What to Do About Scratches on the Car?

1 Answers
DeJanelle
07/24/25 6:16pm
Methods for dealing with scratches on the car: 1. Repair by sanding with sandpaper—clean and dry the scratched area, then gently rub the scratched area with sandpaper dipped in water; 2. Repair using essential balm—pour a small amount of essential balm onto a cloth and repeatedly rub the scratched area; 3. Repair using toothpaste—clean the scratch with a cloth, squeeze toothpaste onto a damp towel or soft sponge, and wipe the scratch up and down; 4. Repair using nail polish—applying a layer of nail polish to the scratch can prevent rusting; 5. Repair using chilled cola—pour a small amount of cola onto a cloth and repeatedly rub the scratched area.
Was this review help?
13
2
Share
More Forum Discussions

Is the ground clearance of the Tiida higher than that of a sedan?

The ground clearance of the Tiida is higher than that of a sedan. Here are the relevant details: 1. Ground clearance: The minimum ground clearance refers to the distance between the car and the ground on a flat surface when fully loaded. The minimum ground clearance of the Tiida should be around 166-167mm. The chassis height (minimum ground clearance) of a sedan typically ranges from 11 cm to 15 cm. 2. The larger the minimum ground clearance: The better the vehicle's ability to pass over obstacles or uneven terrain, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower the center of gravity, which can enhance stability.
7
3
Share

Why is the Ruixing m60 so fuel-consuming?

The reasons for the high fuel consumption of Ruixing m60 are as follows: 1、Poor driving habits: Behaviors like squeezing into gaps, sudden stops and starts, or driving at high speeds in low gears can significantly increase fuel consumption. To save fuel, try maintaining a steady speed and rely on inertia braking. 2、Engine carbon deposits: Carbon buildup in the engine can also lead to higher fuel consumption. Consider purchasing automotive products designed to clean carbon deposits to reduce engine carbon buildup and improve fuel efficiency. 3、Low tire pressure: Insufficient tire pressure or under-inflated tires can also cause the vehicle to consume more fuel. Before driving, check the tire inflation. There are instruments available to measure tire pressure, and timely inflation can help reduce fuel consumption.
6
5
Share

Is it effective to pour catalytic converter cleaner into the fuel tank?

Pouring catalytic converter cleaner into the fuel tank is ineffective. Catalytic cleaners only work under high-temperature conditions. At room temperature, the catalytic converter lacks catalytic capability, as its catalyst must be heated to a certain temperature to exhibit oxidation or reduction abilities. Typically, the light-off temperature of a catalytic converter ranges between 250°C to 350°C, with normal operating temperatures between 400°C to 800°C. Below is additional information about catalytic converter cleaners: Cleaning a vehicle's catalytic converter with a dedicated catalytic converter cleaner requires specialized equipment similar to an intravenous drip in hospitals, hence the colloquial term 'drip cleaning' for this process. The cleaning solution is drawn into the engine through the intake vacuum tube via the equipment, passes through the combustion chamber and exhaust pipe to reach the catalytic converter, where it chemically reacts with the deposits on the converter's surface at certain temperatures to achieve the cleaning purpose.
20
5
Share

Why do hybrid battery cooling components require maintenance?

Battery packs are typically installed in the trunk. These battery packs require cooling because they generate heat during charging and discharging processes, necessitating a cooling system to dissipate the heat. After prolonged use, the cooling system needs cleaning to prevent blockages that could lead to excessive battery temperatures. Methods for testing battery condition are as follows: 1. Inspect the battery exterior: Check for bulging, leakage, separator damage, or terminal corrosion. If any of these signs are present, the battery is likely damaged and requires replacement. 2. Measure battery voltage: After two hours of charging, test individual cell voltages every 20 minutes. Readings below 13V indicate potential issues. During discharge, conduct three tests at 10-minute intervals. If a battery discharges significantly faster than others or drops below 10V, it indicates a problem.
20
4
Share

How to Adjust the Dashboard of Zotye Z300?

The dashboard cover of the Zotye Z300 has an adjustment handle, which is used for adjustments, similar to the method used for old electronic watches. The relevant details are as follows: 1. Beneath the dashboard cover of modern vehicles, various indicator or warning lights are installed, such as the coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear indicator, ABS warning light, traction control indicator, airbag warning light, etc. 2. The odometer is a digital instrument that operates through the engagement of the counter drum gear with the worm gear on the speedometer drive shaft, causing the counter drum to rotate. Its characteristic is that when the upper drum completes one full rotation, the lower drum rotates 1/10 of a turn. Similar to the speedometer, modern odometers also include electronic versions, which obtain mileage signals from speed sensors. The accumulated mileage data in electronic odometers is stored in non-volatile memory, ensuring data retention even without power.
8
0
Share

Why Does a Three-Cylinder Engine Vibrate While a Five-Cylinder Doesn't?

Five-cylinder engines and three-cylinder engines have different structures. In a five-cylinder engine, 2.5 cylinders are working during each stroke, which avoids resonance caused by natural frequency. As a result, five-cylinder engines do not produce excessive vibration and shaking like three-cylinder engines. Three-cylinder models: Models include the BMW 318i, Ford Focus, Buick Excelle, Encore, Buick GL6, Chevrolet Cavalier, Chevrolet Cruze, Honda Civic, and Lynk & Co 03. Five-cylinder models: Models equipped with five-cylinder engines include Audi's RS3, TT, RS, as well as Volvo's older S60L and V40.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.