling can occur for various reasons, the main causes are improper coordination of the clutch, throttle, brake, and gear positions. This requires new drivers to quickly familiarize themselves with their vehicle, master the sensitivity of the throttle pedal, and understand the length of the clutch's free travel. If the pedal position is not suitable, it can be adjusted.

6

1

Share

What to Do About the Toyota Vios' Air Conditioning Resonance Noise During Acceleration?

What is the displacement of the Audi Q5?

Buick Excelle Makes Abnormal Noise When Turning Right and Accelerating?

Is a car tire pressure of 200 kPa normal?

The Difference Between Manual and Automatic Transmissions

What is the speed limit in school zones?

How Many Points Are Deducted for Stalling During the Test?

Does the Buick Envision S really consume a lot of fuel?

Does driving over speed bumps at 40 mph damage the car?

How fast can a 48V 1000W motor run?

What car has a logo with a very thick '1'?