What to Do About Squeaky Brakes When Reversing?

How to Check the Thickness of Car Brake Pads?

Brake pad thickness can be checked visually. For some vehicles, the brake pads can be seen through the gaps in the wheel hub. If the brake pads have worn down to one-third of the standard thickness, it is recommended to replace them. Below are the detailed steps: 1. Visual inspection: The thickness of brake pads can be measured by eye. For some cars, the brake pad thickness can be viewed through the gaps in the wheel hub. Tilt your line of sight at a 15° angle to the plane of the wheel hub and look into the gap between the brake pad and the brake disc to check the thickness. If the brake pads have worn down to one-third of the standard thickness, it is advisable to replace them promptly. 2. Professional measurement tools: Brake pad thickness can also be measured using specialized tools. These tools come with various thickness measurement options and can provide recommendations. Alternatively, you can rely on feel—if the brake pedal feels lighter than usual or braking becomes difficult or ineffective, it may indicate insufficient brake pad thickness, leading to inadequate friction. In such cases, immediate replacement is necessary to avoid accidents.

15

5

Share

What is the fuel tank capacity of Foton Tunland in liters?

Foton Tunland's fuel tank capacity is 80 liters, which is the officially announced data. The fuel grade for Foton Tunland is No. 0 diesel, with a fuel consumption of 9.0 to 14.0L per 100 kilometers. A full tank can cover a distance of 571 to 889 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. Generally, this is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety limit. There is still some space from the safety limit to the tank opening, which is reserved to allow for fuel expansion when the temperature rises, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.

3

4

Share

What is the parts-to-whole ratio of the BMW 3 Series GT?

The parts-to-whole ratio of the BMW 3 Series GT is 25%. Definition of parts-to-whole ratio: The parts-to-whole ratio coefficient is the ratio of the sum of the prices of all parts of a car to the sales price of the whole vehicle. The higher this coefficient, the more expensive the parts of the car are. However, some car manufacturers, in order to "mislead" consumers, only reduce the prices of high-value, low-loss-frequency parts but do not lower the prices of commonly used parts. Although the parts-to-whole ratio coefficient decreases, the actual maintenance costs for consumers do not significantly drop. Therefore, the "common parts burden index" was officially introduced. It refers to the sum of the prices of 18 individual common parts multiplied by their loss rates, divided by the sales price of the whole vehicle. Calculation method of parts-to-whole ratio: The higher the index, the more expensive the common parts are. Of course, if only calculating the parts-to-whole ratio of a single common part, simply divide the price of the single part by the sales price of the whole vehicle. From the overall data, the average parts-to-whole ratio coefficient of the 100 models released this time is 350.93%, an increase of 13.96 percentage points compared to 2019; the average common parts index is 17.31, an increase of 1.15. Over the past two years, the average prices of parts and common parts of these mainstream products have shown an upward trend.

8

2

Share

How Long Does a Car Service Take?

Generally, a routine inspection takes between 40 minutes to 2 hours, but it may take longer if the vehicle has any faults. Here is some relevant information: 1. Service items include: changing the engine oil, replacing the oil filter, checking and topping up the coolant reservoir, checking and topping up the windshield washer fluid, checking and adjusting the tire pressure, and performing a basic engine cleaning. These are the most basic items, and completing all of them typically takes about 2 hours. 2. Therefore, how often a vehicle needs servicing depends on the manufacturer's specific guidelines, which vary for different manufacturers and models. The recommended service intervals and mileage are based on the wear patterns of various components, so they are quite precise.

17

4

Share

Is the Highlander a product of GAC Toyota or FAW Toyota?

The Highlander is an SUV under GAC Toyota. Here are the detailed specifications: 1. Dimensions: The length, width, and height are 4890/1925/1720mm respectively, with a wheelbase of 2790mm. 2. Powertrain: The Highlander is equipped with a 2.0-liter turbocharged four-cylinder engine. This engine delivers a maximum power of 162kw and a maximum torque of 350Nm. It is paired with a 6-speed automatic transmission (6AT), which enhances gear-shifting smoothness and fuel efficiency. 3. Suspension Type: The Highlander features a MacPherson independent front suspension and an E-type multi-link independent rear suspension. The multi-link suspension improves both the vehicle's handling and ride comfort.

6

1

Share

What is the ground clearance of the Golf 8?

The ground clearance of the 2021 Golf is 165 millimeters. The ground clearance of the 2021 Golf refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Generally, the higher the ground clearance of the 2021 Golf, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. The Golf 8 is a new-generation model (eighth generation) under FAW-Volkswagen, officially debuted at the 2020 (16th) Beijing Auto Show. The dimensions of the 2021 Golf are 4296 mm in length, 1788 mm in width, 1471 mm in height, with a wheelbase of 2636 mm. Typically, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the 2021 Golf is not static; it depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the 2021 Golf. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and driving conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or regions with poor road conditions, a higher ground clearance may be preferable to avoid scraping or damaging the chassis, considering the vehicle's off-road performance.

17

2

Share

What to Do About Squeaky Brakes When Reversing?

How to Check the Thickness of Car Brake Pads?

What is the fuel tank capacity of Foton Tunland in liters?

What is the parts-to-whole ratio of the BMW 3 Series GT?

How Long Does a Car Service Take?

Is the Highlander a product of GAC Toyota or FAW Toyota?

What is the ground clearance of the Golf 8?

How is the safety rating of the BMW 3 Series?

Can Volkswagen CarPlay connect via Bluetooth?

Should You Turn on the AC When Using Car Air Conditioning in Summer?

Is a car carrying 5 adults and 1 child considered overloaded?