What to Do About High Exhaust Temperature in China VI Vehicles?

2 Answers
JoelMarie
08/26/25 2:44am
Here are solutions for high exhaust temperature in China VI vehicles: 1. First, try driving the vehicle at high speeds: This raises the exhaust system temperature to burn off particles in the particulate filter, improving exhaust flow and effectively alleviating the high-temperature issue. 2. Check if the high exhaust temperature is caused by an overly rich air-fuel mixture. Reasons for high exhaust temperature in China VI vehicles: 1. Overly rich air-fuel mixture in the cylinders: In this case, inspect the oxygen sensor and fuel injection system for faults. If the oxygen sensor fails, the vehicle cannot automatically control the fuel injection amount. 2. Abnormal cylinder pressure and ignition timing: Use a diagnostic tool to read the knock sensor's data stream, then adjust the fuel injection amount and ignition timing based on the data. 3. A slight rise in exhaust temperature at high RPM is normal: Exhaust temperature is typically 30-50°C at idle and around 60-70°C at high RPM.
Was this review help?
18
3
Share
OEmilia
09/08/25 2:46am
I've personally experienced extremely high exhaust temperatures in my China VI diesel vehicle. This is usually normal when the emission system actively raises the temperature to burn off accumulated carbon during DPF filter cleaning. However, excessively high temperatures may indicate problems. Check if it's caused by driving habits - frequent short trips may prevent DPF regeneration, so occasional highway driving or maintaining steady speeds helps complete the burn-off. If temperatures remain abnormally high or warning lights appear, it could indicate sensor failure, exhaust pipe blockage, or cooling system issues. Don't wait until it damages the catalytic converter, as repairs would be extremely costly. First, use an OBD diagnostic tool to read fault codes for basic troubleshooting. Regular maintenance with specialized engine oil can prevent buildup. Safety first - if anything feels wrong, immediately visit a professional repair shop for inspection rather than attempting DIY fixes.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

How Often Should the Battery in a Smart Car Key Be Replaced?

Generally, a new car key can last for two to three years when fully charged. Signs that the car key battery is running low: Reduced effective range: Previously, the car door could be unlocked within a distance of 6 meters, but when the key battery is low, you need to get closer to the car, even right next to the door, for it to respond. This indicates that the car key battery is almost depleted. Occasional remote failure: When using the remote to unlock the car door, it sometimes works and sometimes doesn't. You might need to press the button multiple times for a response, which means the car key battery is nearly dead. Dim indicator light: Observe the indicator light on the key. When you press the button, the light may appear dimmer than usual or flicker intermittently. This is a sign that the battery needs to be replaced.
15
4
Share

What are the causes of a car radiator bursting?

The causes of a car radiator bursting include the use of incompatible coolant with the engine and the absence of coolant. The specific reasons are as follows: Incompatible coolant with the engine: There are many types of coolants, each with different boiling and freezing points. Using a coolant that is not compatible with the engine can lead to poor circulation in the engine's cooling system. The water in the radiator remains in a high-temperature state, and the engine's cooling system has various types, including wet and dry cooling systems. Adding an incompatible coolant can prevent proper circulation, leading to the car radiator bursting. Absence of coolant: The function of coolant is to prevent parts from system failures or cracking due to cooling issues in cold weather. In cold conditions, the material of the radiator changes, and adding coolant can effectively prevent the radiator from bursting.
7
0
Share

Can I Get a Motorcycle License with a Missing Distal Segment of the Right Thumb?

Individuals with a missing distal segment of the right thumb cannot obtain a motorcycle license. However, those with a missing distal segment of a finger or a missing right thumb can apply for a driver's license for small cars, small automatic transmission cars, low-speed trucks, or three-wheeled vehicles. There are physical condition requirements for individuals applying for a driver's license. The requirements for the upper limbs include: both thumbs must be intact, and each hand must have at least three other fingers intact with normal limb and finger movement functions. However, those with a missing distal segment of a finger or a missing right thumb can apply for a driver's license for small cars, small automatic transmission cars, low-speed trucks, or three-wheeled vehicles. Driving with a disability can have an impact and may easily lead to traffic accidents. Therefore, specific requirements have been established for disabled individuals applying for a driver's license, and not all disabled individuals are prohibited from obtaining one.
16
5
Share

Can I Use My Own Car to Practice for Subject 2?

You can use a private car to practice for Subject 2. When practicing, you should carry your driving learning certificate with you, and the self-learning vehicle needs to have a special learning vehicle identification. Practicing Subject 2 requires controlling the speed well and selecting reference points accurately. Controlling the speed well: When performing the hill start and stop, before going uphill, the speed should be slightly faster to give the car a bit of momentum, otherwise it won't be able to climb the slope. Once the rear wheels are on the slope, the speed should be immediately reduced to allow the car to move slowly. Otherwise, if the speed is too fast, first, there won't be enough time to adjust the car's position relative to the side line; second, it will be difficult to align with the reference point for stopping. Selecting reference points accurately: For the front bumper reference point, to ensure that the bumper aligns perfectly with the pole after stopping, you must find the correct reference point. This reference point is usually at the left first section of the right wiper, meaning when the driver sees the left first section of the right wiper align with the pole, stopping at this moment will position the car correctly.
13
3
Share

What is the symbol for car external air circulation?

Car external air circulation symbol is a button on the center console with an arrow pointing from outside the car to inside. External circulation means the blower draws air from outside the car and blows it into the cabin, providing fresh air. However, when the outside air quality is poor or when you need to quickly achieve ideal temperature inside the car, internal circulation should be used. The situation to use external circulation is when you've been using internal circulation for an extended period and it's inconvenient to open windows - you can periodically switch to external circulation to bring fresh air into the cabin. When there are many passengers in the car, using external circulation can maintain air freshness while preventing excessive humidity that might cause window fogging.
17
3
Share

What causes the cylinder head noise in Passat B5?

The causes of cylinder head noise in Passat B5 include piston slap noise, valve noise, and timing gear noise. The details are as follows: Piston slap noise: A dull, rhythmic knocking sound can be heard in the upper-middle part of the engine, which is more distinct during cold starts and idle operation, and significantly diminishes or disappears when the engine reaches normal temperature. Valve noise: A continuous and rhythmic sound is emitted from the top of the engine during operation, most noticeable and clear at idle, and less apparent at high speeds. Timing gear noise: The engine's timing gear may be located at the front or rear of the engine, producing a chaotic noise with distinct metal clashing sounds. In severe cases, the engine timing may become misaligned, preventing startup. Disabling a single cylinder's fuel or ignition has no effect on this noise.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.